[1]
S Suresh, A Mortensen, M Aksoy, A Needleman (1993). Fundamentals of Metal Matrix composites. Butterworth-Heinemann, Stoneham, MA.
Google Scholar
[2]
G Tosun, M Muratoglu (2004), The drilling of Al/SiCp metal matrix composites Part I: Microstructure. composite science and Technology 64: 299−308.
DOI: 10.1016/s0266-3538(03)00290-2
Google Scholar
[3]
M Ramulu, PN Rao, H Kao, (2002) Drilling of (Al2 O3) p/6061 Metal Matrix composites. J Master process Techno/ 37: 373-389.
Google Scholar
[4]
Harish K. Garg, Ketan Verma, Alakesh Manna, Rajesh Kumar Hybrid Metal Matrix International Journal of latest research Science and Technology Vol1, Issue : 36-44, May-June(2012).
Google Scholar
[5]
L. Krishnamurthy, B.K. I Sridhara, D. Abdul Budan.; "Comparative study on the machinablity aspects of aluminium silicon carbide and aluminum-graphite-silicon carbide. hybrid composites International Journal of Machining and Machinability of Materials 2011 - Vol. 10. No. 1/2 pp.137-152.
DOI: 10.1504/ijmmm.2011.040858
Google Scholar
[6]
S Basavarajappa, Tool Wear in Turning of Graphite Hybrid Metal Matrix Composites, Materials and Manufacturing Process (2009) 24: 484−487.
DOI: 10.1080/10426910802714431
Google Scholar
[7]
S Basavarajappa, G Chandramohan, M Prabhu, K Mukund, M Aswin, Drilling Of Hybrid Metal Matrix Composites-Workpiece , Surface integrity Int.J. Mach. Manufact 47(1) (2007): 92−96.
DOI: 10.1016/j.ijmachtools.2006.02.008
Google Scholar
[8]
K Palanikumar, R Karthikeyan, Assessment of Factors Influencing Surface roughness on machining ofAl/SiC Particulate composites [J]. Material Design, 2007, 28: 1584−1591.
DOI: 10.1016/j.matdes.2006.02.010
Google Scholar
[9]
A.A. N Abdel-Azim,Y. Shash, S.F. Mostafa, A. Younan, Casting of 2024-A1 alloy reinforced with A12O3 particles Journal of Materials Processing Technology 1995 55, 199-205.
DOI: 10.1016/0924-0136(95)01954-5
Google Scholar
[10]
A Baradeswaran, A Elaya Perumal, Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid Composites journal of composites PART B56(2014)464-471.
DOI: 10.1016/j.compositesb.2013.08.013
Google Scholar
[11]
Dunia Abdul Saheb, Aluminium silicon carbide and aluminium graphite particulate composites ARPN Journal of Engineering and Applied Science Vol . 6 No. 10 (2011).
Google Scholar
[12]
Slobodan Mitrovic, Miroslav Babic, Blaza Stojanovic, Nenad Miloradovic, Tribological Potential of Hybrid Composites Based on Zinc and Aluminium Alloys Reinforced with Sic and Graphite Particles Seribian Tribology Society, (2011).
Google Scholar
[13]
A Manna, B Bhattacharyya: A study on machinability of AlSiC-MMC Journal of material processing Technology Vol. 140, (2003) pp.711-716.
Google Scholar
[14]
T Rajmohan, K Palanikumar. Modeling and analysis of performance in drilling hybrid composites[ J]. The International Journal of Advanced Manufacturing Technology, 2012, DOI: 10. 1007/s00170-012-4083-6.
Google Scholar
[15]
T Rajmohan, K Palanikumar Experimental investigation and optimization in drilling hybrid aluminium metal matrix composites[J] Transactions of Nonferrous Metals Society of China, 2012, 22: 1286−1298.
DOI: 10.1016/s1003-6326(11)61317-4
Google Scholar
[16]
T Rajmohan, K Palanikumar, S. Ranganathan Evaluation of Mechanical and Wear properties of Hybrid Aluminium Composites [J] Transactions of Nonferrous Metals Society of China, 2013, 23: 2509−2517.
DOI: 10.1016/s1003-6326(13)62762-4
Google Scholar
[17]
S Suresha, B K Sridhara , Wear Characteristics of Hybrid Aluminium matrix composites reinforced with Graphite and Silicon Carbide particulates [J] Composites Science and Technology, 2010, 70: 1652−1659.
DOI: 10.1016/j.compscitech.2010.06.013
Google Scholar
[18]
S Suresha, B K Sridhara, Friction Characteristics of Aluminium silicon carbide hybrid composites [J] Materials and Design 2012, 34: 576−583.
DOI: 10.1016/j.matdes.2011.05.010
Google Scholar
[19]
S Suresha, B K Sridhara, Effect of silicon carbide particulates on wear resistance of graphite aluminium matrix composites [J] Materials and Design 2010, 31: 4470−4477.
DOI: 10.1016/j.matdes.2010.04.053
Google Scholar
[20]
S Basavarajappa, G Chandramohan , J Paulo Davim, Some studies on drilling of hybrid composites based on Taguchi techniques[J] Materials Proceesisng Technology 2008, 196: 332−338.
DOI: 10.1016/j.jmatprotec.2007.05.043
Google Scholar