Research article
Is synthesizing a Cu35Co35Ni20Ti5Al5 high-entropy alloy beyond the rules of solid-solution formation?
- 1 Department of New Science and Technology, Nanomaterials Group, Semnan University, Semnan, Iran
- 2 Department of Materials and Metallurgical Engineering, Semnan University, Semnan, Iran
Abstract
In this research, an attempt was made to produce multi-component nanocrystalline Cu35Co35Ni20Ti5Al5 alloy by mechanical alloying. To produce this high-entropy alloy, the primary powders were milled for 40 h and characterized by XRD, SEM, EDS, and DSC analyses. The milling process has reduced the size of the crystallites to the nanometer scale and a nanostructured multicomponent powder with a crystallite size of 29 nm was obtained. According to the XRD patterns and EDS maps of the milled powder for the longest time, aluminum and copper were homogeneously distributed, cobalt had a less homogeneous distribution than these two elements, but nickel and titanium remained in concentrated spots. Finally, thermodynamic calculations were done to clarify the reason for the impossibility of forming a solid solution for the synthesis of the Cu35Co35Ni20Ti5Al5 high-entropy alloy.
Downloads
Download data is not yet available.
Keywords:
Mechanical alloying, High-entropy alloys, Solid solution, Unsuccessful synthesis, Thermodynamics
References
[1] B.S. Murty, J.-W. Yeh, S. Ranganathan, P.P. Bhattacharjee, High-entropy alloys, 2nd ed., Elsevier. (2019).
[2] M. Murali, S.P.K. Babu, B.J. Krishna, A. Vallimanalan, Synthesis and characterization of AlCoCrCuFeZnx high-entropy alloy by mechanical alloying, Prog. Nat. Sci. Mater. Int. 26 (2016) 380–384. https://doi.org/10.1016/j.pnsc.2016.06.008.
[3] B. Cantor, I.T.H. Chang, P. Knight, A.J.B. Vincent, Microstructural development in equiatomic multicomponent alloys, Mater. Sci. Eng. A. 375–377 (2004) 213–218. https://doi.org/10.1016/j.msea.2003.10.257.
[4] C.-Y. Hsu, J.-W. Yeh, S.-K. Chen, T.-T. Shun, Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl0.5Fe alloy with boron addition, Metall. Mater. Trans. A. 35 (2004) 1465–1469. https://doi.org/10.1007/s11661-004-0254-x.
[5] J.-W. Yeh, S.-K. Chen, S.-J. Lin, J.-Y. Gan, T.-S. Chin, et al., Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes, Adv. Eng. Mater. 6 (2004) 299–303. https://doi.org/10.1002/adem.200300567.
[6] K.-Y. Tsai, M.-H. Tsai, J.-W. Yeh, Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys, Acta Mater. 61 (2013) 4887–4897. https://doi.org/10.1016/j.actamat.2013.04.058.
[7] E.J. Pickering, N.G. Jones, High-entropy alloys: a critical assessment of their founding principles and future prospects, Int. Mater. Rev. 61 (2016) 183–202. https://doi.org/10.1080/09506608.2016.1180020.
[8] H.J. Jiang, C.Y. Liu, B. Zhang, P. Xue, Z.Y. Ma, et al., Simultaneously improving mechanical properties and damping capacity of Al-Mg-Si alloy through friction stir processing, Mater. Charact. 131 (2017) 425–430. https://doi.org/10.1016/j.matchar.2017.07.037.
[9] M. Li, H. Gao, J. Liang, S. Gu, W. You, et al., Microstructure evolution and properties of graphene nanoplatelets reinforced aluminum matrix composites, Mater. Charact. 140 (2018) 172–178. https://doi.org/10.1016/j.matchar.2018.04.007.
[10] R. Feng, P.K. Liaw, M.C. Gao, M. Widom, First-principles prediction of high-entropy-alloy stability, npj Comput. Mater. 3 (2017) 50. https://doi.org/10.1038/s41524-017-0049-4.
[11] J.-W. Yeh, Alloy design strategies and future trends in high-entropy alloys, JOM. 65 (2013) 1759–1771. https://doi.org/10.1007/s11837-013-0761-6.
[12] R. Li, L. Xie, W.Y. Wang, P.K. Liaw, Y. Zhang, High-throughput calculations for high-entropy alloys: A brief review, Front. Mater. 7 (2020) 290. https://doi.org/10.3389/fmats.2020.00290.
[13] S.B. Li, C.B. Wang, L. Li, Q. Shen, L.M. Zhang, Effect of annealing temperature on structural and electrical properties of BCZT ceramics prepared by Plasma Activated Sintering, J. Alloys Compd. 730 (2018) 182–190. https://doi.org/10.1016/j.jallcom.2017.09.310.
[14] C. Niu, A.J. Zaddach, C.C. Koch, D.L. Irving, First principles exploration of near-equiatomic NiFeCrCo high entropy alloys, J. Alloys Compd. 672 (2016) 510–520. https://doi.org/10.1016/j.jallcom.2016.02.108.
[15] J.-W. Yeh, Recent progress in high-entropy alloys, Ann. Chim. Sci. Des. Mater. 31 (2006) 633–648.
[16] J.-W. Yeh, S.-Y. Chang, Y.-D. Hong, S.-K. Chen, S.-J. Lin, Anomalous decrease in X-ray diffraction intensities of Cu–Ni–Al–Co–Cr–Fe–Si alloy systems with multi-principal elements, Mater. Chem. Phys. 103 (2007) 41–46. https://doi.org/10.1016/j.matchemphys.2007.01.003.
[17] M. Vaidya, S. Trubel, B.S. Murty, G. Wilde, S.V. Divinski, Ni tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys, J. Alloys Compd. 688 (2016) 994–1001. https://doi.org/10.1016/j.jallcom.2016.07.239.
[18] Z. Li, K.G. Pradeep, Y. Deng, D. Raabe, C.C. Tasan, Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off, Nature. 534 (2016) 227–230. https://doi.org/10.1038/nature17981.
[19] B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George, R.O. Ritchie, A fracture-resistant high-entropy alloy for cryogenic applications, Science. 345 (2014) 1153–1158. https://doi.org/10.1126/science.1254581.
[20] T.M. Butler, J.P. Alfano, R.L. Martens, M.L. Weaver, High-temperature oxidation behavior of Al-Co-Cr-Ni-(Fe or Si) multicomponent high-entropy alloys, JOM. 67 (2015) 246–259. https://doi.org/10.1007/s11837-014-1185-7.
[21] G. Laplanche, U.F. Volkert, G. Eggeler, E.P. George, Oxidation behavior of the CrMnFeCoNi high-entropy alloy, Oxid. Met. 85 (2016) 629–645. https://doi.org/10.1007/s11085-016-9616-1.
[22] J.H. Zhao, X.L. Ji, Y.P. Shan, Y. Fu, Z. Yao, On the microstructure and erosion–corrosion resistance of AlCrFeCoNiCu high-entropy alloy via annealing treatment, Mater. Sci. Technol. 32 (2016) 1271–1275. https://doi.org/10.1080/02670836.2015.1116494.
[23] R. Sriharitha, B.S. Murty, R.S. Kottada, Phase formation in mechanically alloyed AlxCoCrCuFeNi (x = 0.45, 1, 2.5, 5 mol) high entropy alloys, Intermetallics. 32 (2013) 119–126. https://doi.org/10.1016/j.intermet.2012.08.015.
[24] W. Zhang, P.K. Liaw, Y. Zhang, Science and technology in high-entropy alloys, Sci. China Mater. 61 (2018) 2–22. https://doi.org/10.1007/s40843-017-9195-8.
[25] X.F. Wang, Y. Zhang, Y. Qiao, G.L. Chen, Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys, Intermetallics. 15 (2007) 357–362. https://doi.org/10.1016/j.intermet.2006.08.005.
[26] Y.J. Zhou, Y. Zhang, Y.L. Wang, G.L. Chen, Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties, Appl. Phys. Lett. 90 (2007). https://doi.org/10.1063/1.2734517.
[27] Y. Zhang, Y.J. Zhou, J.P. Lin, G.L. Chen, P.K. Liaw, Solid-solution phase formation rules for multi-component alloys, Adv. Eng. Mater. 10 (2008) 534–538. https://doi.org/10.1002/adem.200700240.
[28] Ł. Rogal, J. Morgiel, Z. Świątek, F. Czerwiński, Microstructure and mechanical properties of the new Nb25Sc25Ti25Zr25 eutectic high entropy alloy, Mater. Sci. Eng. A. 651 (2016) 590–597. https://doi.org/10.1016/j.msea.2015.10.071.
[29] C.S. babu, K. Sivaprasad, V. Muthupandi, J.A. Szpunar, Characterization of nanocrystalline AlCoCrCuNiFeZn high entropy alloy produced by mechanical alloying, Procedi Mater. Sci. 5 (2014) 1020–1026. https://doi.org/10.1016/j.mspro.2014.07.392.
[30] Y. Zhang, T. Zuo, Y. Cheng, P.K. Liaw, High-entropy alloys with high saturation magnetization, electrical resistivity and malleability, Sci. Rep. 3 (2013) 1455. https://doi.org/10.1038/srep01455.
[31] B. Schuh, F. Mendez-Martin, B. Völker, E.P. George, H. Clemens, et al., Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation, Acta Mater. 96 (2015) 258–268. https://doi.org/10.1016/j.actamat.2015.06.025.
[32] S. Praveen, J. Basu, S. Kashyap, R.S. Kottada, Exceptional resistance to grain growth in nanocrystalline CoCrFeNi high entropy alloy at high homologous temperatures, J. Alloys Compd. 662 (2016) 361–367. https://doi.org/10.1016/j.jallcom.2015.12.020.
[33] B.S. Murty, S. Ranganathan, Novel materials synthesis by mechanical alloying/milling, Int. Mater. Rev. 43 (1998) 101–141. https://doi.org/10.1179/imr.1998.43.3.101.
[34] J.S. Benjamin, T.E. Volin, The mechanism of mechanical alloying, Metall. Trans. 5 (1974) 1929–1934. https://doi.org/10.1007/BF02644161.
[35] C. Suryanarayana, Mechanical alloying and milling, Prog. Mater. Sci. 46 (2001) 1–184. https://doi.org/10.1016/S0079-6425(99)00010-9.
[36] C. Wang, W. Ji, Z. Fu, Mechanical alloying and spark plasma sintering of CoCrFeNiMnAl high-entropy alloy, Adv. Powder Technol. 25 (2014) 1334–1338. https://doi.org/10.1016/j.apt.2014.03.014.
[37] K.B. Zhang, Z.Y. Fu, J.Y. Zhang, W.M. Wang, S.W. Lee, K. Niihara, Characterization of nanocrystalline CoCrFeNiTiAl high-entropy solid solution processed by mechanical alloying, J. Alloys Compd. 495 (2010) 33–38. https://doi.org/10.1016/j.jallcom.2009.12.010.
[38] Y.-L. Chen, Y.-H. Hu, C.-A. Hsieh, J.-W. Yeh, S.-K. Chen, Competition between elements during mechanical alloying in an octonary multi-principal-element alloy system, J. Alloys Compd. 481 (2009) 768–775. https://doi.org/10.1016/j.jallcom.2009.03.087.
[39] K.B. Zhang, Z.Y. Fu, J.Y. Zhang, W.M. Wang, H. Wang, et al., Microstructure and mechanical properties of CoCrFeNiTiAl high-entropy alloys, Mater. Sci. Eng. A. 508 (2009) 214–219. https://doi.org/10.1016/j.msea.2008.12.053.
[40] Y.-L. Chen, Y.-H. Hu, C.-W. Tsai, C.-A. Hsieh, S.-W. Kao, et al., Alloying behavior of binary to octonary alloys based on Cu–Ni–Al–Co–Cr–Fe–Ti–Mo during mechanical alloying, J. Alloys Compd. 477 (2009) 696–705. https://doi.org/10.1016/j.jallcom.2008.10.111.
[41] A.M. Rameshbabu, P. Parameswaran, V. Vijayan, R. Panneer, Diffraction, microstructure and thermal stability analysis in a double phase nanocrystalline Al20Mg20Ni20Cr20Ti20 high entropy alloy, J. Mech. Behav. Mater. 26 (2017) 127–132. https://doi.org/10.1515/jmbm-2017-0021.
[42] J.-W. Yeh, S.-J. Lin, T.-S. Chin, J.-Y. Gan, S.-K. Chen, et al., Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements, Metall. Mater. Trans. A. 35 (2004) 2533–2536. https://doi.org/10.1007/s11661-006-0234-4.
[43] Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, et al., Microstructures and properties of high-entropy alloys, Prog. Mater. Sci. 61 (2014) 1–93. https://doi.org/10.1016/j.pmatsci.2013.10.001.
[44] M.-H. Tsai, J.-W. Yeh, High-entropy alloys: A critical review, Mater. Res. Lett. 2 (2014) 107–123. https://doi.org/10.1080/21663831.2014.912690.
[45] T.-T. Shun, L.-Y. Chang, M.-H. Shiu, Microstructure and mechanical properties of multiprincipal component CoCrFeNiMox alloys, Mater. Charact. 70 (2012) 63–67. https://doi.org/10.1016/j.matchar.2012.05.005.
[46] T.-T. Shun, L.-Y. Chang, M.-H. Shiu, Microstructures and mechanical properties of multiprincipal component CoCrFeNiTix alloys, Mater. Sci. Eng. A. 556 (2012) 170–174. https://doi.org/10.1016/j.msea.2012.06.075.
[47] D.B. Miracle, O.N. Senkov, A critical review of high entropy alloys and related concepts, Acta Mater. 122 (2017) 448–511. https://doi.org/10.1016/j.actamat.2016.08.081.
[48] H. Heydari, M. Tajally, A. Habibolahzadeh, Computational analysis of novel AlLiMgTiX light high entropy alloys, Mater. Chem. Phys. 280 (2022) 125834. https://doi.org/10.1016/j.matchemphys.2022.125834.
[49] V. Shivam, J. Basu, Y. Shadangi, M.K. Singh, N.K. Mukhopadhyay, Mechano-chemical synthesis, thermal stability and phase evolution in AlCoCrFeNiMn high entropy alloy, J. Alloys Compd. 757 (2018) 87–97. https://doi.org/10.1016/j.jallcom.2018.05.057.
[50] S. Guo, C. Ng, J. Lu, C.T. Liu, Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys, J. Appl. Phys. 109 (2011). https://doi.org/10.1063/1.3587228.
[51] S. Guo, C.T. Liu, Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase, Prog. Nat. Sci. Mater. Int. 21 (2011) 433–446. https://doi.org/10.1016/S1002-0071(12)60080-X.
Cited By
Submitted
2023-09-29
Published
2023-12-01
How to Cite
Mamnooni, S., Borhani, E., & Heydari, H. (2023). Is synthesizing a Cu35Co35Ni20Ti5Al5 high-entropy alloy beyond the rules of solid-solution formation?. Synthesis and Sintering, 3(4), 226-233. https://doi.org/10.53063/synsint.2023.34177
Issue
Copyright (c) 2023 Samaneh Mamnooni, Ehsan Borhani, Hassan Heydari
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright
Authors are the copyright holders of their published papers in Synthesis and Sintering, which are simultaneously licensed under a Creative Commons Attribution 4.0 International License. The full details of the license are available at https://creativecommons.org/licenses/by/4.0/.
All papers published open access will be immediately and permanently free for everyone to read, download, copy, distribute, print, search, link to the full-text of papers, crawl them for indexing, pass them as data to software, or use them for any other lawful purpose without any registration obstacles or subscription fees.
