Experimental investigations are currently exploring the impact of adding porous layers within burner housing on thermal and exergy efficiency. Specifically, the focus is on understanding the significance of double layers on porous media combustion and how it can improve fuel mixing and flame stability. Premixed butane-air combustion in rich conditions was examined using three different sizes of burners (i.e., 23 mm, 31 mm, and 44 mm) porous media with equivalence ratios ranging from ф = 1.3 to 2.0. The experimental findings revealed a substantial improvement in performance efficiency (thermal and exergy) as the equivalence ratio increased. This study reveals that smaller burner diameters (ID, inner diameter = 23 mm) provide greater efficiency than larger ones (ID = 31 mm and 44 mm). The maximum flame temperature and porous wall temperature are found to decrease as the equivalence ratio increases. The highest temperature measured was 924.82°C for 23 mm, 910.23°C for 31 mm, and 850.76°C for 44 mm at ф = 1.3. Lastly, the thermal and exergy efficiency in a 23 mm porous media burner (PMB) is higher at ф = 2.0 at 84.30% and 83.47%, respectively. It can be concluded that the diameter size of the burner and equivalence ratio for double-layer porous material influence the performance (efficiency) of PMB.

• Cai, T., Zhao, D., & Karimi, N. (2021). Optimizing thermal performance and exergy efficiency in hydrogen-fueled meso-combustors by applying a bluff-body. Journal of Cleaner Production, 311, Article 127573. https://doi.org/10.1016/j.jclepro.2021.127573

• Chen, X., Li, J., Feng, M., Zhao, D., Shi, B., & Wang, N. (2019). Flame stability and combustion characteristics of liquid fuel in a meso-scale burner with porous media. Fuel, 251, 249-259. https://doi.org/10.1016/j.fuel.2019.04.011

• Dai, H., Zhao, Q., Lin, B., He, S., Chen, X., Zhang, Y., Niu, Y., & Yin, S. (2018). Premixed combustion of low-concentration coal mine methane with water vapor addition in a two-section porous media burner. Fuel, 213, 72-82. https://doi.org/10.1016/j.fuel.2017.09.123

• Dhamrat, R. S., & Ellzey, J. L. (2006). Numerical and experimental study of the conversion of methane to hydrogen in a porous media reactor. Combustion and Flame, 144(4), 698-709. https://doi.org/10.1016/j.combustflame.2005.08.038

• Dincer, I., & Bicer, Y. (2020). Chapter 2: Fundamentals of energy systems. In I. Dincer & Y. Bicer (Eds.), Integrated Energy Systems for Multigeneration (pp. 33-83). Elsevier.

• Fan, A., Li, L., Yang, W., & Yuan, Z. (2019). Comparison of combustion efficiency between micro combustors with single- and double-layered walls: A numerical study. Chemical Engineering and Processing – Process Intensification, 137, 39-47. https://doi.org/10.1016/j.cep.2019.02.004

• Gao, H. B., Qu, Z. G., He, Y. L., & Tao, W. Q. (2012). Experimental study of combustion in a double-layer burner packed with alumina pellets of different diameters. Applied Energy, 100, 295-302. https://doi.org/10.1016/j.apenergy.2012.05.019

• Ghorashi, S. A., Hashemi, S. A., Hashemi, S. M., & Mollamahdi, M. (2018). Experimental study on pollutant emissions in the novel combined porous-free flame burner. Energy, 162, 517-525. https://doi.org/10.1016/j.energy.2018.08.005

• Hashemi, S. M., & Hashemi, S. A. (2017). Flame stability analysis of the premixed methane-air combustion in a two-layer porous media burner by numerical simulation. Fuel, 202, 56-65. https://doi.org/10.1016/j.fuel.2017.04.008

• Ismail, A. K., Abdullah, M. Z., Zubair, M., Ahmad, Z. A., Jamaludin, A. R., Mustafa, K. F., & Abdullah, M. N. (2013). Application of porous medium burner with micro cogereration system. Energy, 50, 131-142. https://doi.org/10.1016/j.energy.2012.12.007

• Ismail, N. C., Abdullah, M. Z., Mazlan, N. M., & Mustafa, K. F. (2020). Entropy generation and exergy analysis of premixed fuel-air combustion in microporous media burner. Entropy, 22(10), Article 1104. https://doi.org/10.3390/e22101104

• Janvekar, A. A., Miskam, M. A., Abas, A., Zainal, Z. A., Juntakan, T., & Abdullah, M. Z. (2017). Effects of the preheat layer thickness on surface/submerged flame during porous media combustion of the micro burner. Energy, 122, 103-110. https://doi.org/10.1016/j.energy.2017.01.056

• Javier, E. S., Mehta, S. A., & Moore, R. G. (2003). An experimental study of controlled gas-phase combustion in porous media for enhanced recovery of oil and gas. Journal of Energy Resources Technology, 125, 64-71. https://doi.org/10.1115/1.1510522

• Johar, D. K., Sharma, D., Soni, S. L., Gupta, P. K., & Goyal, R. (2017). Experimental investigation and exergy analysis on thermal storage integrated micro-cogeneration system. Energy Conversion and Management, 131, 127-134. https://doi.org/10.1016/j.enconman.2016.10.075

• Li, Q. Q., Li, J., Shi, J. R., & Guo, Z. L. (2019). Effect of heat transfer on flame stability limits in a planar micro-combustor partially filled with porous medium. Proceedings of the Combustion Institute, 37(4), 5645-5654. https://doi.org/10.1016/j.proci.2018.06.023

• Liu, Y., Fan, A., Yao, H., & Liu, W. (2016). A numerical investigation on the effect of wall thermal conductivity on flame stability and combustion efficiency in a mesoscale channel filled with fibrous porous medium. Applied Thermal Engineering, 101, 239-246. https://doi.org/10.1016/j.applthermaleng.2016.02.099

• Mishra, N. K., & Muthukumar, P. (2018). Development and testing of energy efficient and environment-friendly porous radiant burner operating on liquefied petroleum gas. Applied Thermal Engineering, 129, 482-489. https://doi.org/10.1016/j.applthermaleng.2017.10.068

• Mohseni, S., Nadimi, E., Jafarmadar, S., & Rezaei, R. A. (2021). Enhance the energy and exergy performance of hydrogen combustion by improving the micro-combustor outlet in thermofluidic systems. International Journal of Hydrogen Energy, 46(9), 6915-6927. https://doi.org/10.1016/j.ijhydene.2020.11.114

• Mujeebu, M. A., Abdullah, M. Z., Bakar, M. Z. A., Mohamad, A. A., & Abdullah, M. K. (2009). Application of porous media combustion technology – A review. Applied Energy, 86(9), 1365-1375. https://doi.org/10.1016/j.apenergy.2009.01.017

• Nadimi, E., & Jafarmadar, S. (2019). The numerical study of the energy and exergy efficiencies of the micro-combustor by the internal micro-fin for thermophotovoltaic systems. Journal of Cleaner Production, 235, 394-403. https://doi.org/10.1016/j.jclepro.2019.06.303

• Qu, Z. G., & Feng, X. B. (2015). Catalytic combustion of premixed methane/air in a two-zone perovskite-based alumina pileup-pellets burner with different pellet diameters. Fuel, 159, 128-140. https://doi.org/10.1016/j.fuel.2015.06.066

• Sharma, M., Mahanta, P., & Mishra, S. C. (2016). Usability of porous burner in kerosene pressure stove: An experimental investigation aided by energy and exergy analyses. Energy, 103, 251-260. https://doi.org/10.1016/j.energy.2016.02.100

• Sharma, M., Mishra, S. C., & Acharjee, P. (2009). Thermal efficiency study of conventional pressure stoves equipped with porous radiant inserts. International Energy Journal, 10(4), 247-254.

• Wang, H., Wei, C., Zhao, P., & Ye, T. (2014). Experimental study on temperature variation in a porous inert media burner for premixed methane-air combustion. Energy, 72, 195-200. https://doi.org/10.1016/j.energy.2014.05.024

• Yu, B., Kum, S. M., Lee, C. E., & Lee, S. (2013). Combustion characteristics and thermal efficiency for premixed porous-media types of burners. Energy, 53, 343-350. https://doi.org/10.1016/j.energy.2013.02.035

• Zeng, H., Wang, Y., Shi, Y., Ni, M., & Cai, N. (2017). Syngas production from CO2/CH4 rich combustion in a porous media burner: Experimental characterization and elementary reaction model. Fuel, 199, 413-419. https://doi.org/10.1016/j.fuel.2017.03.003