[1]
M. Mori, T. Abe, H. Itoh, O. Yamamoto, Y. Takeda, T. Kawahara, Cubic-stabilized zirconia and alumina composites as electrolytes in planar type solid oxide fuel-cells, Solid State Ionics 74 (1994) 157-164.
DOI: 10.1016/0167-2738(94)90206-2
Google Scholar
[2]
A.A.E. Hassan, N.H. Menzler, G. Blass, M.E. Ali, H.P. Buchkremer, D. Stöver, Influence of alumina dopant on the properties of yttria-stabilized zirconia for SOFC applications, J. Mater. Sci. 37 (2002) 3467-3475.
DOI: 10.1023/a:1016563123018
Google Scholar
[3]
E.P. Butler, J. Drennan, Microstructural analysis of sintered high-conductivity zirconia with Al2O3 additions, J. Amer. Ceram. Soc. 65 (1982) 474-478.
DOI: 10.1111/j.1151-2916.1982.tb10336.x
Google Scholar
[4]
K.C. Radford, R.J. Bratton, Zirconia electrolyte cells - Part 1: Sintering studies, J. Mater. Sci. 14 (1979) 59-65.
DOI: 10.1007/bf01028328
Google Scholar
[5]
H. Bernard, Sintered Stabilized Zirconia Microstructure and Conductivity, Report R-5090, Commissariat à l' Energie Atomique, CEN-Saclay, France, (1981).
Google Scholar
[6]
S. Tekeli, The solid solubility limit of Al2O3 and its effect on densification and microstructural evolution in cubic-zirconia used as an electrolyte for solid oxide fuel cell, Mater. Design 28 (2007) 713-716.
DOI: 10.1016/j.matdes.2005.09.011
Google Scholar
[7]
M. Miyayama, H. Yanagida, A. Asada, Effect of Al2O3 addition on resistivity and microstructure of yttria-stabilized zirconia, Am. Ceram. Soc. Bull. 64 (1986) 660-664.
Google Scholar
[8]
M. Mori, T. Abe, H. Itoh, O. Yamamoto, Y. Takeda, T. Kawahara, Cubic-stabilized zirconia and alumina composites as electrolytes in planar type solid oxide fuel cells, Solid State Ionics 74 (1994) 157-164.
DOI: 10.1016/0167-2738(94)90206-2
Google Scholar
[9]
A.J. Feighery, J.T.S. Irvine, Effect of alumina additions upon electrical properties of 8 mol% yttria-stabilized zirconia, Solid State Ionics 121 (1999) 209-216.
DOI: 10.1016/s0167-2738(99)00015-6
Google Scholar
[10]
S.Y. Yang, J.J. Lee, J.J. Kim, J.S. Lee, Sintering behavior of Y-doped ZrO2 ceramics: The effect of Al2O3 and Nb2O5 addition, Solid State Ionics 172 (2004) 413-416.
DOI: 10.1016/j.ssi.2004.03.026
Google Scholar
[11]
L. M. Navarro, P. Recio, P. Duran, Preparation and properties evaluation of zirconia based/Al2O3 composites as electrolytes for solid oxide fuel cell systems - Part 1: Powder preparation and characterization, J. Mater. Sci. 30 (1995) 1931-(1938).
DOI: 10.1007/bf00353015
Google Scholar
[12]
L. M. Navarro, P. Recio, P. Duran, Preparation and properties evaluation of zirconia based/Al2O3 composites as electrolytes for solid oxide fuel cell systems - Part 2: Sintering behaviour and microstructural development, J. Mater. Sci. 30 (1995).
DOI: 10.1007/bf00353016
Google Scholar
[13]
G. Ye, F. Ju, C. Lin, S. Gopalan, U. Pal, Single-step co-firing technique for SOFC fabrication Ceram. Eng. Sci. Proc. 26 (2005) 25-32.
DOI: 10.1002/9780470291245.ch3
Google Scholar
[14]
S. Wu, Sintering Additives for Zirconia Ceramics, Research Reports in Materials Science, Volume 7, Parthenon Press, Carnforth, (1986).
Google Scholar
[15]
S. Tekeli, U. Demir, Colloidal processing, sintering and static grain growth behavior of alumina-doped cubic zirconia, Ceram. Int. 31 (2005) 973-980.
DOI: 10.1016/j.ceramint.2004.10.011
Google Scholar
[16]
V.V. Srdic, M. Winterer, H. Hahn, Sintering behavior of nanocrystalline zirconia doped with alumina prepared by chemical vapor synthesis, J. Am. Ceram. Soc. 83 (2000) 1853-1860.
DOI: 10.1111/j.1151-2916.2000.tb01481.x
Google Scholar
