Hugoniot-Measurement Experiments of the Heated Samples

Keiichi Oka; Kenichi Ogata; Tsutomo Mashimo

doi:10.4028/www.scientific.net/AMM.566.525

Paper Titles

FEM Analysis of Cylindrical Structural Elements under Local Shock Loading
p.499

Simulations of High Velocity Impacts of Ice on Carbon/Epoxy Composite Laminates
p.505

Numerical Study of the Effects of Metallic Plates in the Attenuation of the HRAM Phenomenon
p.511

A FEM Study on Adiabatic Shear Band Formation in Tube Compression Driven by Electro-Magnetic Loading
p.517

Hugoniot-Measurement Experiments of the Heated Samples
p.525

Development of an Output-Bar Supporting Stand to Suppress Transverse Vibration in Dynamic Tensile Test of Sheet Steel
p.530

The Development of Micro Ball Supersonic Impact Test System
p.536

Investigation of High-Speed Loading Effects on the Properties of Ferromagnetic Alloys Processed in an External Magnetic Field
p.542

A Study on Reduction of Friction in Impact Compressive Test Based on the Split Hopkinson Pressure Bar Method by Using a Hollow Specimen
p.548

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 566Hugoniot-Measurement Experiments of the Heated...

Hugoniot-Measurement Experiments of the Heated Samples

Abstract:

Pressure calibration in static compression experiments have been undertaken on the basis of the equation of state (EOS) derived from the Hugoniot data of the pressure scale materials such as Au, Pt and MgO. However, room-temperature isothermal compression curve and further high temperature compression curve have been derived by using the assumed Grüneisen parameters, which cause the larger error at the higher temperature. If the Hugoniot data of the heated sample are measured, the accurate high-temperature EOS can be obtained, and the Grüneisen parameter (γ) can be directly discussed. We have measured Hugoniot data of Cu, W, Au, etc. by using the high-time resolution streak camera system equipped with a powder gun and two-stage light gas gun. In this study, the Hugoniot-measurement technique of the elevated temperature sample using high-frequency heating apparatus was established equipped with a powder gun. We succeeded in the measurement of the Hugoniot data (shock-velocity and particle-velocity) of the heated sample at 800°C on W.

You might also be interested in these eBooks

Proceedings of the 8-th International Symposium on Impact Engineering

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 566)

Pages:

525-529

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.566.525

Citation:

Cite this paper

Online since:

June 2014

Authors:

Keiichi Oka*, Kenichi Ogata, Tsutomo Mashimo

Keywords:

Equation of State, Pressure Scale, Shock Compression

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] J. C. Jamieson, J. N. Fritz, and M. H. Manghnani in : High-Pressure Research in Geopyys, edited by S. Akimoto, and M.H. Manghnani, Center for Academic Publication, Tokyo, (1982) p.27.

Google Scholar

[2] D. L. Heins and R. Jeanloz: J. Appl. Phys. Vol. 55 (1984), p.885.

Google Scholar

[3] O.L. Anderson, D. G. Isaak, S. Yamamoto: J. Appl. Phys. Vol. 65 (1989), p.1534.

Google Scholar

[4] N. C. Holmes, J. A. Moriarty, G. R. Gathers, and W. J. Nellis: J. Appl. Phys. Vol. 66 (1989), p.2962.

Google Scholar

[5] H. K. Mao and P. M. Bell: J. Geophys. Res. Vol. 10 (1979), p.4533.

Google Scholar

[6] S. P. Marsh: LASL Shock Hugoniot Data, University of California Press, 57-146 (1980).

Google Scholar

[7] G. I. Kanel, S. V. Razorenov, V. E. Fortov: Shock-wave phenomena and the properties of condensed matter, Chapter 3, 83 (2004).

DOI: 10.1007/978-1-4757-4282-4

Google Scholar

[8] E.B. Zareysky: J. Appl. Phys. Vol. 106 (2009), p.023510.

Google Scholar

[9] T. Mashimo, Y. Zhang, M. Uchino, and A. Nakamura: Jpn. J. Appl. Phys, Vol. 48 (2009), p.096506.

Google Scholar