Research on Curvature Mode Characteristics of Damaged Simply Supported Beam

Xin Shang; Yue Xu; Geng Feng Ren

doi:10.4028/www.scientific.net/AMM.455.261

Paper Titles

Effect of Acceleration Pulse Shape on Damage of the Specimen under Hopkinson High-g Loading
p.236

Numberical Simulation of Labyrinth Screw Pump with Separated Structure by Fluent
p.242

Dynamic Characteristics Analysis of the Mud Transfer Pump Rotor
p.248

The Sensitivity of the Focused Ultrasonic Method Used in Inclusion Testing of the Thick Steel Specimen
p.253

Research on Curvature Mode Characteristics of Damaged Simply Supported Beam
p.261

The Non-Probabilistic Reliability Analysis of Stayed-Cable Based on the Interval Algorithm
p.267

Dynamic Adjusting Mechanism of Counterbalance in Beam-Pumping Unit and its Kinetic Analysis
p.274

Impact Deformation Model of Thin-Walled Shell Filled with Explosive under High Axial Shock Overload
p.279

Study on Working Performances and Factor Combinations of ASU
p.286

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 455Research on Curvature Mode Characteristics of...

Research on Curvature Mode Characteristics of Damaged Simply Supported Beam

Abstract:

This paper approaches the rules of curvature mode and curvature mode difference about a simply supported beam. On the basis of the theory of curvature mode, through numerical simulation analysis of simply supported beam on four conditions, the result of simply supported beam with curvature mode and curvature mode difference were obtained. The results show that for the damaged beam information with numerical simulation, the curvature mode and curvature mode difference index calculated by difference method at the unit length unevenly is with strong noise, which can even submerge the beam damage information, and for different damage index of the beam, damage information from curvature mode difference curve is stronger and effected by unit length weaker than those from curvature mode curve, and damage information from curvature mode curve and curvature mode difference curve decrease with the increasing mode order.

You might also be interested in these eBooks

Mechanical Materials and Manufacturing Engineering III

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 455)

Pages:

261-266

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.455.261

Citation:

Cite this paper

Online since:

November 2013

Authors:

Xin Shang*, Yue Xu, Geng Feng Ren

Keywords:

Bridge Engineering, Curvature Mode, Curvature Mode Difference, Simply Supported Beam

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] S. K. Di: Experimental analysis of modal curvature diff. of damaged simply-supported beam. Journal of Lanzhou University of Technology, Vol. 36(2010), p.102.

Google Scholar

[2] Hillary B. and Ewins D. J.: The use of strain gages in force determinations and frequency response functions. 3rd IMAC (1985), p.612.

Google Scholar

[3] X. D. Sun, and J. P. Ou: Assessment of vibration-based damage indexes in structural health monitoring. Journal of Vibration and Shock, Vol. 28(2009), p.102.

Google Scholar

[4] S. N. Huang: Studies on the Damage Identification of Reinforced Concrete Girder Bridges. Ph.D. Thesis, Tsinghua University, China(2008).

Google Scholar

[5] W. F. Liu: Investigation on Dynamic Parameter and Damage Identification of Bridges. Ph.D. Thesis, Institute of Mechanics, Chinese Academy of Sciences, China(2003).

Google Scholar

[6] J. Chang, and Y. H. Ren: Bridge damage location identification by improved curvature mode. Journal of Earthquake Engineering and Engineering Vibration, Vol. 30(2010), p.121.

Google Scholar