Application in the Experimental Data Analysis of the Slag Viscosity with Minitab Software

Shu Qing Zhang; Xiu Ling Lv; Li Hong Zhang; Na Hui Zhang

doi:10.4028/www.scientific.net/AMR.753-755.1857

Paper Titles

Research on the Effect of Load on the Fatigue Tearing of the Elastic Element
p.1836

Comparison Study of Membrane Flapping Wing Based on Mooney-Rivlin Model and Linear Model
p.1842

Scattering of SH-Wave by an Interface Cylindrical Elastic Inclusion with a Semicircular Debonded above Subsurface Cavity
p.1846

Study on Slot Bottom Size of Stringing Pulley Based on Reducing Conductor Abrasion
p.1851

Application in the Experimental Data Analysis of the Slag Viscosity with Minitab Software
p.1857

Analysis of Factors Affecting Safety Management of Construction Site Based on Fuzzy Factor Analysis Model
p.1862

Research on SysML-Based Modeling for Production Management System
p.1868

Research for Technology in Distributed Manufacturing with Resource Collaboration
p.1875

Measurement of Bulk Modulus and Study of its Impact on Transport Characteristics for Dense Paste
p.1882

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 753-755Application in the Experimental Data Analysis of...

Application in the Experimental Data Analysis of the Slag Viscosity with Minitab Software

Abstract:

The single factor variance of viscosity experimental data of blast furnace slag was calculated by Minitab software. The influence of slag basicity and chemical compositions on the slag viscosity was obtained. The results show that there have insignificant effects on the slag viscosity when the slag basicity is over than 1.02, MgO content is less than 11.95% or TiO₂ content is less than 12.57%. While the slag basicity can be influenced significantly with the slag basicity less than 1.02, MgO content over than 13.95% and TiO₂ content over 13.57%. The Al₂O₃ content of the slag should be less than 12.75%.

You might also be interested in these eBooks

Materials Processing and Manufacturing III

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 753-755)

Pages:

1857-1861

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.753-755.1857

Citation:

Cite this paper

Online since:

August 2013

Authors:

Shu Qing Zhang*, Xiu Ling Lv, Li Hong Zhang, Na Hui Zhang

Keywords:

Basicity, Chemical Composition, Minitab, Slag Viscosity

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] Xiayu HU, Liquan LIN, Liaosha LI. Laboratory Research on Property of Higher Al2O3 Content Slag[J]. China Metallurgy, 2006, 16(2)：36-41(in Chinese).

Google Scholar

[2] Hongwang MU, Shuhui ZHANG, Lü Qing, Yanqin SUN. Experimental Study on Viscosity of Blast Furnace Slag with Medium Titania and High Alumina Content under Neutral Atmosphere [J]. Iron & Steel, 2012, 47(6)：18-21, 50(in Chinese).

Google Scholar

[3] Hailiang WANG, Derong ZHU, Bin GUI, etc. MINITAB Soft Application in Quality Control of Process Control[J]. Coal Mine Machinery, 2006, 27(10)：114-116(in Chinese).

Google Scholar

[4] Zhanfei MU. Study on Improving Reduction Disintegration Index of the Low-temperature Sinter[D]. Shenyang: Northeastern University, 2008 (in Chinese).

Google Scholar

[5] Chi ZHANG. Minitab: Six Sigma solution [M]. Guangzhou: Guangdong Economic Publishing House, 2003(in Chinese).

Google Scholar