ANALISIS PEMOTONGAN PIPA PRODUKSI SUMUR MINYAK DENGAN TEKNIK HYDRAJETTING MENGGUNAKAN FLUIDA ABRASIF DAN POMPA BERTEKANAN TINGGI
DOI:
https://doi.org/10.54378/bt.v15i2.1125Keywords:
Energy Conservation Theory, Hydrajetting, Abrasive FluidAbstract
An oil production well own by Company X had its production declined due to the impact of corrosion and scaling issues which happened on the production tubing. To solve the problem, an immediate action was made to replace the production tubing through a Hydrajetting cutting process which combining the abrasive fluid and high pressure pump application.
The scope of subject were limited to process analyzing and calculation which happened during the production tubing cutting process. Analysis was done through fluid mechanic principle with the usage of the Energy Conservation Theory to get an accurate result of a successful Hydrajetting cutting process for production tubing.
Analysis method was used to calculate all the data which includes fluid velocity, pressure, energy, and all the other related factors. The result of the calculation will be compared to the Hydrajetting recommendation standard.
The result from the analysis will prove and explain a successful Hydrajetting cutting process for production tubing and provide a quality measured solution to solve the problem happened on the oil production well due to damage occurred on its production tubing.
References
Sharlene Lindsay, Hydra-Jet Playbook, Halliburton, Houston, Texas 2011
Muhammad Haekal, BC-PRE-021-2014-V3 GHZL-7 2” HPCT Intervention for Work Over Well, Saudi Arabia, 2014
Barlow’s Formula for theoritical burst perssure tubing, 2016
Halliburton, CAST-M Ultrasonic Tubing Casing Evaluation, Texas 2013
Kementerian Pendidikan dan Kebudayaan Republik Indonesia, Dasar-Dasar Teknik Pengeboran, Jakarta, 2013
Halliburton, Hydra BlastTM - Hydrajetting Pro Cleaning Welbore Tubular, Texas, 2015
Robert Wade Brown, SPE001572 – Theory of Formation Cutting Using Sand Erosion Process, Dallas Texas
Halliburton, 2.88-in. OD HydraBlast ProTM Tool Assembly and Operating Instructions, United States of America, 2008
Halimatuddahliana, Jurnal Pencegahan Korosi Dan Scale Pada Proses Produksi Minyak Bumi, Universitas Sumatera Utara, 2003
Motor Handbook, National Oilwell Varco, Canada, 2007
Dr. Jim B. Surjaatmadja, Technology Bulletin, Best Practive For Proppant Jetting During Fracturing and Hydrajet Perofating and Cutting, Halliburton, Duncan OK, 2011
Rully Ade Iswadi, Jurnal Analisa Pompa Bertekanan Tinggi Untuk Proses Pemotongan Tubing, Jurusan Teknik Mesin, FTI Universitas Jayabaya, 2015
SPF-243 Stimulation Pumper Float – High Pressure Pumping System, Schlumberger, 2006
H09149 Twin Panther PT SDS, Halliburton, 2012
H00924 CAST-M / CBL / MFC, Halliburton, 2013
Downloads
Published
Issue
Section
License
Journal Bina Teknika grants open acces to all of its content, based on that matter makes all research papers published are freely available to public which ensures greater global excchange of knowledge
Journal Bina Teknika is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Refers to these license, all research papers agree to the following terms:
- Attribution - Authors holds the credit of their research works published, in order to use materials from one or more research papers published in Bina Teknika should be given appropriate credit
- Non Commercial - All research papers published in Bina Teknika may not use for commercial purposes
- Share Alike - Any creation made under one or more concepts from research papers published in Bina Teknika should be distribute your contributions under the same license as original
