Plasma Impedance Tuning Effect on Nanostructure of Diamond Films

Article Preview

Abstract:

The morphology and structure of nanocrystalline diamond films as well as the plasma chemistry were studied by altering the plasma impedance. These impedances related to electron density were altered via the matching system. Two films were grown by the microwave plasma under different values of the plasma impedance, resulting in low and high electron densities in the plasma. By the use of measurements of plasma impedance and optical emission, the lowering of an inductive component of the impedance, indicating an increasing electron density, encouraged H-radical concentration present in the plasma. As the plasma was changed to the high electron density, Raman spectra of the films showed the sp3 Raman peak shifted from 1325 to 1328.5 cm-1 with narrower broadening. This behavior arose from an increase in grain size, corresponding to images from a field emission scanning electron microscope. Raman spectra of G-peak position and white light reflectometry showed a reduction in sp2 carbon content of the film. The G-peak shifted from 1564 to 1541 cm-1 and refractive index increased from 1.84 to 2.16. The formation of the films related to the concentrations of H and CH3 radicals. The plasma impedance affected the radical concentrations.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

32-37

Citation:

Online since:

September 2013

Export:

Price:

[1] S. Jou, B.R. Huang and M.C. Wu: Thin Solid Films Vol. 518 (2010), p.4458.

Google Scholar

[2] S. Mitura, K. Mitura, P. Niedzielski, P. Louda and V. Danilenk: Journal of Achievements in Materials and Manufacturing Engineering Vol. 16 (2006), p.9.

Google Scholar

[3] G. Wang, Q. Zhang, S.F. Yoon, J. Ahn, Q. Wang, D.J. Yang, Q. Zhou and N.L. Yue: Opt. Mater. Vol. 24(2003), p.509.

Google Scholar

[4] P.K. Bachmann and W. Enckevort: Diamond Relat. Mater. Vol. 1(1992), p.1021.

Google Scholar

[5] S.T. Khlayboonme, W. Techitdheera and W. Thowladda: Adv. Mater. Res. Vol. 651 (2013), p.148.

Google Scholar

[6] S.T. Khlayboonme and W. Thowladda: Appl. Mech. Mater. Vol. 339 (2013) p.657.

Google Scholar

[7] A. Müller, M. Emme, D. Korzec and J. Engemann: Surf. Coat. Technol. Vol. 116-119 (1999), p.674.

Google Scholar

[8] J. G. Buijnsters, L. Vázquez, G. W. G. Dreumel, J. J. Meulen, W. J. P. Enckevort and J. P. Celis: J. Appl. Phys. Vol. 108 (2010), 103514.

Google Scholar

[9] P.W. May, N.L. Allan, M.N.R. Ashfold, J.C. Richley, Yu.A. Mankelevich: Diamond Relat. Mater. Vol. 19 (2010), p.389.

Google Scholar

[10] F. Klauser, D.S. Nethl, R. Kaindl, E. Bertel and N. Memmel: Chem. Vap. Deposition Vol. 16 (2010), p.127.

DOI: 10.1002/cvde.200906827

Google Scholar

[11] K. W. Sun, J. Y. Wang and T. Y. Ko: Appl. Phys. Lett 92 153115 (2008).

Google Scholar

[12] S.C. Ramos, A.F. Azevedo, M.R. Baldan and N.G. Ferreira: J. Vac. Sci. Technol. A Vol. 28 (2010), p.21.

Google Scholar

[13] D.G. Goodwin: J. Appl. Phys. Vol. 74, (1993), p.6888.

Google Scholar

[14] M. Ikeda, H. Ito, M. Hiramatsu, M. Hori and T. Goto: J. Appl. Phys. Vol. 82 (1997), p.4055.

Google Scholar

[15] M. Mao and A. Bogaerts: J. Phys. D: Appl. Phys. Vol. 43 (2010), 205201.

Google Scholar