Paper Titles

Modifying of the Surface of Products from Cast Iron as the Element of Production Modernization
p.588

Method of Speed Mode Correction of Rolling Pipes in the Reduction Mill
p.594

The Study of Structure Formation Evolution at High Pressure with a Shear in a Corrosion-Resistant Austenitic-Ferritic Steel 03Kh14N10K5M2YuT with Different Initial States
p.600

Process Development for Solid Fuel Use at Siderite Ore Roasting in Shaft Furnace
p.606

The Phase Composition of Products from Electro-Erosive Cobalto-Chrome Powders, Obtained by Additive Technologies
p.611

Theoretical Justification of the Longitudinal Rolling Method of the Thick Sheets by the Severe Shear Deformation
p.617

Features of the Use of Equilibrium State Diagrams for Description of Crystal Growth from Metastable Melts
p.622

Identification for Technological Capabilities of Titanium and Aluminum Alloys in Deep Drawing Process
p.628

The Research of the Possibilities of Using Purge Methods for the Manufacture of Casting Cores from Mixtures Based on Secondary Polymers and Technical Lignosulphonates
p.634

HomeSolid State PhenomenaSolid State Phenomena Vol. 299The Phase Composition of Products from...

The Phase Composition of Products from Electro-Erosive Cobalto-Chrome Powders, Obtained by Additive Technologies

Article Preview

Abstract:

The main requirement for powders for additive 3d technologies is the spherical shape of the particles. Such particles are most compactly packed into a certain volume and ensure the "fluidity" of the powder composition in the supply systems of the material with minimal resistance. The wide use of the EED method for processing metal waste into powders for the purpose of their reuse and application in additive technologies is hampered by the lack in the scientific and technical literature of full-fledged information on the effect of the initial composition, regimes and media on the properties of powders and technologies of practical application. Therefore, in order to develop technologies for the reuse of electroerosive powders and to evaluate the effectiveness of their use, complex theoretical and experimental studies are required. The aim of the work was to conduct a phase analysis of additive products from electroerosive cobalt-chrome powders. The phase composition of the samples was studied by X-ray diffraction on a Rigaku Ultima IV diffractometer in Cu-Kα radiation (wavelength λ = 0.154178 nm) using Soller slits. Based on the results of the X-ray diffraction analysis of additive articles from electroerosion cobalt-chrome powders, it has been experimentally established that the main phases in the sintered samples are Co, Cr and Co₃C.

You might also be interested in these eBooks

Materials Engineering and Technologies for Production and Processing V

Info:

Periodical:

Solid State Phenomena (Volume 299)

Pages:

611-616

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.299.611

Citation:

Cite this paper

Online since:

January 2020

Authors:

Evgeniy V. Ageev*, A.Y. Altukhov, M. S. Korolyov

Keywords:

Additive Product, Cobalt-Chromium Alloy, Electro-Erosion Dispersion (EED), Phase Composition, Powder, Waste

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

[1] A.A. Lipatov, Russian Engineering Research, 2013, pp.144-149.

[2] A.M. Adaskin, A.A. Vereshchaka, A.S. Vereshchaka, Journal of Friction and Wear, 2013, pp.208-213.

DOI: 10.3103/s1068366613030021

[3] V.L. Bibik, Materials Science Forum, 2013, pp.777-781.

[4] E.V. Azarova, E.A. Levashov, V.G. Ralchenko, A.P. Bolshakov, E.E. Ashkinazi, Metallurgist, 2010, pp.523-529.

DOI: 10.1007/s11015-010-9333-y

[5] Z. Qiao, X. Ma, W. Zhao, H. Tang, B. Zhao, Journal of Alloys and Compounds, 2008, pp.416-420.

[6] S.S. Nayak, S.K. Pabi, M. Wollgarten, J. Banhart, B.S. Murty, Materials Science and Engineering: A, 2010, pp.2370-2378.

DOI: 10.1016/j.msea.2009.12.044

[7] K. Maruyama, T. Nonaka, H.Y. Kim, Intermetallics, 2005, pp.1116-1121.

[8] A. Shenhar, I. Gotman, S. Radin, P. Ducheyne, Ceramics International, 2000, pp.709-713.

DOI: 10.1016/s0272-8842(00)00008-0

[9] L. Loeber, S. Biamino, U. Ackelid, Solid freeform fabrication proceedings, 2011, pp.547-556.

[10] D.D. Gu, W. Meiners, K. Wissenbach, R. Poprawe, International Materials Reviews, 2012, pp.133-164.

[11] Z. Wang, K. Guana, M. Gaoa, Journal of Alloys and Compound, 2012, pp.518-523.

[12] H. Suzuki, K. Tabata, Ya. Kato-Yamada, H. Noji, Sh Takeuchi, Miniaturisation for Chemistry and Biology, 2004, pp.502-505.

[13] V. Swaminathan, R. Wei, D. Gandy, Journal of Engineering for Gas Turbines and Power, 2010, pp.1-8.

[14] Y.W. Son, S. Han, J. Ihm, New Journal of Physics, 2003, p.152.

[15] I.V. Shishkovskii, A.L. Petrov, A.G. Makarenko, Combustion, Explosion, and Shock Waves, 1999, pp.166-170.

DOI: 10.1007/bf02674431

[16] Y. H. Li, R.B. Chen, G. Qi, Z.T. Wang, Z.Y. Deng, Journal of Alloys and Compounds, 2009, pp.215-218.

[17] Yu.I. Mulin, A.D. Verkhoturov, V.D. Vlasenko, Advanced materials, 2006, pp.79-85.

[18] V.I. Ivanov, A.Yu. Kostyukov, Repair. Recovery. Upgrade, 2017, pp.10-17.

[19] A.A. Burkov, Welding production, 2017, pp.33-36.

[20] V.G. Komkov, Welding production, 2013 pp.35-37.

[21] E.V. Ageev, A.S. Osminina, E.V. Ageeva, Journal of nano- and electronic physics, (2013) 04038-1–04038-2.

[22] Ageev, A.V. Kirichek, A.Yu. Altuhov, E.V. Ageeva, Journal of nano- and electronic physics, (2014) 03001-1–03001-4.

[23] E.V. Ageev, R.A. Latypov, Russian Journal of Non-Ferrous Metals, 2014, p.577–580.

[24] E.V. Ageevа, E.V. Ageev, N.M. Horyakova, Russian Engineering Research, 2014, p.694–696.

[25] E.V. Ageevа, E.V. Ageev, N.M. Horyakova, Russian Engineering Research, 2015, p.33–35.

[26] E.V. Ageev, R.A. Latypov, E.V. Ageevа, Russian Journal of Non-Ferrous Metals, 2015, p.52–62.

[27] E.V. Ageevа, I.A. Avilova, N.M. Horyakova, Applied Mechanics and Materials, 2015, p.23–27.

[28] E.V. Ageeva, E.V. Ageev , S.V. Pikalov , E.A. Vorobiev , A.N. Novikov, Journal of nano- and electronic physics, (2015) 04058(2).

[29] E.V. Ageeva, A.Yu. Altukhov , S.V. Khardikov , S.S. Gulidin , A.N. Novikov, Journal of nano- and electronic physics, (2015) 04080(3).