[1]
R. M. Fernández-Domene, E. Blasco-Tamarit, D. M. García-García, and J. García-Antón, Effect of Alloying Elements on the Electronic Properties of Thin Passive Films Formed on Carbon Steel, Ferritic and Austenitic Stainless Steels in a Highly Concentrated LiBr Solution, Thin Solid Films, vol. 558, pp.252-258, (2014).
DOI: 10.1016/j.tsf.2014.03.042
Google Scholar
[2]
S. M. Elsariti, and Haftirman, Behaviour of Stress Corrosion Cracking of Austenitic Stainless Steels in Sodium Chloride Solutions, Procedia Engineering, vol. 53, pp.650-654, (2013).
DOI: 10.1016/j.proeng.2013.02.084
Google Scholar
[3]
AKSteel, Stainless Steel 316/316L Product Data Bulletin, pp.2-4, (2013).
Google Scholar
[4]
D. Kianersi, A. Mostafaei, and A. A. Amadeh, Resistance Spot Welding Joints of AISI 316L Austenitic Stainless Steel Sheets: Phase Transformations, Mechanical Properties and Microstructure Characterizations, Materials and Design, vol. 61, pp.251-253, (2014).
DOI: 10.1016/j.matdes.2014.04.075
Google Scholar
[5]
N. Karimzadeh, E.G. Moghaddam, M. Mirjani, and K. Raeissi, The Effect of Gas Mixture of Post-Oxidation on Structure and Corrosion Behavior of Plasma Nitrided AISI 316 Stainless Steel, Applied Surface Science, vol. 283, pp.584-589, (2013).
DOI: 10.1016/j.apsusc.2013.06.152
Google Scholar
[6]
A. -R. Grayeli-Korpi, and H. Savaloni, Effect of Nitrogen Ion Implantation on Corrosion Inhibition of Nickel Coated 316 Stainless Steel and Correlation with Nano-Structure, Applied Surface Science, vol. 258, pp.9982-9988, (2012).
DOI: 10.1016/j.apsusc.2012.06.060
Google Scholar
[7]
L. Ceschini, C. Chiavari, E, Lanzoni, and C. Martini, Low-Temperature Carburised AISI 316L Austenitic Stainless Steel: Wear and Corrosion Behaviour, Materials and Design, vol. 38, pp.154-160, (2012).
DOI: 10.1016/j.matdes.2012.02.019
Google Scholar
[8]
H. Yang, X. Wu, Z. Yang, S. Pu, and H. Wang, Enhanced Boronizing Kinetics of Alloy Steel Assisted By Surface Mechanical Attrition Treatment, Journal of Alloys and Compounds, vol. 590, pp.388-395, (2014).
DOI: 10.1016/j.jallcom.2013.12.151
Google Scholar
[9]
I. Gunes, S. Ulker, and S. Taktak, Plasma Paste Boronizing of AISI 8620, 52100 and 440C Steels, Materials and Design, vol. 32, pp.2380-2386, (2011).
DOI: 10.1016/j.matdes.2010.11.031
Google Scholar
[10]
I. Jauhari, H.A.M. Yusof, and R. Saidan, Superplastic Boronizing of Duplex Stainless Steel under Dual Compression Method, Materials Science and Engineering A, vol. 528, pp.8106-8110, (2011).
DOI: 10.1016/j.msea.2011.07.054
Google Scholar
[11]
T. Balusamy, T. S. N. Sankara Narayanan, K. Ravichandran, I. Song Park, and M. H. Lee, Pack Boronizing of AISI H11 Tool Steel: Role of Surface Mechanical Attrition Treatment, Vacuum, vol. 97, pp.36-43, (2013).
DOI: 10.1016/j.vacuum.2013.04.006
Google Scholar
[12]
M. H. M. Basir, B. Abdullah, S. K. Alias, M. H. M. Jumadin, and M. H. Ismail, Analysis on Microstructure, Hardness and Surface Roughness of Shot Blasted-Paste Boronized 316 Austenitic Stainless Steel, Jurnal Teknologi, (2015).
DOI: 10.11113/jt.v76.5515
Google Scholar
[13]
M. H. M. Basir, B. Abdullah, and S. K. Alias, Wear Properties of Paste Boronized 316 Stainless Steel Before and After Shot Blasting Process, Scientific Research Journal, vol. 11, No. 2, (2014).
DOI: 10.24191/srj.v11i2.5425
Google Scholar
[14]
M. Khairulmaini, S. K. Alias, B. Abdullah, J. M. Said, N. Sulong, M. Mazni and N. Jenal, "Single and Double Shot Blasting Treatment of 304 Stainless Steel. Jurnal Teknologi, (2015).
DOI: 10.11113/jt.v76.5646
Google Scholar
[15]
W. D. Callister, Materials Science and Engineering: An Introduction, Sixth Edit. John Wiley & Sons, Inc., (2003).
Google Scholar
[16]
B. Arifvianto, Suyitno, M. Mahardika, P. Dewo, P. T. Iswanto, and U. A. Salim, Effect of Surface Mechanical Attrition Treatment (SMAT) on Microhardness, Surface Roughness and Wettability of AISI 316L, Mater. Chem. Phys., vol. 125, pp.418-426, (2011).
DOI: 10.1016/j.matchemphys.2010.10.038
Google Scholar
