Investigation of Ti-6Al-4V Alloy In Situ Manufactured Using Selective Laser Melting from Elemental Powder Mixture

Igor Polozov; Vadim  Sufiiarov; Anatoliy  Popovich

doi:10.4028/www.scientific.net/SSP.299.646

Paper Titles

Features of the Use of Equilibrium State Diagrams for Description of Crystal Growth from Metastable Melts
p.622

Identification for Technological Capabilities of Titanium and Aluminum Alloys in Deep Drawing Process
p.628

The Research of the Possibilities of Using Purge Methods for the Manufacture of Casting Cores from Mixtures Based on Secondary Polymers and Technical Lignosulphonates
p.634

The Role of the Primary Structure in the Formation of the Mechanical Properties of Steel Castings
p.641

Investigation of Ti-6Al-4V Alloy In Situ Manufactured Using Selective Laser Melting from Elemental Powder Mixture
p.646

Increasing Wear Resistance of Chizel Tools Working Bodies Based on Improving the Metallographic Structure of Grey Cast Iron
p.652

Conceptual Approach to Development, Structure Formation and Hardening Micro-Alloyed by Steels for the Metallurgical Tool
p.658

Arc Steel Furnace Operation at Changing Working Space Aerodynamic Flows
p.664

Comparative Characteristics of Free-Machining Steels of Cr-Mo Type
p.670

HomeSolid State PhenomenaSolid State Phenomena Vol. 299Investigation of Ti-6Al-4V Alloy In Situ...

Investigation of Ti-6Al-4V Alloy In Situ Manufactured Using Selective Laser Melting from Elemental Powder Mixture

Abstract:

This paper presents the results of the study of Selective Laser Melting (SLM) process for the in-situ synthesis of Ti-6Al-4V alloy from elemental powder mixture. Elemental spherical powders of Ti, Al and V were used to prepare a powder mixture, and then bulk specimens were produced by SLM using different process parameters. The effects of SLM process parameters on samples’ relative density, their chemical composition, the formed microstructure and microhardness before and after heat treatment have been studied. It was shown that volume energy density during the SLM process significantly effects the microstructure and microhardness of Ti-6Al-4V obtained from elemental powders. The difference in microstructure morphology and microhardness remains after heat treatment.

You might also be interested in these eBooks

Materials Engineering and Technologies for Production and Processing V

View Preview

Info:

Periodical:

Solid State Phenomena (Volume 299)

Pages:

646-651

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.299.646

Citation:

Cite this paper

Online since:

January 2020

Authors:

Igor Polozov*, Vadim Sufiiarov, Anatoliy Popovich

Keywords:

Additive Manufacturing, Elemental Powders, In Situ Synthesis, Selective Laser Melting (SLM), Ti-6Al-4V

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] A.A. Popovich, et al., Use of additive techniques for preparing individual components of titanium alloy joint endoprostheses, Biomedical Engineering, 50.3 (2016) 202-205.

DOI: 10.1007/s10527-016-9619-x

Google Scholar

[2] Jia, Qingbo, and Dongdong Gu, Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties, Journal of Alloys and Compounds, 585 (2014) 713-721.

DOI: 10.1016/j.jallcom.2013.09.171

Google Scholar

[3] Z.H. Liu, et al., Interfacial characterization of SLM parts in multi-material processing: Metallurgical diffusion between 316L stainless steel and C18400 copper alloy, Materials Characterization, 94 (2014) 116-125.

DOI: 10.1016/j.matchar.2014.05.001

Google Scholar

[4] Baitimerov, Rustam, et al., Influence of Powder Characteristics on Processability of AlSi12 Alloy Fabricated by Selective Laser Melting, Materials, 11.5 (2018) 742.

DOI: 10.3390/ma11050742

Google Scholar

[5] V.G. Smelov, et al., Structure and mechanical properties of parts obtained by selective laser melting of metal powder based on intermetallic compounds Ni3Al, IOP Conference Series: Materials Science and Engineering, 327(4), IOP Publishing, (2018).

DOI: 10.1088/1757-899x/327/4/042124

Google Scholar

[6] Herzog, Dirk, et al., Additive manufacturing of metals, Acta Materialia, 117 (2016) 371-392.

Google Scholar

[7] Fischer, Marie, et al., In situ elaboration of a binary Ti–26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders, Materials Science and Engineering, C 62 (2016) 852-859.

DOI: 10.1016/j.msec.2016.02.033

Google Scholar

[8] Polozov, Igor, et al, Synthesis of Ti-5Al, Ti-6Al-7Nb, and Ti-22Al-25Nb alloys from elemental powders using powder-bed fusion additive manufacturing, Journal of Alloys and Compounds, 763 (2018) 436–445.

DOI: 10.1016/j.jallcom.2018.05.325

Google Scholar

[9] Zhang, Baicheng, Hanlin Liao, and Christian Coddet, Effects of processing parameters on properties of selective laser melting Mg–9% Al powder mixture, Materials & Design, 34 (2012) 753-758.

DOI: 10.1016/j.matdes.2011.06.061

Google Scholar

[10] Kang, Nan, et al., Microstructure and strength analysis of eutectic Al-Si alloy in-situ manufactured using selective laser melting from elemental powder mixture, Journal of Alloys and Compounds, 691 (2017) 316-322.

DOI: 10.1016/j.jallcom.2016.08.249

Google Scholar

[11] Thijs, Lore, et al., A study of the microstructural evolution during selective laser melting of Ti–6Al–4V, Acta materialia, 58.9 (2010) 3303-3312.

DOI: 10.1016/j.actamat.2010.02.004

Google Scholar

[12] A. Popovich, et al., Producing hip implants of titanium alloys by additive manufacturing., International Journal of Bioprinting, 2.2 (2016) 187-193.

Google Scholar