Evaluation of Polished Surface for Viscoelastic Polymer

Takao Kubo; Shiro Ota; Masatoshi Oda; Kenichi Hashishita; Yasuhiro Kakinuma

doi:10.4028/www.scientific.net/AMR.126-128.493

Paper Titles

Lapping of Polycrystalline Diamond Compact (PDC)
p.469

Research on the With-In Wafer Non-Uniformity (WIWNU) of the Large Quadrate Optic in the Fast Polishing Process
p.475

Fabrication of Small Polishing Tool by Using Electrophoresis Phenomenon
p.481

Identification of Brittle-Ductile Material Removal Characteristics in Ultrasonic Aided Lapping of Engineering Ceramics
p.487

Evaluation of Polished Surface for Viscoelastic Polymer
p.493

Research on Axisymmetric Free-Form Creation with Rotating Polishing Tool
p.499

Simulation Study of Sliding Control for Constant Polishing Force Using an Innovative Sphere-Like Polishing Tool on a Machining Center
p.505

Chemical Effect on the Material Removal Rate in the CMP of Silicon Wafers
p.511

On the Technologies of Electrochemical Mechanical Finishing
p.515

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 126-128Evaluation of Polished Surface for Viscoelastic...

Evaluation of Polished Surface for Viscoelastic Polymer

Abstract:

Viscoelastic polymers are used as one of coating materials for protecting the products from scratches. Presently, the repair of the coating surface for removing dust or extraneous matters has been performed through several polishing processes. However, it becomes increasingly difficult to polish its surface by only applying good skill and experience of skilled worker because a leading-edge viscoelastic polymer for coating is further scratch-resistant. Thus, based on quantitative evaluation of relation between polishing process and finished surface, it is necessary to make the polishing process appropriate for the leading-edge viscoelastic polymers. In this study, we attempt to establish the evaluation method of the polished surface and clarify the surface condition with invisible scratches.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 126-128)

Pages:

493-498

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.126-128.493

Citation:

Cite this paper

Online since:

August 2010

Authors:

Takao Kubo, Shiro Ota, Masatoshi Oda, Kenichi Hashishita, Yasuhiro Kakinuma

Keywords:

Buffing, Polishing, Polishing Condition, Surface Evaluation, Viscoelastic Polymer

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] S.T. Choi, S.R. Lee, Y.Y. Earmme: Flat indentation of a viscoelastic polymer film on a rigid substrate, Acta Materialia, Vol. 56, Iss. 19 (2008) p.5377.

DOI: 10.1016/j.actamat.2008.07.030

Google Scholar

[2] Y. Kakinuma, N. Yasuda, T. Aoyama: Micromachining of Soft Polymer Material Applying Cryogenic Cooling, Journal of Advanced Mechanical Design, System, and Manufacturing, Vol. 2, No. 4 (2008) p.560.

DOI: 10.1299/jamdsm.2.560

Google Scholar

[3] X. Pessoles, C. Tournier: Automatic polishing process of plastic injection molds on a 5-axis milling center, Journal of Materials Processing Technology, Vol. 209, Iss. 7 (2009) p.3665.

DOI: 10.1016/j.jmatprotec.2008.08.034

Google Scholar

[4] M. Hotta, T. Iimura, T, Minamihaba: Effect of the surface dignity on the ultra-precision cutting environment, Research paper of Local Independent Administrative Agency Iwate Industrial Research Institute, No. 8 (2001) p.10 (in Japanese).

Google Scholar

[5] E.S. Gadelmawla, M.M. Koura, T.M.A. Maksoud, I.M. Elewa, H.H. Soliman: Roughness parameters, Journal of Materials Processing Technology, Vol. 123, Iss. 1 (2002) p.139.

DOI: 10.1016/s0924-0136(02)00060-2

Google Scholar