Numerical Simulation of Flow and Heat Transfer for Cooling Roller in Amorphous Spinning Process

Yong Kang Li; Yang Yang; Yan Ming Song; Fei Ran Zhang

doi:10.4028/www.scientific.net/AMR.1142.276

Paper Titles

Research on Process and Property of H13 Die Steel Directly Manufactured by Selective Laser Melting
p.254

The Influence of Cu/Ti Overlapping Region Microstructures on the Mechanical Tensile Properties of the Joint via Friction Stir Lap Welding
p.260

Machining of SiCp/Al Composites: Effect of Tool Corner Radius on Residual Stresses, Cutting Force and Temperature
p.265

Research on the Mechanical Performance and Crack Defects Assessment of X65 Marine Pipeline Welding Joint
p.271

Numerical Simulation of Flow and Heat Transfer for Cooling Roller in Amorphous Spinning Process
p.276

Preparation of Polyaniline/Cotton Composite for Cr (VI) Removal in Solution
p.285

Study on the Stabilization/Solidification of Lead-Contaminated Soil Using Alkali-Activated Cementing Materials with Rich-Silicon Materials
p.291

Stabilization of Cd in Ore Soil Using Modified Red Mud Materials
p.296

Mechanistic Insight into H₂S Adsorption and Dissociation on MoP(010): A Density Functional Investigation
p.300

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 1142Numerical Simulation of Flow and Heat Transfer for...

Numerical Simulation of Flow and Heat Transfer for Cooling Roller in Amorphous Spinning Process

Abstract:

Numerical simulation of cooling roller in planar flow melt spinning process was accomplished using CFD software, Get cooling water flow characteristics and the cooling roller wall temperature and pressure distribution with cooling roller rotation speed range 0-50r/s, The results show that: heat transfer coefficient h and Nusselt number between the cooling water and the inner wall surface of a copper roller creases with the increase of the cooling roller rotate speed, but the increase rate is relatively small; Effect of cooling roller rotate speed on inner wall pressure is large, cooling roller inner wall pressure increases with the rotation speed increase. This study provided a theoretical reference of amorphous cooling roller design and optimization.

You might also be interested in these eBooks

2016 International Conference on Advanced Material Research and Application

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 1142)

Pages:

276-281

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.1142.276

Citation:

Cite this paper

Online since:

January 2017

Authors:

Yong Kang Li, Yang Yang*, Yan Ming Song, Fei Ran Zhang

Keywords:

Amorphous, Cooling Roller, Flow, Heat Transfer, Numerical Simulation

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] He Shengjing, Gao Liru. Amorphous Material and Application [M]. Beijing: China Machine Press, (1987).

Google Scholar

[2] Yoshizawa Y, Yamauchi K (1989) Hitachi Metals Ltd, Tokyo EUPatent. No. 0299498.

Google Scholar

[3] Song Y M, Yang Y, Numerical simulation of adsorption characteristics of magnetic take- up roll for amorphous ribbon [J]. Journal ofBeijing University of Aeronautics and Astronautics, 2015, 41 (3): 472-478 (in Chinese).

Google Scholar

[4] Srinivas. M, Majumdar. B, Phanikumar. G, et al. Effect of Planar Flow Melt Spinning Parameters on Ribbon Formation in Soft Magnetic Fe68. 5Si18. 5B9Nb3Cu1 Alloy [J]. Metallurgical and Materials Transactions B. 2011, (42): 370-379.

DOI: 10.1007/s11663-011-9476-7

Google Scholar

[5] Bussnann M, Mostaghimi J, Kirk D W, et al. A Numerical Study of Steady Flow and Temperature Fields within A Melt Spinning Puddle [J]. International Journal of Heat & Mass Transfer. 2002, (45): 3997-4010.

DOI: 10.1016/s0017-9310(02)00112-6

Google Scholar

[6] Deng Hong wu, Tao Zhi, Xu Guoqiang, etl. Experimental Investigation on Heat Transfer within a Rotating Ribbed Serpentine Passage with Stagger Angles [J]. Journal of Dalian University of Technology , 2001, 41(1): 38-41.

Google Scholar

[7] Liu Feng, Zhang Jinyuan, Zhang Ke, etl. Journal of Xi'an Technological University [J], 2010, 30(1): 34-39.

Google Scholar

[8] Park C M, Kim W S, Park G J. Mechanics ResearchCommunications [J], 2003, 30: 297-302.

Google Scholar

[9] Pang Yunzhou, Shen Chuying, Pan Tingjian. Journal of Shanghai Iron and Steel Research [J], 1982, 3: 42-50.

Google Scholar

[10] LIU H, CHEN W, QIU S, et al. Numerical Simulation of Initial Development of Fluid Flow and Heat Transfer in Planar Flow Casting Process [J]. Metallurgical and Materials Transactions B, 2009, 40(3): 411-29.

DOI: 10.1007/s11663-009-9236-0

Google Scholar