Design and Analysis of Hydraulic System of Balancing Device on Top Drive

Hong Wei Wang; Qing Yan Wang; Ping Yu; Chun Peng Zhang; Peng Zhang

doi:10.4028/www.scientific.net/AMM.401-403.469

Paper Titles

Thermal Analysis of Li-ion Battery
p.450

The Development of Triaxial Seepage Equipment for Negative Pressure at Exit
p.456

Analysis of Friction Effect on Dynamic Characteristics of Artificial Feel System
p.460

Design of LED Light Source for Uniform Illumination in Large Area
p.465

Design and Analysis of Hydraulic System of Balancing Device on Top Drive
p.469

Mass and Stiffness Modifications with Unmodified Eigenstructure Preserving
p.475

Parallel Resonant Power Supply Based on Chip UC3863
p.479

Pre-Processing Techniques of Information Extraction of a Dielectric Sandwich Radome
p.483

Redesign and Optimization of Structure Using Special Shaped Connection
p.487

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 401-403Design and Analysis of Hydraulic System of...

Design and Analysis of Hydraulic System of Balancing Device on Top Drive

Abstract:

The balancing device is the core component of top drive. Its role is to balance the gravity of top drive to prevent damage to the threaded joint in course of making up and breaking out of threaded joint of drill pipe. At the same time it can help male thread pop up from the drill pipe box in course of breaking out of threaded joint of drill pipe. Aiming at the problems of hydraulic system of the current balancing device that thread endures big normal force in course of making up and breaking out of threaded joint of drill pipe, a new hydraulic system was designed in this paper, and the simulation was analyzed based on AMESim. Through the simulation analysis, the new hydraulic system is reasonable and the normal force that screw endures is very small, which can reduce wear significantly.

You might also be interested in these eBooks

Frontiers of Manufacturing Science and Measuring Technology III

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 401-403)

Pages:

469-474

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.401-403.469

Citation:

Cite this paper

Online since:

September 2013

Authors:

Hong Wei Wang, Qing Yan Wang, Ping Yu, Chun Peng Zhang, Peng Zhang

Keywords:

Balancing Device, Hydraulic System, Simulation Analysis, Threaded Joint, Top Drive

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Z.Y. LI: Hydraulic Components and System, Mechanical Engineering Press, Beijing, chapter 9 (2011), pp.101-145.

Google Scholar

[2] Y.L. FU and X.Y. QI: Reference Manual of System Modeling and Simulation of LMS Imagine. Lab AMESim, Beihang University Press, Beijing, chapter 2 (2009), pp.3-36.

Google Scholar

[3] J.X. QI: Petroleum Machinery Vol. 37(2009), pp.106-107.

Google Scholar

[4] Y.H. SUN and J. XUE: The Design of Hydraulic Drilling Rig, Geological Publishing House, Beijing, chapter 4 (2011), pp.88-89.

Google Scholar