Elastic-Plastic Equilibrium of a Hollow Cylinder from Inhomogeneous Perfectly Plastic Material

Vladimir I. Andreev

doi:10.4028/www.scientific.net/AMM.405-408.3182

Paper Titles

Wavelet-Based Multilevel Discrete-Continual Finite Element Method for Local Deep Beam Analysis
p.3165

Parallelization Development Method and Realization for a FEM Simulation Program
p.3169

Moving Grid Method for Simulating Crack Propagation
p.3173

Comparison of Instantaneous Power from Variable Shock Loads in Time Based on the Dissipation Model
p.3178

Elastic-Plastic Equilibrium of a Hollow Cylinder from Inhomogeneous Perfectly Plastic Material
p.3182

Numerical Analysis of the Influence of Bolt Pretension on Rigid Flange Joint Rigidity in Substation Steel Structures
p.3186

Numerical Analysis of the Influence of Bolt Pretension on Flexible Flange Joint Rigidity in Substation Steel Structures
p.3192

Advances of Research on Mode Localization in Mistuned Cyclically Periodic Structures
p.3198

Single Vortex Simulation around a Square Cylinder
p.3204

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 405-408Elastic-Plastic Equilibrium of a Hollow Cylinder...

Elastic-Plastic Equilibrium of a Hollow Cylinder from Inhomogeneous Perfectly Plastic Material

Abstract:

The paper presents the solution of elastic-plastic problem of the equilibrium of a thick-walled cylindrical shell under the influence of internal and external pressures. We consider a perfectly plastic material, elastic modulus and yield strength which are continuous functions of the radius. It is shown that plastic deformations may occur on both the inner surface of the shell and the inside of its wall. Defined stresses and strains in the elastic and plastic zones, as well the displacements in the shell until fracture.

You might also be interested in these eBooks

Progress in Industrial and Civil Engineering II

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 405-408)

Pages:

3182-3185

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.405-408.3182

Citation:

Cite this paper

Online since:

September 2013

Authors:

Vladimir I. Andreev

Keywords:

Elastic-Plastic Problem, Hollow Cylinder, Inhomogeneity, Perfect Plasticity

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Olszak W., Urbanowski W., Rychlewski J. Sprężysto-plastyczny gruboscienny walec niejednorodny pod działaniem parcia wewnetrznego i siły podłużnej /Arch. mech. stos. 1955. t. VII. № 3, s. 315 - 336.

Google Scholar

[2] Andreev V.I. About one Way of Optimization of thick-walled Shells. Applied Mechanics and Materials, Vols. 166-169 (2012) pp.354-358.

DOI: 10.4028/www.scientific.net/amm.166-169.354

Google Scholar

[3] Andreev V.I., Avershyev A.S. Stationary Problem of Moisture-elasticity for Inhomogeneous thick-walled Shells. / Advanced Materials Research, Vols. 671-674 (2013) рр. 571-575.

DOI: 10.4028/www.scientific.net/amr.671-674.571

Google Scholar

[4] Akimov P.A. Correct Indirect Discrete-Continual Boundary Element Method of Structural Analysis. / Advanced Materials Research Vols. 671-674 (2013), pp.1614-1618.

DOI: 10.4028/www.scientific.net/amr.671-674.1614

Google Scholar

[5] Akimov P.A. Correct Discrete-Continual Finite Element Method of Structural Analysis Based on Precise Analytical Solutions of Resulting Multipoint Boundary Problems for Systems of Ordinary Differential Equations. / Applied Mechanics and Materials Vols. 204-208 (2012).

DOI: 10.4028/www.scientific.net/amm.204-208.4502

Google Scholar