This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Durability of Advanced Electrically Heated Catalyst Design
Annotation ability available
Sector:
Language:
English
Abstract
Testing was performed on Corning's Generation 3 Electrically Heated Catalyst (EHC) to determine product reliability and durability. A number of functional measurements was performed before and after all electrical, thermal/mechanical and environmental tests. EHCs were also successfully tested on vehicles for 100,000 miles. The results of all tests were favorable and indicated that the new design meets or exceeds requirements.
Recommended Content
Technical Paper | Durability of Extruded Electrically Heated Catalysts |
Technical Paper | Optimization of Extruded Electrically Heated Catalysts |
Technical Paper | An Extruded Electrically Heated Catalyst: From Design Concept through Proven-Durability |
Authors
Citation
Hampton, L., Buhrmaster, C., Thompson, D., and Weiss, D., "Durability of Advanced Electrically Heated Catalyst Design," SAE Technical Paper 960345, 1996, https://doi.org/10.4271/960345.Also In
References
- Weiss, D.S. Buhrmaster, C.L. Hampton, L.E. Powell, W.R. Socha, L.S. “Durability of Extruded Electrically Heated Catalysts,” SAE 950404 February 1995
- Socha, L.S. Thompson, D.F. Weber, P.A. “Optimization of Extruded Electrically Heated Catalysts,” SAE 940468 February 1994
- Laing, P.M. “Development of an Alternator-Powered Electrically-Heated Catalyst System,” SAE 941042 February 1994
- Mizuno, H. Abe, F. Hashimoto, S. Kondo, T. “A Structurally Durable EHC for the Exhaust Manifold,” SAE 940466 February 1994
- Kubush, J.E. Weber, P.A. “Fuel Effects on Emissions from an Advanced Technology Vehicle, Part II,” SAE 940783 February 1994
- Kaiser, F.W. et al. “Optimization of an Electrically Heated Catalytic Converter System Calculations and Application,” SAE 930384 February 1993
- Socha, L.S. Thompson, D.F. Weber, P.A. “Reduced Energy and Power Consumption for Electrically Heated Extruded Metal Converters,” SAE 930383 February 1993
- Socha, L.S. Thompson, D.F. Weber, P.A. “Emissions Performance of Extruded Electrically Heated Catalysts in Several Vehicle Applications,” February 1995
- Reddy, K.P. Gulati, S.T. Lambert, D.L. Schmitt, P.S. Weiss, D.S. “High Temperature Durability of Electrically Heated Extruded Metal Support,” SAE 940782 February 1994
- U.S. CAR “Low Emission Partnership Engineering Specifications; EHC Specification,” February 2 1995