Research on Bond Behavior of Corroded Reinforcing Bar in Concrete Wrapped with Carbon Fiber Reinforced Polymer Sheets

Jian Hui Li; Chun Xia Miao

doi:10.4028/www.scientific.net/AMM.357-360.1348

Paper Titles

Effects of Two Polypropylene Fibers on the Properties of High Strength Concrete
p.1328

Effects of Expansive Agent and Steel Fiber on the Properties of the Fly Ash Ceramsite Lightweight Aggregate Concrete
p.1332

Experimental Study on High Strength Composite Ceramsite Using Fly Ash and Waste Glass
p.1337

The Relationships of Void Rate and Pavement Performances of Open Grade Friction Course with Analysis of Engineering Materials
p.1343

Research on Bond Behavior of Corroded Reinforcing Bar in Concrete Wrapped with Carbon Fiber Reinforced Polymer Sheets
p.1348

Preparation and Research of High-Temperature Foam Ceramic
p.1353

Preparation and Characterization of Polycarboxylate Superplasticizer Synthesized at Non-Aqueous Condition
p.1358

Quantitative Analysis of Cement-Based Materials and Sulfate Attack Products by XRD-Rietveld Analysis
p.1362

Improved Mechanical Property of Foam Glass Composites Toughened by Mullite Fiber
p.1370

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 357-360Research on Bond Behavior of Corroded Reinforcing...

Research on Bond Behavior of Corroded Reinforcing Bar in Concrete Wrapped with Carbon Fiber Reinforced Polymer Sheets

Abstract:

Right evaluation of the bond behavior between corroded reinforcing bar and concrete wrapped with fiber reinforced polymers (FRPs) is a chief problem to confirm the effect of FRP confinement. the pullout tests on 96 test specimens were conducted to study the effect of Carbon FRP (CFRP) confinement on the bond behavior between corroded reinforcing bar and concrete, test variables included reinforcing bar types, concrete covers, degrees of corrosion and CFRP confinements. The test results show that CFRP confinements can make the failure mode of deformed reinforcing bar specimens change from concrete splitting to bar pullout. When the degree of corrosion is less than 5%, the ultimate bond strength of corroded specimens increases by 5%~7%; and the CFRP confinement has less contribution on the ultimate bond strength, but it is effective on slowing down the bond stress descending speed and maintaining the bond strength. When the degree of corrosion is higher than 5%, the ultimate bond strength of corroded specimens drops gradually with the increase of degree of corrosion.

You might also be interested in these eBooks

Architecture, Building Materials and Engineering Management

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 357-360)

Pages:

1348-1352

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.357-360.1348

Citation:

Cite this paper

Online since:

August 2013

Authors:

Jian Hui Li*, Chun Xia Miao

Keywords:

Bond Behavior, Carbon Fiber Reinforced Polymer/Plastic (CFRP), Corrosion, Reinfocing Bar

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] SOBHY M, SOUDKI A, TOPPER T. Journal of Composites for Construction，Vol. 5 (2001), p.228.

Google Scholar

[2] NEALE K W, DEMERS M, LABOSSIERE P. International Journal of Materials and Product Technology, Vol. 23 (2005), p.348.

Google Scholar

[3] SAADATMANESH H, EHSANI M R, JIN L. ACI Structural Journal, 1996, 93(6): 639-647. Vol. 5 (2001), p.228.

Google Scholar

[4] SOUDKI K, SHERWOOD T. Journal of Materials in Civil Engineering, Vol. 15 (2003), p.358.

Google Scholar

[5] ZHANG W P, CUI W, GU X L. Journal of Building Structures, Vol. 30 (2009), p.162.

Google Scholar

[6] SANGEETA G, MUKHERJEE A, MALHOTRA S N. Construction and Building Materials, Vol. 23 (2009), p.153.

Google Scholar

[7] GB50152-92. Standard for test methods of concrete structures. (China Architecture and Building Press, Beijing 1992). (in Chinese).

Google Scholar

[8] ZHAO Y X, JIN W L. Journal of Zhejiang University: Engineering Science, Vol. 36 (2002), p.352. (in Chinese).

Google Scholar

[9] ALMUSALLAM A A, Al-GAHTANI A S, AZIZ A R. Construction and Building Materials, Vol. 10 (1996), p.123.

Google Scholar

[10] CHEN L G, FANG C Q, KOU X J. Industrial Construction, Vol. 34(2004), p.15. (in Chinese).

Google Scholar