[1]
E.P. Yelsykov, V.A. Barinov, L.V. Ovechkin, Synthesis of disordered Fe3C alloy by mechanical alloying of iron powder with liquid hydrocarbon (toluene), J. Mater. Sci. Letters. 11 (1992) 662-663.
DOI: 10.1007/bf00728898
Google Scholar
[2]
A. Nouri, C. Wen, Surfactants in Mechanical Alloying/Milling: A Catch-22 Situation, Crit. Rev. in Solid State and Mater. Sci. 39 (2014) 81–108.
DOI: 10.1080/10408436.2013.808985
Google Scholar
[3]
S.F. Lomayeva, Structural and phase transformations, thermal stability, and magnetic and corrosive properties of nanocrystalline iron-based alloys obtained by mechanoactivation in organic media, Phys Met Metallogr. 104 (2007) 388-407.
DOI: 10.1134/s0031918x07100092
Google Scholar
[4]
L. Shaw, M. Zawrah, J. Villegas, H. Luo, D. Miracle, Effects of process-control agents on mechanical alloying of nanostructured aluminum alloys, Metall. Mater. Trans. A 34-1 (2003) 159-170.
DOI: 10.1007/s11661-003-0217-7
Google Scholar
[5]
C.J. Rocha, R.M. Leal Neto, V.S. Goncalbes, L.L. Carvalho, F. Ambrozio Filho, An Investigation of the use of Stearic Acid as a Process Control Agent in High Energy Ball Milling of Nb-Al and Ni-Al Powder Mixtures, Mater. Sci. Forum. 416 (2003) 144-149.
DOI: 10.4028/www.scientific.net/msf.416-418.144
Google Scholar
[6]
S. J. Hales and P. Vasquez, Synthesis of Nano-crystalline gamma-TiAl materials, in: Gamma Titanium Aluminides, Y.-W. Kim, H. Clemens and A. H. Rosenberger (Eds.), TMS, Warrendale, PA, (2003) 305-310.
Google Scholar
[7]
S. Kleiner, F. Bertocco1, F.A. Khalid, O. Beffort, Decomposition of process control agent during mechanical milling and its influence on displacement reactions in the Al–TiO2 system, Mater. Chem. and Phys. 89 (2005) 362-366.
DOI: 10.1016/j.matchemphys.2004.09.014
Google Scholar
[8]
G. A.Bowmaker, Solvent-Assisted Mechanochemistry, Chem. Commun. 49 (2013) 334-348.
DOI: 10.1039/c2cc35694e
Google Scholar
[9]
S. Motozuka, M. Tagaya, M. Morinaga, T. Lkoma, T. Yoshioka, and J. Tanaka, Methane adsorption and dissociation on mechanochemically activated iron-particle surfaces. Int. J. Powder Metall.. 48(6) (2012) 21-29.
Google Scholar
[10]
S. Alamohoda, S. Heshmati-Manesh, A Ataie, A.Badiei, Role of process control agents on milling behavior of Al and TiO2 powder mixture to synthesize TiAl/Al2O3 nano composite, Int. J. Mod Phys: Conference Series. 5 (2012) 638-645.
DOI: 10.1142/s2010194512002577
Google Scholar
[11]
C. Machio, H.K. Chikwanda, and S. Chikosha, Effect of process control agent (PCA) on the characteristics of mechanically alloyed Ti-Mg powders, Journal of the Southern African Institute of Mining and Metallurgy. 111 (2011) 149-153.
Google Scholar
[12]
A. Tonejc, C. Kosanovic, M. Stubicar, A. M. Tonejc, B. Subotic, Equivalence of ball milling and thermal treatment for phase transitions in the Al2O3 system, J. Alloys Compd. 204 (1994) L1-L3.
DOI: 10.1016/0925-8388(94)90055-8
Google Scholar
[13]
A.Tonejc, A. M. Tonejc, D. Dužević, Estimation of peak temperature reached by particles trapped among colliding balls in the ball-milling process using excessive oxidation of antimony, Scripta Metall. et Mater. 25(5) (1991) 1111-1113.
DOI: 10.1016/0956-716x(91)90511-x
Google Scholar
[14]
E.V. Shelekhov, T.A. Sviridova, Simulation of the motion and heating of balls in a planetary ball mill. Effect of treatment modes on the products of mechanical activation of Ni and Nb powders. Materialovedenie, 10 (1999) 13-22.
Google Scholar
[15]
J. Eckert, L. Shultz, E. Hellstern, Glass-forming range in mechanically alloyed Ni-Zr and the influence of the milling intensity, J. Appl. Phys. 64 (1988) 3224-3228.
DOI: 10.1063/1.341540
Google Scholar
[16]
F. Pang, Ganes E. Boggs, P.Pulay, G.Fogarazi, The molecular structure of toluene, J. Mol. Struct. 66 (1980) 281-287.
Google Scholar
[17]
Muthana Shanshal and Mustafa M. Muala C-C Bond Cleavage in Aromatic Molecules; Benzene, Toluene and Naphthalene Jordan Journal of Chemistry. 8(2) (2013) 113-124.
DOI: 10.12816/0001522
Google Scholar
[18]
Selected Data of Properties of Hydrocarbons, American Petroleum Institute Research Project 44 (1948).
Google Scholar
[19]
Dana W. Mayo, Foil A. Miller, Robert W. Hannah, Course notes of the interpretation of infrared and Raman spectra, Willey, (2003).
Google Scholar
[20]
K. Nakanishi, Infrared absorption spectroscopy, practical, Holden-Day, Nankodo, Tokyo, Japan, San Francisco, Calif., (1962).
DOI: 10.1126/science.140.3567.648
Google Scholar
[21]
L. J. Bellamy, Advances in Infrared Group Frequencies, Methuen, London, England, (1968).
Google Scholar