Finite Element Analysis of Incremental Sheet Forming for Metal Sheet

Muhammad Sajjad; Jithin Ambarayil Joy; Dong Won Jung

doi:10.4028/www.scientific.net/KEM.783.148

Paper Titles

Potential of Modified Corn Cob (Zea mays L.) and Petai Hull (Parkia hassk) as New Biosorbent for Removal of Lead Waste
p.126

Effect of Rotating Tool Geometry on Mechanical Properties of Friction Stir Welded Aluminum Alloy 2195
p.132

On the Latest Development of some Typical Cathode Materials for Lithium Ion Battery
p.137

Preparation and Thermoelectric Properties of Bi Doped Ca₃Co₄O₉ Based Thermoelectric Materials
p.144

Finite Element Analysis of Incremental Sheet Forming for Metal Sheet
p.148

Wear Characteristics of Self-Damping Conductors for Large Crossing
p.154

Effect of Copper on Formability and Weldability of SUS 430J 1L Steel for Bead Forming of Drum
p.159

Simulation of Crack Propagation in Concrete Based on Extended Finite Element Method
p.165

Hydrochemistry Research of Intercrystalline with Pore Brine and Pre-3D Modelling of Heibeiwadi Brine Deposit
p.170

HomeKey Engineering MaterialsKey Engineering Materials Vol. 783Finite Element Analysis of Incremental Sheet...

Finite Element Analysis of Incremental Sheet Forming for Metal Sheet

Abstract:

Incremental sheet metal forming, is a non-conventional machining process which offers higher formability, flexibility and low cost of production than the traditional conventional forming process. Punch or tool used in this forming process consecutively forces the sheet to deform locally and ultimately gives the target profile. Various machining parameters, such as type of tool, tool path, tool size, feed rate and mechanical properties of sheet metal, like strength co-efficient, strain hardening index and ultimate tensile strength, effects the forming process and the formability of final product. In this research paper, Single Point Incremental Forming was simulated using Dassault system’s Abaqus 6.12-1 and results are obtained. Results of sheet profile and there change in thickness is investigated. For this paper, we simulated the process in abaqus. The tool diameter and rotational speed is find out for the production of parts through incremental forming. The simulation is done for two type of material with different mechanical properties. Various research papers were used to understand the process of incremental forming and its simulation.

You might also be interested in these eBooks

International Conference on Material Science and Engineering III

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 783)

Pages:

148-153

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.783.148

Citation:

Cite this paper

Online since:

October 2018

Authors:

Muhammad Sajjad, Jithin Ambarayil Joy, Dong Won Jung*

Keywords:

Abaqus, Formability, Profile, Simulation, SPIF, Thickness

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] J. M. Allwood, D. R. Shouler, Generalised forming limit diagrams showing increased forming limits with non-planar stress states. Int. J. Plast. 25(7) (2009) 1207-1230.

DOI: 10.1016/j.ijplas.2008.11.001

Google Scholar

[2] L. V. Sy, Modelling of single point incremental forming process for metal and polymeric sheet, PhD thesis, University of padua, (2009).

Google Scholar

[3] Y. H. Kim, J. J. Park, Fundamental studies on the incremental sheet metal forming technique. J. Mater. Proc. Tech. 140 (1-3) (2003) 447-453.

Google Scholar

[4] L. Filice, L. Fratini, F. Micari, Analysis of material formability in incremental forming, CIRP Ann. Manuf. Technol. 51(1) (2002) 199–202.

DOI: 10.1016/s0007-8506(07)61499-1

Google Scholar

[5] J. J. Park, Y. H. Kim, Fundamental studies on the incremental sheet metal forming technique, J. Mater. Proc. Tech. 140(1-3) (2003) 447-453.

Google Scholar

[6] L. Fratini, G. Ambrogio, R. D. Lorenzo, L. Filice, and F. Micari, Influence of mechanical properties of the sheet material on formability in single point incremental forming. CIRP Ann. Manuf. Tech. 53(1) (2004) 207–210.

DOI: 10.1016/s0007-8506(07)60680-5

Google Scholar