Influence of Sulphate on the Moisture Movement of Calcium Silicate Brick Masonry Wall

Article Preview

Abstract:

This paper presents the behaviour of moisture movement of calcium silicate brick masonry walls exposed to sodium sulphate environment. The walls were exposed to three sodium sulphate conditions with sulphate concentrations of5%, 10% and 15%. For comparison, some walls were also exposed to dry and wet condition which acts as a control conditions. All specimens were prepared and cured under polythene sheet for 14 days in a controlled environmental room and maintained at relative humidity and temperature of 80 ± 5% and 25 ± 2°C, respectively. After the curing period, the specimens were exposed to sodium sulphate as well as drying and water exposures, during which moisture movement was measured and monitored for a period of up to 7 months. As a result, the moisture expansion was observed and recorded for all masonry wall specimens after exposed to the sulphate condition.

You might also be interested in these eBooks

Info:

Periodical:

Advanced Materials Research (Volumes 133-134)

Pages:

201-204

Citation:

Online since:

October 2010

Export:

Price:

[1] Al Dulaijan, S U, Maslehuddin, M, Al Zahrani, M M, Sharif, A M, Shameem, M, and Ibrahim, M (2003).

Google Scholar

[2] Beard, R, Dinnie, A, and Richards, R (1969). Movement of brickwork: Experimental unrestrained walls of Fletton bricks., Trans. 68(73), 73-90.

Google Scholar

[3] Benavente, D, Linares-Fernandez, L, Cultrone, G, and Sebastian, E (2006). Influence of microstructure on the resistance to salt crystallization damage in brick., Journal of Materials and Structures, 39, 105-113.

DOI: 10.1617/s11527-005-9037-0

Google Scholar

[4] Binda, L, and Molina (1990). Building material durability: Semi Markov approach., Journal of Material in Civil Engineering, 2(4), 223-239.

DOI: 10.1061/(asce)0899-1561(1990)2:4(223)

Google Scholar

[5] DeVekey, R C (2008). Brickwork and blockwork., Construction Materials; Their Nature and Behaviour, Third edition, Spone Press, New York.

Google Scholar

[6] Rijiniers, L A, Pel, L, Huinink, H P, and Kopinga, K (2005). Salt crystallization as damage mechanism in porous building materials - A nuclear magnetic resonance study., Journal of Magnetic Resonance Imaging, 23, 273-276.

DOI: 10.1016/j.mri.2004.11.023

Google Scholar

[7] Veniele, F, Setti, M, Navarro, C R, Lodola, S, Palestra, W, and Busetto, A (2003). Thaumasite as decay product of cement mortar in brick masonry of a church Near Venice., Journal of Cement and Concrete Composite, 25, 1123-1129.

DOI: 10.1016/s0958-9465(03)00159-8

Google Scholar

[8] Zsembery, S (2001). Manual 2: The properties of clay masonry units., Clay Brick and Paver Institute (CBPI), Australia.

Google Scholar