Fabrication of Combined Type Insulation Wall in a Field Emission Display with Carbon Nanotube Emitters

Feng Ge Wang; Yu Kui Li

doi:10.4028/www.scientific.net/AMR.168-170.1086

Paper Titles

Laboratory Experimental Study on Pullout Behavior of Mortar Grouted GFRP Soil Nails
p.1069

Study on Effects of Admixture and Shrinkage Models on High-Performance Concrete
p.1073

A New Method to Prepare Carbon Fiber/Carbon Black Reinforced Concrete and its Properties
p.1077

Study on the Fabrication of Compound Cold Cathode Electrode in a Field Emission Display
p.1082

Fabrication of Combined Type Insulation Wall in a Field Emission Display with Carbon Nanotube Emitters
p.1086

Dynamic Response of High Steep Rock Slopes Based on Wenchuan Near-Field Seismic Motion Characteristics
p.1090

Multiphase Constitutive Model of " Matrix-Strengthen Particle of Saturated Soil "
p.1098

Fabrication and Mechanical Characterization of Carbon Nanotubes-Enhanced Epoxy
p.1102

Destruction Process Analysis of Laminated Ceramic Composites Based on APDL
p.1107

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 168-170Fabrication of Combined Type Insulation Wall in a...

Fabrication of Combined Type Insulation Wall in a Field Emission Display with Carbon Nanotube Emitters

Abstract:

Using insulation slurry as material, the combined type insulation wall was developed with the high-effective screen-printing process. Two parts were mainly included for the combined type insulation wall, which was the lower insulation wall prepared on the cathode panel and the upper insulation wall fabricated on the anode panel, respectively. The fabricated combined type insulation wall possessed better insulation performance, and was used to separate the cathode and anode panel. Using carbon nanotube as cathode material, the field emission display with the combined type insulation wall was fabricated, and the detailed manufacture process was also presented. The sealed field emission display showed high luminance brightness, stable emission current and good field emission properties.

You might also be interested in these eBooks

Advances in Building Materials, ICSBM 2011

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 168-170)

Pages:

1086-1089

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.168-170.1086

Citation:

Cite this paper

Online since:

December 2010

Authors:

Feng Ge Wang, Yu Kui Li

Keywords:

Emitter, Fabrication, Field Emission, Insulation

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Taehong Kim, Sangjik Kwon, Hyonhee Yoon, et al. Colloids and surface A: physicochemical and engineering aspects. Vol. 313-314 (2008), p.448.

Google Scholar

[2] Yukui Li, Cong Li. Key engineering materials. Vol. 428-429 (2010), p.436.

Google Scholar

[3] Young Chul Choi, Naesung Lee. Diamond and related materials. Vol. 17 (2008), p.270.

Google Scholar

[4] Fan-guang Zeng, Chang-chun Zhu, Weihua Liu, et al. Microelectronics journal. Vol. 37(2006), p.495.

Google Scholar

[5] S. Srividya, S. Gautam, P. Jha, et al. Applied surface science. Vol. 256(2010), p.3563.

Google Scholar

[6] D. banerjee, A. Jha, K. K. Chattopadhyay. Physica E: low-dimensional systems and nanostructures. Vol. 41(2009), p.1174.

Google Scholar

[7] Fang-Hsing Wang, Tzu-Ching Lin, Shien-Der Tzeng, et al. Applied surface science. Vol. 256 (2010), p.7600.

Google Scholar

[8] P. S. Guo, T. Chen, Y. W. Chen, et al. Solid-state electronics. Vol. 52 (2008), p.877.

Google Scholar

[9] Yukui Li, Changchun Zhu, Xinghui Liu. Diamond and related materials. Vol. 11(2002), p.1845.

Google Scholar