Magnetovision Method for Determining the Martensite Phase in the Austenite in Cylindrical and Spherical Objects as a Result of the Cyclic Loads

Jerzy Kaleta; Rafał Mech; Monika Rikitatt; Przemyslaw Wiewiorski; Wojciech Wisniewski

doi:10.4028/www.scientific.net/KEM.598.86

Paper Titles

The Simulation of Void Growth along Curvilinear Crack Front
p.63

High Power Actuator Based on Magnetostrictive Composite Core with Temperature Drift Compensation
p.69

The Use of Magnetostrictive Cores for the Vibrations Generation and Energy Harvesting from Vibration, in the Selected Frequencies of Work
p.75

Investigations of Magnetorheological Elastomers Subjected to Cyclic Loading
p.81

Magnetovision Method for Determining the Martensite Phase in the Austenite in Cylindrical and Spherical Objects as a Result of the Cyclic Loads
p.86

Hertzian Crack Propagation in Ceramic Rolling Elements
p.92

Specifics Deformation Aluminium Alloy D16 in Conditions Additional Load Impulse
p.99

Fatigue Behaviour of S235JR Steel after Surface Frictional-Mechanical Treatment in Corrosive Environment
p.105

Effect of Critical Void Volume Fraction f_F on Results of Ductile Fracture Simulation for S235JR Steel under Multi-Axial Stress States
p.113

HomeKey Engineering MaterialsKey Engineering Materials Vol. 598Magnetovision Method for Determining the...

Magnetovision Method for Determining the Martensite Phase in the Austenite in Cylindrical and Spherical Objects as a Result of the Cyclic Loads

Abstract:

The subject of the study was to investigate the application potential of the magnetovision method for detecting martensitic transformation in solid samples (3D). The main goal of this research was to develop a system for tracking changes on the surface of the material during cyclic loading (fatigue of the material) and visualization of the results. As a part of that work a dedicated software GR2R-Mag was developed. It was designed to support experiments with use of a goniometer adapted for magnetic measurements. Based on the obtained results it was shown that the proposed testing method is useful for determination of the martensite phase in austenite in spherical objects during cyclic loading. By adaptation of the goniometer for magnetic field measurements, it was possible to measure the value of magnetic field around the spherical and cylindrical objects in a polar coordinates.

You might also be interested in these eBooks

14th Fracture and Fatigue of Materials and Structures

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 598)

Pages:

86-91

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.598.86

Citation:

Cite this paper

Online since:

January 2014

Authors:

Jerzy Kaleta, Rafał Mech*, Monika Rikitatt, Przemyslaw Wiewiorski, Wojciech Wisniewski

Keywords:

3D Manipulator, Magnetism, Magnetovision, Martensitic Transformation (MT), Serial Interface

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] J. Kaleta, P. Wiewiorski, W. Wisniewski, Magnetovision method of monitoring of martensitic transformation induced by plastic deformation (in polish), Proc. XXIII Sympozjum Zmeczenie i Mechanika Pekania, Bydgoszcz, (2010) 61-62.

Google Scholar

[2] J. Kaleta, P. Wiewiorski, W. Wisniewski, Methods of investigating martensitic transformation induced by plastic deformation in bulk specimens, Proc. 26th DANUBIA-ADRIA Symp. on Advances in Experimental Mechanics, Leoben, (2009) 93-94.

Google Scholar

[3] J. Kaleta, P. Wiewiorski, W. Wisniewski, Magnetic method of investigating martensitic transformation induced by cyclic plastic deformation in AISI 304 steel (in polish), Proc. XXII Sympozjum Zmeczenie i Mechanika Pekania, Bydgoszcz, (2008) 139-145.

Google Scholar