Effect of Compatibilizers on Mechanical Thermal and Morphology Properties of HDPE/TiO2 Nanocomposites

Article Preview

Abstract:

This work studies the effect of PE-g-MA compatibilizer on mechanical thermal and morphological properties of high density polyethylene (HDPE)/titanium dioxide (TiO2) nanocomposites. The HDPE/TiO2 nanocomposites with and without PE-g-MA compatibilizer were prepared by melt mixing technique in a twin screw extruder. The results found that Young's Modulus of HDPE/TiO2 nanocomposites increased with increasing TiO2 contents. The addition of PE-g-MA compatibilizer had no significant effect on the tensile strength and stress at break of HDPE/TiO2 nanocomposites. The decomposition temperatures of HDPE/TiO2 nanocomposites before and after adding PE-g-MA compatibilizer increased with increasing TiO2 contents. The dispersion of TiO2 nanoparticles in HDPE matrix was observed by scanning electron microscope (SEM). The dispersion of nanoparticles in HDPE matrix with PE-g-MA compatibilizer was relatively good, only a few aggregates exited.

You might also be interested in these eBooks

Info:

Periodical:

Advanced Materials Research (Volumes 93-94)

Pages:

169-172

Citation:

Online since:

January 2010

Export:

Price:

[1] D. Olmos, C. Domı´nguez, P.D. Castrillo and J. Gonzalez-Benito: Polymer Vol. 50 (2009), p.1732.

Google Scholar

[2] H. Masami, T. Hiroaki, M. Mineo and K. Tadashi: Mater. Res. Bull. Vol. 41 (2006), p.515.

Google Scholar

[3] C. Vladuta, M. Voinea, E. Purghel and A. Duta: Mater. Sci. and Eng. B Vol. 10 (2009), p.1010.

Google Scholar

[4] J. QIAN and P. HE: J. Mater. Sci. Vol. 38 (2003), p.2299.

Google Scholar

[5] K. Ono, T. Yamamuro, T. Nakamura and T. Kokubo: Biomaterials Vol. 11 (1990), p.265.

Google Scholar

[6] S. Bose and P.A. Mahanwar: Jmmce. Org. Vol. 3 (2004), p.23 (a) (b) (c).

Google Scholar