[1]
Jonathan Weidow, Effect of metal and cubic carbide additions on interface chemistry, phase composition and grain growth in WC-Co based cemented carbides (Phd Thesis), CHALMERS University of Technology, Sweden (2010).
Google Scholar
[2]
Vinod Sarin, Comprehensive Hard Materials,Vol.1 Elsevier (2014).
Google Scholar
[3]
Carla Barbatti, José Garcia, Pedro Brito, Anke Rita Pyzalla, Influence of WC replacement by TiC and (Ta,Nb)C on the oxidation resistance of Co-based cemented carbides, Int. Journal of Refractory Metals & Hard Materials 27 768–776, (2009).
DOI: 10.1016/j.ijrmhm.2008.12.009
Google Scholar
[4]
García, J., Ciprés, V. C., Blomqvist, A., & Kaplan, B. Cemented carbide microstructures: a review. International Journal of Refractory Metals and Hard Materials (2018).
DOI: 10.1016/j.ijrmhm.2018.12.004
Google Scholar
[5]
Gopal S. Upadhyaya, CEMENTED TUNGSTEN CARBIDES Production, Properties, and Testing, Indian Institute of Technology Kanpur, India Copyright by Noyes Publications (1998).
Google Scholar
[6]
Kyong H. Lee, Seung I. Cha, Byung K. Kim, Soon H. Hong, Effect of WC/TiC grain size ratio on microstructure and mechanical properties of WC–TiC–Co cemented carbides , International Journal of Refractory Metals & Hard Materials, 24 109–114, (2006).
DOI: 10.1016/j.ijrmhm.2005.04.018
Google Scholar
[7]
Norgren, S., García, J., Blomqvist, A., & Yin, L. Trends in the P/M hard metal industry. International Journal of Refractory Metals and Hard Materials, 48, 31-45, (2015).
DOI: 10.1016/j.ijrmhm.2014.07.007
Google Scholar
[8]
Weidow, J., Johansson, S., Andrén, H. O., & Wahnström, G.Transition metal solubilities in WC in cemented carbide materials. Journal of the American Ceramic Society, 94(2), 605-610, (2011).
DOI: 10.1111/j.1551-2916.2010.04122.x
Google Scholar
[9]
Pötschke, J., Gestrich, T., & Richter, V. Grain growth inhibition of hardmetals during initial heat-up. International Journal of Refractory Metals and Hard Materials,72, 117-125, (2018).
DOI: 10.1016/j.ijrmhm.2017.12.016
Google Scholar
[10]
A.G.P Da Silva, et al., A low temperature synthesized NbC as grain growth inhibitor for WC–Co composites, Materials Science and Engineering, A293, pp.242-246, (2000).
DOI: 10.1016/s0921-5093(00)00993-x
Google Scholar
[11]
B. Wittman, et al., WC grain growth and grain growth inhibition in nickel and iron binder hardmetals, Int. J. Refractory Metals and Hard Materials, Vol. 20,pp.51-60, (2002).
DOI: 10.1016/s0263-4368(01)00070-1
Google Scholar
[12]
S. Luyckx, et al., Fine grained WC-VC-Co hardmetal, Powder Metallurgy, Vol. 39, ,pp.210-212, (1996).
DOI: 10.1179/pom.1996.39.3.210
Google Scholar
[13]
D.S. Konadu, et al., The corrosion behaviour of WC-VC-Co hardmetals in acidic media, Corrosion Science, Vol. 52, pp.3118-3125, (2010).
DOI: 10.1016/j.corsci.2010.05.033
Google Scholar
[14]
Luyckx, S., Whitefield, D. J., Witcomb, M. J., & Cornish, L. The development of WC-VC-Co hard metal: a review of past work and new results. International Conference and Exhibition on Powder Metallurgy and Particulate Materials, (1998).
DOI: 10.1179/pom.1996.39.3.210
Google Scholar
[15]
Arenas, F., De Arenas, I. B., Ochoa, J., & Cho, S. A. Influence of VC on the microstructure and mechanical properties of WC–Co sintered cemented carbides. International Journal of Refractory Metals and Hard Materials, 17(1-3), 91-97, (1999).
DOI: 10.1016/s0263-4368(98)00061-4
Google Scholar
[16]
Weidow, J., & Andrén, H. O. Grain and phase boundary segregation in WC–Co with TiC, ZrC, NbC or TaC additions. International Journal of Refractory Metals and Hard Materials,29(1), 38-43, (2011).
DOI: 10.1016/j.ijrmhm.2010.06.010
Google Scholar
[17]
Sheikh, S., M'Saoubi, R., Flasar, P., Schwind, M., Persson, T., Yang, J., & Llanes, L. Fracture toughness of cemented carbides: Testing method and microstructural effects. International Journal of Refractory Metals and Hard Materials49, 153-160, (2015).
DOI: 10.1016/j.ijrmhm.2014.08.018
Google Scholar
[18]
Chen, L., Lengauer, W., Ettmayer, P., Dreyer, K., Daub, H. W., & Kassel, D. Fundamentals of liquid phase sintering for modern cermets and functionally graded cemented carbonitrides (FGCC). International Journal of Refractory Metals and Hard Materials, 18(6), 307-322, (2000).
DOI: 10.1016/s0263-4368(00)00041-x
Google Scholar
[19]
ISO, S. N. 4505: Hardmetals–Metallographic Determination of Porosity and Uncombined Carbon. British Standard BS EN, 24505, (1993).
Google Scholar
[20]
Dutkiewicz, J., Szutkowska, M., Leśniewski, W., Wieliczko, P., & Pieczara, A.The effect of TiC on structure and hardness of WC-Co composites prepared using various consolidation methods. Composites Theory and Practice, 14(2), 91-95, (2014).
Google Scholar
[21]
Frisk, K., Dumitrescu, L., Ekroth, M., Sunduman, B., Jansson, B., & Kruse, O, Development of a database for cemented carbides: thermodynamic modeling and experiments. Journal of Phase Equilibria, 22, 645–655, (2001).
DOI: 10.1007/s11669-001-0028-8
Google Scholar