Paper Titles

Calculation of Modes of Arc Welding under the Flux of Double-Sided Butt Joints
p.889

The Influence of the Electrode Extension on the Welding-Technological Characteristics of Pulsed Arc Welding Using Cored Wire
p.895

Research of Laser Welding of Thin-Sheet Structural Steels by Pulsed Laser Radiation
p.901

The Comparison Research of Plasma Surface Hardening of 34CrNiMo6 Steel Produced on Direct and Reversed Polarity Current
p.906

Research on Welding and Processing Behavior of Electrodes and Features of their Application in "Wet" Underwater Arc Welding
p.913

Kinetics of Residual Stresses in a Welded Frameless Tubular Node
p.921

Effect Study of Thermal Cutting Methods on the Edge’s Microstructure of High-Strength Steel Grade S700MC
p.928

Dependence of Cold Cracks Formation from the Heat Input when Welding of High Strength Steel with Yield Strength of 500 MPa
p.934

Welding of Valve Steels of Different-Sized Cross Sections
p.939

HomeMaterials Science ForumMaterials Science Forum Vol. 946Research on Welding and Processing Behavior of...

Research on Welding and Processing Behavior of Electrodes and Features of their Application in "Wet" Underwater Arc Welding

Article Preview

Abstract:

Three brands of special electrodes for underwater welding were analyzed: LKI-1P, EPS-AN, UW-EZ-2. Experimental data on welding and processing behavior of these types of electrodes in the conditions of underwater arc welding were obtained: melting factor, metal deposit factor and losses. Experiments have been performed to determine the value of the arc breaking length of electrodes when welding under water. A comparative analysis was made with UONII-13/55 electrodes when welding in air conditions.

You might also be interested in these eBooks

Materials Science and Metallurgical Technology

Info:

Periodical:

Materials Science Forum (Volume 946)

Pages:

913-920

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.946.913

Citation:

Cite this paper

Online since:

February 2019

Authors:

Voldemar Muktepavel*, Victor Murzin, Vyacheslav M. Karpov, Artur I. Kurakin

Keywords:

Electrodes for Wet Welding, Underwater Welding, Welding Material, Wet Welding

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

[1] K.K. Khrenov, Elektricheskaya svarka I rezka pod vodoj, Sbornik, posvyashchennyj semidesyatiletiyu so dnya rozhdeniya I pyatidesyatiletiyu nauchnoj deyatel'nosti E.O. Patona. Kiev, (1946) 191-225.

[2] K.K. Hrenov, M.L. Livshic, Elektricheskayadugovayasvarka pod vodoj, Svarshchik. 6 (1934) 26-31.

[3] K.V. Logunov, Podvodnaya svarka I rezkametallov, Sankt-Peterburg, «Zolotojvek», (2003).

[4] S.G. Parshin, Nanostrukturirovannye i aktiviruyushchie materialy dlya dugovoj svarki. SPb.:Izdatel'stvo Politekhnicheskogo universiteta. (2013).

[5] V.V. Murzin, V.L. Russo, Ruchnaya podvodnaya svarka konstrukcij iz stali povyshennoj prochnosti, Svarochnoe proizvodstvo. 1 (1993) 9-12.

[6] V.O. Muktepavel, V.I. Larina, Issledovanie soderzhaniya diffuzionnogo vodoroda v naplavlennom metallepri «mokroj» podvodnoj svarke, Sbornik dokladov nauchno-prakticheskoj konferencii v ramkah XLI Lomonosovskih chtenij v g. Severodvinske. (2013).

[7] V.M. Karpov, D.S. Li, A.O. Voropaev, R.I. Samojlenko, Vliyanie ehlektromagnitnogo peremeshivaniya na strukturu metalla shva, vypolnennogo avtomaticheskoj svarkoj pod vodoj, Morskie intellektual'nye tekhnologii. 26 (2014) 80-83.

[8] A.I. Kurakin, D.S. Li, A.O. Voropaev, M.V. Voropaeva, Mikroprocessornoe upravlenie vneshnim ehlektromagnitnym vozdejstviem na metal svarochnoj vanny, Morskie intellektual'nye tekhnologii. 2 iss.1 (2017) 87-91.

[9] V.M. Karpov, A.V. Vladimirov, V.V. Murzin, Uproshchennoe programmirovanie svarochnyh processov na java-sovmestimom yazyke vvoda komand xml, Morskie intellektual'nye tekhnologii. 26 (2014) 84-91.

[10] S.G. Parshin, A.M. Levchenko, A.S. Majstro, I.S. Antipov, V.M. Karpov, Issledovanie poroshkovyh provolok i svarnyh soedinenij pri podvodnoj mekhanizirovannoj svarke v vodnoj srede, Svarka i diagnostika. 3 (2015) 49-54.

[11] A.I. Kurakin, A.O. Voropaev, M.V. Voropaeva,. Issledovanie vliyaniya sostava shihty poroshkovoj provoloki dlya podvodnoj svarki na parametry naplavlennogo valika, Morskie intellektual'nye tekhnologii. 4 iss.1 (2017) 11-15.

[12] By v. R. Santos, m. J. Monteiro, f. C. Rizzo, a. Q. Bracarense, e. C. P. Pessoa, r. R. Marinho, and l. A. Vieira. Development of an Oxyrutile Electrode for Wet Welding, Welding journal. (2012) 319-328.

DOI: 10.1016/j.jmrt.2022.09.088

[13] Chilov A. Mass spectrometric study of volatile components in mouldpowder : Doctoral Thesis /A. Chilov; Helsinki University of Technology Publications in Materials Science and Metallurgy. – Espoo, (2005).

[14] V.N. Shlepakov, A.S. Kotel'chuk, S.A. Suprun, Identifikaciya sostava poroshkovyh provolok po ehlektricheskim signalam dugovoj svarki, Avtomaticheskaya svarka, 8 (1999) 37-42.

[15] V. YA Kononenko, Tekhnologiya mokroj mekhanizirovannoj svarki pri stroitel'stve MLSP «Prirazlomnaya», Avtomaticheskaya svarka. 9 (2005) 37-39.

[16] I.G. Strukov, E.I. Efimov, Izmerenie i registraciya ehnergeticheskih parametrov v usloviyah nestacionarnogo dugovogo razryada pri svarke, Ehksperimental'nye i teoreticheskie issledovaniya v sovremennoj nauke /Sb. st.pomaterialam XII mezhdunar. nauch.-prakt. konf. Novosibirsk:Izd. ANS «SibAK», 3 iss.12. (2018) 138.

[17] V.V. Murzin, V.L. Russo, S.P. Markov, A.V. Markov, Sostav shihty ehlektrodnogo pokrytiya, Patent № 2071895, (1997) 6.

[18] I.V. Lyahovaya, S.YU. Maksimov, EHlektrod dlya podvodnoj svarki, Patent № 2364483, (2006) 8.