Influence of Granulation of Powder Charge of Titanium-Boron on Regularities of Self-Propogating High-Temperature Synthesis of Porous Materials

D.I. Andriyanov; Aleksandr P. Amosov; A. Samboruk

doi:10.4028/www.scientific.net/KEM.685.500

Paper Titles

SLS Setup and its Working Procedure
p.477

Evaluation of the Effect of LED-Lamp Spectral Content on the Development of Greenhouse Tomato
p.482

The Possibility of Manufacturing Long-Length Metal Products with Ultra-Fine Grain Structure by Combination of Strain Effects
p.487

Design of Composite Wire for Arc Welding and Ni₃Al-Based Alloys Surfacing
p.495

Influence of Granulation of Powder Charge of Titanium-Boron on Regularities of Self-Propogating High-Temperature Synthesis of Porous Materials
p.500

Wear-Resistant Coatings Reinforced with TiB₂ Micro-Particles and TiCN Nano-Sized Particles
p.505

Two-Step Synthesis of Tungsten and Molybdenum Disulfides
p.511

Morphology of Aluminum Nanopowder Combustion Products in a Magnetic Field in Air
p.516

The Influence of Aluminium Nanopowder Density on the Structure and Properties of its Combustion Products in Air
p.521

HomeKey Engineering MaterialsKey Engineering Materials Vol. 685Influence of Granulation of Powder Charge of...

Influence of Granulation of Powder Charge of Titanium-Boron on Regularities of Self-Propogating High-Temperature Synthesis of Porous Materials

Abstract:

The results of studies of fabrication of porous titanium boride TiB by self-propagating high-temperature synthesis (SHS) using ordinary (not granular) and granular initial powder charge titanium-boron are presented. The influence of the amount of titanium in the charge, the granule size and the pressure of compaction of the charge on the structure, porosity, phase composition and compression strength of the resulting porous materials is described. The results of studies were obtained with the use of the scanning electron microscope, diffractometer and universal testing machine.

You might also be interested in these eBooks

High Technology: Research and Applications 2015

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 685)

Pages:

500-504

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.685.500

Citation:

Cite this paper

Online since:

February 2016

Authors:

D.I. Andriyanov, Aleksandr P. Amosov, A. Samboruk

Keywords:

Boron, Granulation, Porous Materials, Self-Propagating High-Temperature Synthesis, Titanium

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] P.A. Vityaz. L.P. Pilinevich, V.V. Mazyuk, A.L. Rak et al. (Eds. ), Porous powder materials with anisotropic structure: methods of preparation, Tonpik, Minsk, 2005. (in Russian).

Google Scholar

[2] V.E. Gunter, Titanium nickelide. Medical material of a new generation, Publishing House of the MIC, Tomsk, 2006. (in Russian).

Google Scholar

[3] Makoto Kobashi, Naoyuki Kanetake, Influence of precursor preparation on cell structure of porous Ti composite, 16th International Conference on Composite Materials, Kyoto, Japan, (2007).

Google Scholar

[4] A.P. Amosov, A.G. Makarenko, A.R. Samboruk, B.S. Seplyarskii, A.A. Samboruk, I.O. Gerasimov, A.V. Orlov, and V.V. Yatsenko, Effect of batch pelletizing on a course of SHS reactions: an overview, Int. J. of Self-Propagating High-Temperature Synthesis, 19, 1 (2010).

DOI: 10.3103/s1061386210010127

Google Scholar

[5] D.I. Andriyanov, A.P. Amosov, A.R. Samboruk, D.M. Davydov, V.S. Ishchenko, Development of porous composite self-propagating high-temperature ceramics of the Ti–B–C system, Russian J. of Non-Ferrous Metals, 55, 5 (2014) 485-488.

DOI: 10.3103/s1067821214050034

Google Scholar