Paper Titles

Preface and Organizing Committee

Study of Microstructure, Texture and Residual Stress in Asymmetrically Rolled Titanium
p.1

Improving Beamtime Efficiency for Residual Stress Neutron Experiments
p.7

Engineering & Related Studies at J-PARC
p.12

The Role of Metallurgical Solid State Phase Transformations on the Formation of Residual Stress in Laser Cladding and Heating
p.19

Quantification and Prediction of Residual Stresses in Creep Crack Growth Specimens
p.25

A Mirror Furnace for In Situ Residual Stress Measurements by Neutron Diffraction
p.31

Thermal-Effect Study on a Carbon-Carbon Composite Using Synchrotron X-Ray Measurements & Molecular Dynamics Simulation
p.35

Residual Stress Distributions at High Strength Steel Welds Prepared by Low Transformation Temperature (LTT) and Conventional Welding Consumables
p.40

HomeMaterials Science ForumMaterials Science Forum Vol. 777Engineering & Related Studies at J-PARC

Engineering & Related Studies at J-PARC

Article Preview

Abstract:

Current status of a dedicated neutron diffractometer (TAKUMI) for investigations of stresses and crystallographic structures in engineering components, that has been built at Materials and Life Science Facility of J-PARC, was introduced as well as the engineering studies done there. Several topics recently performed at TAKUMI were selected to be introduced; internal strains in an ITER central solenoid conductor sample, internal strains in a rebar embedded in an air-cured concrete, deformation behavior of TRIP steels at RT and tensile behavior of LPSO MgZnY alloys. These topics and the relevant results showed that TAKUMI is a powerful neutron diffractometer for various engineering studies.

You might also be interested in these eBooks

Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VII

Info:

Periodical:

Materials Science Forum (Volume 777)

Pages:

12-18

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.777.12

Citation:

Cite this paper

Online since:

February 2014

Authors:

Stefanus Harjo*, Kazuya Aizawa, Jun Abe, Wu Gong, Takayoshi Ito, Takuro Kawasaki, Takaaki Iwahashi

Keywords:

Concrete, LPSO, Martensitic Transformation (MT), Mg Alloy, Nb₃Sn, Rebar, Stress, Superconductor, Time-of-Flight Neutron Diffractometer, TRIP Steel

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

[1] S. Harjo, T. Ito, K. Aizawa, H. Arima, J. Abe, A. Moriai, T. Iwahashi and T. Kamiyama, Mater. Sci. Forum 681 (2011) 443-448.

DOI: 10.4028/www.scientific.net/msf.681.443

[2] T. Ito, T. Nakatani, S. Harjo, H. Arima, J. Abe, K. Aizawa and A. Moriai, Mater. Sci. Forum 652 (2010) 238-242.

DOI: 10.4028/www.scientific.net/msf.652.238

[3] T. Hemmi, Y. Nunoya, Y. Nabara, M. Yoshikawa, K. Matsui, H. Kajitani, K. Hamada, T. Isono, Y. Takahashi, N. Koizumi, H. Nakajima, B. Stepanov, P. Bruzzone, IEEE Trans. Appl. Supercond. 22 (2012) 4803305 (5pp).

DOI: 10.1109/tasc.2011.2178370

[4] T. Hemmi, S. Harjo, Y. Nunoya, H. Kajitani, N. Koizumi, K. Aizawa, S. Machiya and K. Osamura, Supercond. Sci. Technol. 26 (2013) 084002 (6pp).

DOI: 10.1088/0953-2048/26/8/084002

[5] N. Martovetsky, D. Hatﬁeld, J. Miller, P. Bruzzone, B. Stepanov and B. Seeber B, IEEE Trans. Appl. Supercond. 20 (2010) 466–469.

[6] H. Suzuki, M. Kanematsu and K. Kusunoki, Powder Diffraction Suppl. 24 (2009) S68 (4pp).

[7] M. Kanematsu, T. Ohta, H. Suzuki and T. Noguchi, Proceedings of the Japan Concrete Institute 33 (2011) 1853-1858 in Japanese.

[8] H. Suzuki, K. Kusunoki, Y. Hatanaka, T. Mukai, A. Tasai, M. Kanematsu, K. Kabayama and S Harjo, submitted to Meas. Sci. Technol.

DOI: 10.1088/0957-0233/25/2/025602

[9] S. Harjo, Y. Tomota, P. Lukas, D. Neov, M. Vrana, P. Mikula, and M. Ono, Acta mater. 49 (2001) 2471-2479.

DOI: 10.1016/s1359-6454(01)00147-1

[10] O. Muransky, P. Sittner, J. Zrnik, E.C. Oliver, Acta mater. 56 (2008) 3367-3379.

[11] S. Harjo, N. Tsuchida, W. Gong, J. Abe and K. Aizawa, Mater. Res. Soc. Symp. Proc. 1528 (2013)

DOI: 10.1557/opl.2013.570

[12] Z.H Cong, N. Jia, X. Sun, Y. Ren, J. Almer and Y.D. Wang, Metall. Mater. Trans. A, 40A 1383-1387 (2009).

[13] Y. Kawamura, K. Hayashi, A. Inoue and T. Matsumoto, Mater. Trans. 42 (2001) 11721176.

[14] K. Aizawa, W. Gong, S. Harjo, J. Abe, T. Iwahashi and T. Kamiyama, Mater. Trans. 54 (2013) 1083-1086.

[15] W. Gong, K. Aizawa, S. Harjo, J. Abe, T. Iwahashi and T. Kamiyama, Mater. Trans. 54 (2013) 974-976.

DOI: 10.2320/matertrans.mi201215