Application of Different Dispersants in Fabricating Ti(C,N)-Based Cermet Tool Materials

Qing Zhong Xu; Xing Ai; Jun Zhao; Feng Gong; Xian Hua Tian; Hong Shan Zhang

doi:10.4028/www.scientific.net/KEM.693.535

Paper Titles

The Analysis of Longitudinal Impact Response for Variable Cross-Section Rod
p.504

The Vibration Features Analysis on Special Computer
p.511

The Process Research and Numerical Simulation of Composite Roll
p.520

An In Situ Raman Spectroscopy Study of Load Transfer for Carbon Nanotube Film
p.529

Application of Different Dispersants in Fabricating Ti(C,N)-Based Cermet Tool Materials
p.535

Carbon Nanotubes Decorated by Carbon Nanospheres through Hydrocarbon Ion Deposition
p.541

Cellular Automaton Modeling of Dynamic Recrystallisation Microstructure Evolution for 316LN Stainless Steel
p.548

Design of Nano/Micro-Structured Diamond Coating on Cemented Carbide
p.554

Drawing Die Preparation of Composite Diamond Coating Based on Nb Interlayer
p.560

HomeKey Engineering MaterialsKey Engineering Materials Vol. 693Application of Different Dispersants in...

Application of Different Dispersants in Fabricating Ti(C,N)-Based Cermet Tool Materials

Abstract:

A good dispersion of powders is crucial to obtain the sintered materials with superior properties. In this paper, the application of different dispersants in fabricating Ti (C,N)-based cermets was investigated. The effect of dispersant on the microstructure and mechanical properties of cermet materials was studied by observing the microstructure, indention cracks and fracture morphology using scanning electron microscope (SEM), and by measuring the transverse rupture strength (TRS), Vickers hardness (HV) and fracture toughness (K_IC). The results reveal that the dispersant oleic acid is helpful for the dispersion of Ti (C,N)-based cermet powders, and can contribute to the homogeneous microstructure and stable mechanical properties of the cermet materials. Compared with the cermets fabricated with polyethylene glycol (PEG), the microstructure of cermets fabricated with oleic acid shows more homogeneously distributed Ti (C,N) particles embedded into more evenly spread binder phases without agglomerations of Ti (C,N) grains. The cermets fabricated with oleic acid possess better comprehensive mechanical properties, with higher transverse rupture strength, hardness and a bit lower fracture toughness than the cermets fabricated with PEG.

You might also be interested in these eBooks

Advanced Materials and Manufacturing Technology II

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 693)

Pages:

535-540

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.693.535

Citation:

Cite this paper

Online since:

May 2016

Authors:

Qing Zhong Xu*, Xing Ai, Jun Zhao, Feng Gong, Xian Hua Tian, Hong Shan Zhang

Keywords:

Dispersant, Mechanical Properties, Microstructure, Ti(C,N)-Based Cermets

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] H.J. Zhou, C.Z. Huang, B. Zou, H.L. Liu, H.T. Zhu, P. Yao, J. Wang: Materials Science and Engineering A Vol. 618 (2014), pp.462-470.

Google Scholar

[2] S. Cardinal, A. Malchere, V. Garnier, G. Fantozzi: International Journal of Refractory Metals and Hard Materials Vol. 27 (2009), pp.521-527.

DOI: 10.1016/j.ijrmhm.2008.10.006

Google Scholar

[3] A. Rajabi, M.J. Ghazali, J. Syarif, A.R. Daud: Chemical Engineering Journal Vol. 255 (2014), pp.445-452.

Google Scholar

[4] Q.Z. Xu, X. Ai, J. Zhao, W.Z. Qin, Y.T. Wang, F. Gong: Journal of Alloys and Compounds Vol. 619 (2015), pp.538-543.

Google Scholar

[5] R.M. Raihanuzzaman, Z.H. Xie, S.J. Hong, R. Ghomashchi: Powder Technology Vol. 261 (2014), pp.1-13.

Google Scholar

[6] C.H. Yi, H.Y. Fan, J. Xiong, Z.X. Guo, G.B. Dong, W.C. Wan, H.S. Chen: Ceramics International Vol. 39 (2013), pp.503-509.

Google Scholar

[7] Y. Peng, H. Miao, Z. Peng: International Journal of Refractory Metals and Hard Materials Vol. 39 (2013), pp.78-89.

Google Scholar

[8] F. Monteverde, V. Medri, A. Bellosi: Journal of the European Ceramic Society Vol. 22 (2002), pp.2587-2593.

DOI: 10.1016/s0955-2219(02)00120-6

Google Scholar

[9] J.M. Córdoba, E. Chicardi, F.J. Gotor: Journal of Alloys and Compounds Vol. 559 (2013), pp.34-38.

Google Scholar

[10] N. Liu, W.H. Yin, L.W. Zhu: Materials Science and Engineering A Vol. 445-446 (2007), pp.707-716.

Google Scholar

[11] Z.M. Shi, D.Y. Zhang, S. Chen, T.L. Wang: Journal of Alloys and Compounds Vol. 568 (2013), pp.68-72.

Google Scholar