Thermal Analysis Application in Study of Alkali-Activated Blast Furnace Slag

Pavel Mec; Jana Boháčová; Martina Turicová

doi:10.4028/www.scientific.net/AMM.835.547

Paper Titles

Influence of Freezing-Thawing on Shear Strength of Frozen Soil in Northeast China
p.525

The Effect of Filler Based on Calcium Silicates оn Strength of Lime Composites
p.531

Study on Tensile Creep Characteristics of High Strength Concrete
p.535

Heat Capacity Measurements of Loose Materials with Respect to Long Heat Accumulation
p.542

Thermal Analysis Application in Study of Alkali-Activated Blast Furnace Slag
p.547

Analysis of the Settlement of Roadbed-Culvert Transitional Section in the High Salinity Regions
p.554

Analysis of the Culvert Foundation Settlement under Different Construction Methods in High Salinity Regions
p.559

Study on Continuum Damage Mechanics Model for High Cycle Fatigue
p.564

Distribution of Displacements in Elastic Layer
p.568

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 835Thermal Analysis Application in Study of...

Thermal Analysis Application in Study of Alkali-Activated Blast Furnace Slag

Abstract:

The most modern methods are used for study of alkali-activated material nowadays. Due to structure of these materials which is less structured most of these methods provide only limited information. Thermal analysis is partially applicable to alkali activated materials based on blast furnace slag. The article describes the application possibilities of thermal analysis to the study of thermal transformations of these materials and their applicability to the description of the tested structure.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 835)

Pages:

547-553

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.835.547

Citation:

Cite this paper

Online since:

May 2016

Authors:

Pavel Mec*, Jana Boháčová, Martina Turicová

Keywords:

Alkali-Activated, Blast Furnace Slag, Thermal Analysis

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] C. Shi, P.V. Krivenko and D. Roy, Alkali-activated cements and concretes, Taylor & Francis, Oxford, (2006).

DOI: 10.4324/9780203390672

Google Scholar

[2] F. Pacheco-Torgal, J. Castro-Gomes and S. Jalali, Alkali-activated binders: A review Part 1. Historical background, terminology, reaction mechanisms and hydration products, Construction and Building Materials, 22 (2008) 1305-1314.

DOI: 10.1016/j.conbuildmat.2007.10.015

Google Scholar

[3] D. Krizan and B. Zivanovic, Effects of dosage and modulus of water glass on early hydration of alkali-slag cements. Cement and Concrete Research, 32 (2002) 1181-1188.

DOI: 10.1016/s0008-8846(01)00717-7

Google Scholar

[4] V.S. Ramanachardran, M.R. Paroli, J.J. Beaudoin, and H.A. Delgado, Handbook of thermal analysis of construction materials, William Andrew, (2002).

Google Scholar

[5] S. Diamond, W.L. Dolch and L.L. White, Studies on Tobermorite-like calcium silicate hydrates, Purdue University, 1963, Indiana.

DOI: 10.5703/1288284313642

Google Scholar

[6] P. Yu, J. Kirkpatrick, B. Poe, P. MacMillan and Y. Cong, Structure of Calcium Silicate Hydrate (C-S-H): Near-, Mid-, and Far-Infrared Spectroscopy, J. Am. Ceram. Soc. 82 (1999) 742–748.

DOI: 10.1111/j.1151-2916.1999.tb01826.x

Google Scholar

[7] A.S. Vodní sklo, url: http: /www. vodnisklo. cz.

Google Scholar