[1]
Samia S. Mir, Syed M. N. Hasan, Md. J. Hossain, and Mahbub Hasan (2011), Chemical Modification Effect on the Mechanical Properties of Coir Fiber, Engineering Journal, Volume 16 Issue 2, Department of Materials and Metallurgical Engineering, Bangladesh University of Engineering and Technology, Bangladesh.
DOI: 10.15282/ijame.14.1.2017.9.0319
Google Scholar
[2]
Nasrul, H., Nairul A. (2008), Mechanical Properties of Polystyrene/ Polypropylene Reinforced Coconut and Jute Fibers, Faculty of Mechanical Engineering & Manufacturing, University of Tun Hussein Onn Malaysia, proceeding paper Curtin University Technology, Science, and Engineering (CUTSE) International Conference 2008, 24-27 November 2008, Miri.
DOI: 10.30880/ijie.2019.11.05.022
Google Scholar
[3]
Yang, H.S., Kim, H.J., B.J. and Hawng, T.S. (2004), Rice husk flour filled polypropylene composites; mechanical and morphological study, Compos. Struct. 63:305-312.
DOI: 10.1016/s0263-8223(03)00179-x
Google Scholar
[4]
Yang, H.S., Kim, H.J., B.J. and Hawng, T.S. (2007), Effect of compatibilizing agent on rice husk flour reinforced polypropylene composites, Compos. Struct. 77:45-55.
DOI: 10.1016/j.compstruct.2005.06.005
Google Scholar
[5]
Karmaker, A.C and Youngquist, J.A. (1996), Injection moulding polypropylene reinforced with short jute fibers. J. Appl. Poly. Sci. 62:1142-1151.
DOI: 10.1002/(sici)1097-4628(19961121)62:8<1147::aid-app2>3.0.co;2-i
Google Scholar
[6]
Bettini, S. H. P.; Bicudo, A. B. L.C.; Augusto. I. A.; Antunes, L. A.; Morassi, P. L.; Condotta, R. & Bonse, B. C. (2010), Investigation on the use of coir fiber as alternative reinforcement in polypropylene. Journal of Applied Polymer Science, Vol. 118, pp.2841-2848, ISSN 1359-835X.
DOI: 10.1002/app.32418
Google Scholar
[7]
Suddell, B. C. Evans, W. J. (2005), Chapter 7 natural fiber composite in automotive applications, in natural fibers, biopolymers and biocomposites. Mohanty et al. (Ed.) Taylor & Francis Group, Florida pp.237-297.
DOI: 10.1201/9780203508206.ch7
Google Scholar
[8]
Salmah, H., Ruzaidi C.M. and Supri A.G. (2009), Compatibilisation of polypropylene/ethylene propylene Diene Terpolymer/Kaolin Composites: The Effect of Maleic Anhydride-Grafted-Polypropylene, Journal of Physical Science, Vol. 20(1), 99-107.
DOI: 10.4028/www.scientific.net/kem.594-595.770
Google Scholar
[9]
Lee, B H, Kim, H J and Yu, W R. (2009), Fabrication of Long and Discontinuous Natural Fiber Reinforced Polypropylene Biocomposites and Their Mechanical Properties, Fiber and Polymers, Vol. 10, pp.83-90.
DOI: 10.1007/s12221-009-0083-z
Google Scholar
[10]
Tengku Faisal Z. H., Faisal Amri and Iqmal Tahir (2010), Effect of Maleic Anhydride Polypropylene on the properties of coconut shell filled thermoplastics elastomeric olefin composites. School of Material Engineering Malaysia Perlis, 02600 Jejawi Perlis Malaysia.
DOI: 10.22146/ijc.21453
Google Scholar
[11]
Supri A.G. and B. Y. Lim. (2009), Effect of Treated and Untreated Filler Loading on the Mechanical, Morphological, and Water Absorption Properties of Water Hyacinth Fibers-Low Density Polyethylene Composites. School of Materials Engineering, Universiti Malaysia Perlis, UniMAP, 01000 Kangar, Perlis, Malaysia. Journal of Physical Science, Vol. 20(2), 85-96.
DOI: 10.36868/ejmse.2020.05.03.133
Google Scholar
[12]
Salmah H. (2005), The Effects of Paper Sludge and Calcium Carbonate on Tensile Properties and Water Absorption of Polypropylene (PP)/Ethylene Propylene Diene Terpolymer (EPDM) Composites, Department of Chemical Engineering, Faculty of Engineering University of Sumatera Utara, Medan, Jurnal Teknologi Proses, Volume 5, pg. 53-57.
DOI: 10.4028/www.scientific.net/kem.594-595.770
Google Scholar
[13]
D. Cantero, L.E. Romero, I.d Ory. (2004), Optimization of immobilization conditions for vinegar production. Siran, wood chips and plyurethane foam as carries for Acetobacter aceti. Journal of Process Biochemistry, Vol. 36, pp.547-555.
DOI: 10.1016/s0032-9592(03)00136-5
Google Scholar