[1]
Qu Huachang.The Technology of Die Casting and Mold Design[M].Beijing: Higher Education Press. 2008.(In Chinese)
Google Scholar
[1]
Liu Hongjun, Li Yamin, Huang Naiyu. Rapidly (Gravity)Prototype Casting Technology Based on SLS Prototype [J]. Special Casting & Nonferrous Alloys, 2005, (7): 408~410.(In Chinese)
Google Scholar
[2]
Wang Xijian, Xu Ping, Gao Qi. Application and research emphasis of rapid prototyping technology[J]. Journal of Liaoning Technical University, 2005, (4): 221~223. (In Chinese)
Google Scholar
[3]
LAI Hua qing, LI Huai jun, XU Xiang. Rapid Prototyping Technology and Its Application in Manufacture of Mold and Pattern for Casting[J]. Research Studies On Foundry Equipment, 2001, (6): 42~44. (In Chinese)
Google Scholar
[4]
Zhu Linquan, Bai Peikang, Zhu JianMiao. Rapid Prototyping and Rapid Manufacturing Technology[M]. Beijing: National defence industry press,2003. (In Chinese)
Google Scholar
[5]
Zhao Yang pei. Technology and Application of Rapid Prototyping Manufacturing[J]. Journal of Xuzhou Institute of Architectural Technology, 2002, (2): 20~22. (In Chinese)
Google Scholar
[6]
Fan Zitian, Huang Naiyu, Chen Zongmeng. Quick Casting by Selective Laser Sintering (SLS) [J]. Special Casting & Nonferrous Alloys, 1999, (5): 7~9. (In Chinese)
Google Scholar
[7]
Pan Yanfeng, Shen Yifu, Gu Dongdong. Present Status of Development for Selective Laser Sintering(SLS) [J]. Tool Engineering, 2004, (6): 3~7. (In Chinese)
Google Scholar