Experimental Research of Biomass Pyrolysis Characteristics at Low Temperature

Kai Wang; Jian Guo Jiang; Rong Feng Sun

doi:10.4028/www.scientific.net/AMR.860-863.522

Paper Titles

Effects of Primary Settling Tank on Denitrifying Phosphorus Removal in a Full-Scale AAO Process
p.506

Dynamic Model of Rapeseed Oil Hydrolysis Reaction in Sub-Critical Water
p.510

Unconventional Type of Biomass Suitable for the Production of Biofuels
p.514

Co-Pyrolysis Charateristics Study of Dianchi Lake Sludge and Coal
p.518

Experimental Research of Biomass Pyrolysis Characteristics at Low Temperature
p.522

Preparation of Activated Carbon from Formic Acid Hydrolysis Residue by Chemical Activation of ZnCl₂
p.527

Potassium Solubility of the Fly Ash from Corn Straw Power Plant
p.534

Economic Analysis of Biogas Cogeneration Systems of Medium-Sized Breeding Plants
p.538

Marginal Land-Based Biomass Energy Production in Yellow River Delta
p.544

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 860-863Experimental Research of Biomass Pyrolysis...

Experimental Research of Biomass Pyrolysis Characteristics at Low Temperature

Abstract:

The pyrolysis characteristics for two types biomass material was tested at 230°C~250°C, and the pyrolysis product component was on-line analyzed by using moisture micro-detection teller, gas chromatograph-mass spectrometer computer and fourier transform infrared spectroscopy. Besides, two different algorithms were used to evaluate the test error. In addition, the generated tar gas was secondary decomposed at 800°C. It is found that the tar was broken up completely, which increased the hydrogen content sharply in the pyrolysis gas. The test data shows that the heat value of cotton stalk improves better than that of the corn stalk after pyrolysis, so it is more suitable for cotton stalk than corn stalk to improve the value in use by means of low temperature pyrolysis technology.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 860-863)

Pages:

522-526

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.860-863.522

Citation:

Cite this paper

Online since:

December 2013

Authors:

Kai Wang*, Jian Guo Jiang, Rong Feng Sun

Keywords:

Biomass, Component Analyze, Low Temperature Pyrolysis

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] Fonseca Felfi F., Luengo CA., Suarez JA., et al. Wood briquette torrefaction [J]. Energy for Sustainable Development, 2005, 9 (3): 19-22.

Google Scholar

[2] Bergman PCA. Combined torrefaction and pelletisation: The TOP process [R]. Energy research Centre of the Netherlands (ECN), Unit ECN Biomass, ECN Report: ECN-C-05-073.

Google Scholar

[3] Bergman PCA., Boersma A. R., Kiel J. H. A., et al. Torrefaction for entrained-flow gasification of biomass [R]. Second world Biomass Conference, Rome, Italy, 10-14 May (2004).

Google Scholar

[4] Phanphanich M., Mani S. Impact of torrefaction on the grindability and fuel characteristics of forest biomass [J]. Bioresour. Technol. 2010, 102 (2): 1246-1253.

DOI: 10.1016/j.biortech.2010.08.028

Google Scholar

[5] Prins MJ., Frans KJP., Janssen JJG. Torrefaction of wood Part 1: Weight loss kinetics [J]. Journal of analytical and applied pyrolysis, 2006, 77 (1): 28-34.

Google Scholar