[1]
E. Pessard, P. Mognol, J. Y. Hascoet, C. Gerometta: Complex cast parts with rapid tooling: rapid manufacturing point of view, International Journal of Advanced Manufacturing Technology, Vol. 39 (2008), pp.898-904.
DOI: 10.1007/s00170-007-1281-8
Google Scholar
[2]
Z. Shan, Y. Yan, R. Zhang, Q. Lu, L. Guan: Rapid Manufacture of Metal Tooling by Rapid Prototyping, International Journal of Advanced Manufacturing Technology, Vol. 21(2003), pp.469-475.
DOI: 10.1007/s001700300055
Google Scholar
[3]
C. M. Cheah, C. K.Chua, C. W. Lee, C. Feng, K. Totong: Rapid prototyping and tooling techniques: a review applications for rapid investment casting, International Journal Advanced Manufacturing Technology, Vol. 25 (2005), p.308–320.
DOI: 10.1007/s00170-003-1840-6
Google Scholar
[4]
C.D. Naiju, M. Adithan, P. Radhakrishnan, Y. Upendra Sravan: Functional Testing of Direct Metal Laser Sintered (DMLS) Components for Automotive Application, Advanced Materials Research, Vols. 383-390 (2012), pp.6242-6246.
DOI: 10.4028/www.scientific.net/amr.383-390.6242
Google Scholar
[5]
A. Gaard, P. Krakhmalev,J. Bergstom: Microstructural characterisation and wear behaviour of (Fe,Ni) - Tic MMC prepared by DMLS, Journal of Alloys and Compounds, Vol. 421(2006), pp.166-171.
DOI: 10.1016/j.jallcom.2005.09.084
Google Scholar
[6]
C.D. Naiju, M. Adithan, P. Radhakrishnan: Effect of Processing Parameters and Microstructural defects on Fatigue Strength of Direct Metal Laser Sintered Parts, International Journal of Rapid Manufacturing, Vol. 2 (2011), No.3. pp.150-161.
DOI: 10.1504/ijrapidm.2011.043456
Google Scholar
[7]
E.H. Francis, E.A. Haider: Laser Sintered rapid tools with improved surface finish and strength using plating technology, Journal of Materials Processing Technology, Vol. 121 (2002), pp.318-322.
DOI: 10.1016/s0924-0136(01)01220-1
Google Scholar
[8]
C.D. Naiju, M. Adithan, P. Radhakrishnan: Evaluation of fatigue strength for the reliability of parts produced by direct metal laser sintering (DMLS), International Journal of Rapid Manufacturing. Vol.1/4 (2010), pp.377-389.
DOI: 10.1504/ijrapidm.2010.036112
Google Scholar
[9]
Yongzhong Zhang , Mingzhe Xi, Shiyou Gao, Likai Shi: Characterisation of laser deposited metallic parts, Journal of materials processing technology, Vol. 142 (2003), pp.582-585.
DOI: 10.1016/s0924-0136(03)00663-0
Google Scholar
[10]
J. R. Philip: Taguchi Techniques for Quality Engineering, Second Edition, Tata McGraw-Hill Publishing Company Limited (2005).
Google Scholar
[11]
ASTM G133: 05e1 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear.
DOI: 10.1520/g0133-02
Google Scholar