[1]
K. Mori, S. Maki, Y. Tanaka, Warm and Hot Stamping of Ultra High Tensile Strength Steel Sheets Using Resistance Heating, Annals of CIRP 54 (2005) No. 1, 209-212.
DOI: 10.1016/s0007-8506(07)60085-7
Google Scholar
[2]
M. Pfestdorf, The Need for Multi-Phase Steel for the Body-inWhite of a Passenger Car, Steel Seminar, American Iron and Steel Institute, Washington DC, (2005).
Google Scholar
[3]
M. Engels, C. Müller, P. Groche, Potenziale mechanischer Oberflächeneinglättung im Werkzeug- und Formenbau, Conference Proceedings, 7. Forum Tribologische Entwicklungen in der Blechumformung, (2010).
Google Scholar
[4]
H. Hoffmann, C. Hwang, K. Ersoy, Advanced Wear Simulation in Sheet Metal Forming, Annals of the CIRP 54/1, CIRP, Paris, 2005, 217-220.
DOI: 10.1016/s0007-8506(07)60087-0
Google Scholar
[5]
D. Hortig, Werkzeugbeschichtungen mit Trockenschmierstoffeigenschaften, Dissertation, TU Darmstadt, Berichte aus der Produktion und Umformtechnik, Band 47, Shaker-Verlag, Aachen, (2001).
Google Scholar
[6]
B. Johannsson, Neue Werkzeuglösungen für die Automobilindustrie, 3. European Press Shop Meeting, Schopfheim, (2007).
Google Scholar
[7]
G. Schuh, F. Zwanzig, F.: Synchronisierung im Werkzeugbau, ZWF 5 (2009) 362–365.
DOI: 10.3139/104.110080
Google Scholar
[8]
K. Lange, Umformtechnik - Handbuch für Industrie und Wissenschaft, Bd. 3. Blechbearbeitung, Springer-Verlag, Berlin, (1990).
Google Scholar
[9]
M.P. Pereira, W. Yan, B.F. Rolfe, Sliding distance, contact pressure and wear in sheet metal stamping, Wear 268 (2010) 1275-1284.
DOI: 10.1016/j.wear.2010.01.020
Google Scholar
[10]
K. Ersoy-Nürnberg, G. Nürnberg, M. Golle, H. Hoffmann, Simulation of wear on sheet metal forming tools – An energy approach, Wear 265 (2008) 1801-1807.
DOI: 10.1016/j.wear.2008.04.039
Google Scholar
[11]
J. Hol, Multi-scale friction modeling for sheet metal forming, PhDThesis, University of Twente, The Netherlands, (2013).
Google Scholar
[12]
G. W. Stachowiak, A.W. Batchelor, Engineering Tribology, Third Edition, Elsevier Butterworth-Heinemann, (2005).
Google Scholar
[13]
H. Kim, S. Han, Q. Yan, T. Altan, Evaluation of tool materials, coatings and lubricants in forming galvanized advanced high strength steels (AHSS), Annals of CIRP 57 (2008) 299-304.
DOI: 10.1016/j.cirp.2008.03.029
Google Scholar
[14]
L.H. Chiu, C.F. Yang, W.C. Hsieh, A.S. Cheng, Effect of contact pressure on wear resistance pf AISI H13 tool steel with chromium nitride and hard chromium coatings, Surface and Coating Technology 154 (2002) 282-288.
DOI: 10.1016/s0257-8972(02)00011-7
Google Scholar
[15]
F. Klocke, W. König, Fertigungsverfahren Umformen, 5. neu bearbeitete Auflage, Springer-Verlag, Berlin, (2006).
Google Scholar
[16]
E. Ceron, N. Bay, A methodology for off-line evaluation of new environmentally friendly tribo-systems for sheet metal forming, Annals of CIRP 62 (2013) 231-234.
DOI: 10.1016/j.cirp.2013.03.062
Google Scholar
[17]
E. Ceron, New tribo-systems for sheet metal forming of advanced high strength steels and stainless steels, PhDThesis, Technical University of Denmark, (2013).
Google Scholar
[18]
P. Groche, M. Christiany, Evaluation of the potential of tool materials for the cold forming of advanced high strength steels, Wear 302 (2013) 1279-1285.
DOI: 10.1016/j.wear.2013.01.001
Google Scholar
[19]
P. Groche, M. Christiany, Qualifizierung neuer Tribosysteme zur Umformung höchstfester Stahlbleche, EFB-Forschungsbericht Nr. 363, Hannover, (2013).
Google Scholar