[1]
Balamurugan, B., Mehta, B.R. Optical and structural properties of nanocrystalline of copper oxide thin films prepared by activated reactive evaporation. Thin Solid Films, 396, (2001), pp.90-96.
DOI: 10.1016/s0040-6090(01)01216-0
Google Scholar
[2]
Richthofen, A., Domnick, R., Cremer, R., Fresenius, Preparation of cuprite (Cu2O), paramelaconite (Cu32+Cu21+O4) and tenorite (CuO) with magnetron sputtering ion plating: characterization by EPMA, XRD, HEED and SEM, J. Anal. Chem., 358, (1997).
DOI: 10.1007/s002160050415
Google Scholar
[3]
Rai, B. P. Cu2O solar cells: A review. Solar Cells, 25, (1998), pp.265-272.
DOI: 10.1016/0379-6787(88)90065-8
Google Scholar
[4]
Oral, A. Y., Mensur, E., Aslan, M. H., Basaran, E. The preparation of copper(II) oxide thin films and the study of their microstructures and optical properties, Materials Chemistry and Physics, 83, (2004), pp.140-144.
DOI: 10.1016/j.matchemphys.2003.09.015
Google Scholar
[5]
Mahalingam, T., Chitra, J. S. P., Rajendran, S., Jayachandran, M., Chockalingam, M. J., Galvanostatic deposition and characterization of cuprous oxide thin films, Journal of Crystal Growth, 216, (2000), pp.304-310.
DOI: 10.1016/s0022-0248(00)00416-4
Google Scholar
[6]
Musa, A. O., Akomolafe, T., Carter, M. J., Production of cuprous oxide, a solar cell material, by thermal oxidation and a study of its physical and electrical properties, Solar Energy Materials and Solar Cells, 51, (1998), pp.305-316.
DOI: 10.1016/s0927-0248(97)00233-x
Google Scholar
[7]
Gosh, S., Avasthi, D. K., Shah, P., Ganesan, V., Gupta, A., Sarangi, D., Bhattacharya, R., Assmann, W., Deposition of thin films of different oxides of copper by RF reactive sputtering and their characterization, Vacuum, 57, (2000), pp.377-385.
DOI: 10.1016/s0042-207x(00)00151-2
Google Scholar
[8]
Armelao, L., Barreca, D, Bertapelle, M., Bottaro, G., Sada, C., Tondello, E., A sol-gel approach to nanophasic copper oxide thin films, Thin Solid Films, 442, (2003), pp.48-52.
DOI: 10.1016/s0040-6090(03)00940-4
Google Scholar
[9]
Serin, N., Serin, T., Horzum, S., Celik, Y., Annealing effects on the properties of copper oxide thin films prepared by chemical deposition, Semicond. Sci. Technol., 20, (2005), pp.398-401.
DOI: 10.1088/0268-1242/20/5/012
Google Scholar
[10]
Ohya, Y., Ito, S, Ban, T., Takahashi, Y., Preparation of CuO thin films and their electrical conductivity, Key Eng. Mater., 181, (2000), pp.113-116.
DOI: 10.4028/www.scientific.net/kem.181-182.113
Google Scholar
[11]
Kajihara, K., Yao, T., Macroporous morphology of the titania films prepared by a sol-gel dip-coating method from the system containing poly(ethylene glycol). IV. General principle of morphology formation and effect of heat treatment, J. Sol-Gel Sci. Tech., 17 (2), (2000).
DOI: 10.1023/a:1008602419045
Google Scholar