Research and Application of Weighing Low Temperature and Mobile Metering Device

Sheng Li Zhang; Yi Luo; Li Na Wang; Chun Yan Li; Hao Sun; Wei Xie; Wen Sheng Liu; Jin Xiu Wang

doi:10.4028/www.scientific.net/AMR.706-708.920

Paper Titles

PID Control Strategy of Vehicle Active Suspension Based on Considering Time-Delay and Stability
p.901

Progress in Lamb Wave Testing and Research Based on PZT
p.907

Remote Control Technology in Intelligent Oil-Well Based on Acoustic Wave
p.912

Remote Localization of Underwater Magnetic Target
p.916

Research and Application of Weighing Low Temperature and Mobile Metering Device
p.920

Research and Exploration of Carbon Dioxide Concentration Real-Time Monitoring System Based on Freescale MCU
p.924

Research of Large Excavator Multidimensional Intelligent Vibration Monitoring and Fault Diagnosis System
p.928

Research of the Control Method for the Uniformity of Insulation Layer on Communication Cable
p.932

Research of the Electronics Definite Direction Technology
p.937

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 706-708Research and Application of Weighing Low...

Research and Application of Weighing Low Temperature and Mobile Metering Device

Abstract:

The accuracy and stability of dynamometer diagram measurement are key assessment index for this technology. At present, separator measurement data is mostly taken as comparison benchmark for evaluation of dynamometer diagram measurement in Huabei Oilfield, resulting in large error in comparison. In view of existence of gas, water and pressure, gas/liquid separation of produced fluid is followed by separating measurement of gas and liquid. Gas and liquid mixture are measured by flow meter and weighing method, respectively. Higher precision measurement data is obtained. In combination with PLC programming control, this technology can realize fully automatic and continuous measurement. This device has been applied in 126 wells in Huabei Oilfield. Assisted by dynamometer diagram measurement software, point-to-point calibration and correction method of yield measurement is improved^[.