[1]
I. Turku, Characterization of wood plastic composites manufactured from recycled plastic blends, Composite Structures, 161 (2017) 469-476.
DOI: 10.1016/j.compstruct.2016.11.073
Google Scholar
[2]
P.F. Sommerhuber, Life cycle assessment of wood-plastic composites: Analysing alternative materials and identifying an environmental sound end-of-life option, Resources, Conservation and Recycling 117 (2017) 235-248.
DOI: 10.1016/j.resconrec.2016.10.012
Google Scholar
[3]
V.A. Lashkov, Z.G. Sattarova, M.A. Taymarov, M.K. Gerasimov and R.A. Halitov, Modeling of a reduction zone of the gasifier installation, Materials Science and Engineering, 124, (2016).
DOI: 10.1088/1757-899x/124/1/012111
Google Scholar
[4]
D.V. Tuntsev, F.M. Filippova, R.G. Khismatov and N.F. Timerbaev, Pyrolyzates: Products of plant biomass fast pyrolysis, Russian Journal of Applied Chemistry 87 (2014)1367-1370.
DOI: 10.1134/s1070427214090304
Google Scholar
[5]
A.R. Sadrtdinov, R.G. Safin, N.F. Timerbaev, D.F. Ziatdinova and N.A. Saprykina, The development of equipment for the disposal of solid organic waste and optimization of its operation, Materials Science and Engineering, 142, (2016).
DOI: 10.1088/1757-899x/142/1/012095
Google Scholar
[6]
D.V. Tuntsev, R.R. Safin, R.G. Hismatov, R.A. Halitov and V.I. Petrov, Modeling of thermal treatment of wood waste in the gasifiers, Proceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, (2015).
DOI: 10.1109/meacs.2015.7414929
Google Scholar
[7]
A.R. Sadrtdinov, L.M. Esmagilova, V.A. Saldaev, Z.G. Sattarova and A.A. Mokhovikov, Mathematical modeling for the development of equipment for thermochemical processing of wood waste in to dimethyl ether, Materials Science and Engineering, 142, (2016).
DOI: 10.1088/1757-899x/142/1/012094
Google Scholar
[8]
Y. Zhang, Improvement of Mechanical Properties of Wood-Plastic Composite Floors Based on the Optimum Structural Design, Acta Mechanica Solida Sinica, 29. 4 (2016) 444-454.
DOI: 10.1016/s0894-9166(16)30246-4
Google Scholar
[9]
T.H. Yang, Characterization of the property changes of extruded wood–plastic composites during year round subtropical weathering, Construction and Building Materials, 88 (2015) 159-168.
DOI: 10.1016/j.conbuildmat.2015.04.019
Google Scholar
[10]
A. Jamekhorshid, Composite of wood-plastic and micro-encapsulated phase change material (MEPCM) used for thermal energy storage, Applied Thermal Engineering, 112 (2017) 82-88.
DOI: 10.1016/j.applthermaleng.2016.10.037
Google Scholar
[11]
S.Y. Leu, Optimized material composition to improve the physical and mechanical properties of extruded wood–plastic composites (WPCs), Construction and Building Materials, 29 (2012) 120-127.
DOI: 10.1016/j.conbuildmat.2011.09.013
Google Scholar
[12]
V.A. Saldaev, D.B. Prosvirnikov, V.V. Stepanov, A.R. Sadrtdinov and A.N. Kapustin, Equipment for the production of wood-polymeric thermal insulation materials, Materials Science and Engineering, 142, (2016).
DOI: 10.1088/1757-899x/142/1/012097
Google Scholar
[13]
B. Lei, Preparation and characterization of wood–plastic composite reinforced by graphitic carbon nitride, Materials & Design, 66 (2015) 103-109.
DOI: 10.1016/j.matdes.2014.10.041
Google Scholar
[14]
M.A. Binhussain and M.E.T. Maher, Palm leave and plastic waste wood composite for out-door structures, Construction and Building Materials, 47 (2013) 1431-1435.
DOI: 10.1016/j.conbuildmat.2013.06.031
Google Scholar
[15]
F. Daniel and A. Luible, Supporting the development process for building products by the use of research portfolio analysis: A case study for wood plastics composite materials, Case Studies in Construction Materials, 4 (2016) 49-54.
DOI: 10.1016/j.cscm.2015.12.003
Google Scholar
[16]
J.S. Machado, Impact of high moisture conditions on the serviceability performance of wood plastic composite decks, Materials & Design, 103 (2016) 122-131.
DOI: 10.1016/j.matdes.2016.04.030
Google Scholar
[17]
J.S. Felix, C. Domeno and C. Nerin, Characterization of wood plastic composites made from landfill-derived plastic and sawdust: Volatile compounds and olfactometric analysis, Waste management, 33. 3 (2013) 645-655.
DOI: 10.1016/j.wasman.2012.11.005
Google Scholar
[18]
F. Daniel and A. Luible, Investigations on ageing of wood-plastic composites for outdoor applications: A meta-analysis using empiric data derived from diverse weathering trials, Construction and Building Materials, 124 (2016) 1142-1152.
DOI: 10.1016/j.conbuildmat.2016.08.123
Google Scholar
[19]
L. Teuber, M. Holger and A. Krause, Dynamic particle analysis for the evaluation of particle degradation during compounding of wood plastic composites, Composites Part A: Applied Science and Manufacturing, 84 (2016) 464-471.
DOI: 10.1016/j.compositesa.2016.02.028
Google Scholar
[20]
S.K. Najafi, Use of recycled plastics in wood plastic composites: A review, Waste management, 33. 9 (2013) 1898-(1905).
DOI: 10.1016/j.wasman.2013.05.017
Google Scholar
