Discussion about the Cr-Mo Steel Materials Using in CNG Cylinders

Song Huang; Shu Tao Xiong; Zhong Guo Zhao

doi:10.4028/www.scientific.net/MSF.1001.235

Paper Titles

Preparation of TiO₂ Powder and the Study of Photocatalytic Activity
p.191

Research on the Long-Lasting and Remelting Properties of Nd Modification Effect on Cast Al-Mg₂Si Metal Matrix Composite
p.196

Preparetion and Quantitative Analysis of Programmable Polyester Fiber
p.202

Modeling of Annealing Heat Treatment Parameters for Zr Alloy Tube by ANN-Ga
p.207

Leaching Kinetics of Gold Involved in the System S₂O₃^2--EDTA-Cu²⁺
p.212

Effect of β-Cyclodextrin and Ammonium Polyphosphate on Flame Retardancy of Jute/Polypropylene Composites
p.219

Study on Preparation and Properties of PA6/TiO₂-GO Composites
p.224

Effect of Surface Treatment on XPS Test of Graphene Films
p.229

Discussion about the Cr-Mo Steel Materials Using in CNG Cylinders
p.235

HomeMaterials Science ForumMaterials Science Forum Vol. 1001Discussion about the Cr-Mo Steel Materials Using...

Discussion about the Cr-Mo Steel Materials Using in CNG Cylinders

Abstract:

This study analyzes the properties of different Cr-Mo steels using in CNG cylinders was discussed in this paper. It is shown that 34CrMo4 has finer microstructure, higher hardness, higher tensile properties and better hydrostatic pressure burst results. As the material for CNG gas cylinders, the advantages of 34CrMo4 are more obvious.

You might also be interested in these eBooks

Materials Science and Industrial Applications II

View Preview

Info:

Periodical:

Materials Science Forum (Volume 1001)

Pages:

235-239

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.1001.235

Citation:

Cite this paper

Online since:

July 2020

Authors:

Song Huang*, Shu Tao Xiong, Zhong Guo Zhao

Keywords:

Cr-Mo Steels, Gas Cylinders, Mechanical Properties, Microstructure

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] P . Davies, D. Choqueuse, B. Bigourdan, P, Chauchot, Composite Cylinders for Deep Sea Applications: An Overview, Journal of Pressure Vessel Technology-Transactions of the Asme 138(2016) 060904.

DOI: 10.1115/1.4033942

Google Scholar

[2] H.L. Li, X.L. Xue, X.Y. Tang, Research progress on safety supervision technology of gas cylinders. China Special Equipment, 5(2015)26-34.

Google Scholar

[3] Z.Y. Liu. Relevant issues in the installation and inspection of taxi CNG cylinder. China Special Equipment Safety 2(2015)35-37.

Google Scholar

[4] ISO 11439 Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles.

DOI: 10.3403/02419622

Google Scholar

[5] GB 18248 Seamless tubes of gas cylinders.

Google Scholar

[6] C.D Wei, J.C. Zhao, Gradient temperature heat treatment for efficient study of phase precipitation in a high-temperature Fe-Cr-Mo ferritic steel, Materialia, 3(2018)31-40.

DOI: 10.1016/j.mtla.2018.10.003

Google Scholar

[7] Z.Q. Cui, China Metallurgy and heat treatment, (2000).

Google Scholar