[1]
Yuan, J., et al., Review on the progress of ultra-precision machining technologies. Frontiers of Mechanical Engineering, 2017. 12(2): pp.158-180.
Google Scholar
[2]
Taniguchi, N., Current status in, and future trends of, ultraprecision machining and ultrafine materials processing. CIRP annals, 1983. 32(2): pp.573-582.
DOI: 10.1016/s0007-8506(07)60185-1
Google Scholar
[3]
Yuan, Z. and X. Wang, The Technology of Precision Machining and Ultra-Precision Machining. 2007, Beijing: China Ma-chine Press.
Google Scholar
[4]
Hamade, R. and F. Ismail, A case for aggressive drilling of aluminum. Journal of materials processing technology, 2005. 166(1): pp.86-97.
DOI: 10.1016/j.jmatprotec.2004.07.099
Google Scholar
[5]
Budd, G., Resources and production of aluminium. European Aluminium Association, Birmingham, (1999).
Google Scholar
[6]
Santos, M.C., et al., Machining of aluminum alloys: a review. The International Journal of Advanced Manufacturing Technology, 2016. 86(9): pp.3067-3080.
Google Scholar
[7]
Zhang, J.-H., Theory and technique of precision cutting. 1991: Pergamon Press.
Google Scholar
[8]
Santos, M.C., et al., Machining of aluminum alloys: a review. The International Journal of Advanced Manufacturing Technology, 2016. 86(9-12): pp.3067-3080.
Google Scholar
[9]
Shalaby, M., et al., An investigation into the behavior of the cutting forces in precision turning. The International Journal of Advanced Manufacturing Technology, 2017. 90(5): pp.1605-1615.
Google Scholar
[10]
Júnior, M.G., et al., Analysis of the tool nose radius influence in the machining of a green ceramic material. The International Journal of Advanced Manufacturing Technology, 2019. 105(7-8): pp.3117-3125.
DOI: 10.1007/s00170-019-04430-6
Google Scholar
[11]
Lin, K., et al., Effect of tool nose radius and tool wear on residual stresses distribution while turning in situ TiB 2/7050 Al metal matrix composites. The International Journal of Advanced Manufacturing Technology, 2019. 100(1-4): pp.143-151.
DOI: 10.1007/s00170-018-2742-y
Google Scholar
[12]
Hua, Y. and Z. Liu, Effects of cutting parameters and tool nose radius on surface roughness and work hardening during dry turning Inconel 718. The International Journal of Advanced Manufacturing Technology, 2018. 96(5-8): pp.2421-2430.
DOI: 10.1007/s00170-018-1721-7
Google Scholar
[13]
Huang, Y. and S.Y. Liang, Force modelling in shallow cuts with large negative rake angle and large nose radius tools—application to hard turning. The International Journal of Advanced Manufacturing Technology, 2003. 22(9-10): pp.626-632.
DOI: 10.1007/s00170-003-1550-0
Google Scholar
[14]
Ali, M.H. and M. Ansari, The Effect of Nose Radius on Cutting Force and Temperature during Machining Titanium Alloy (Ti-6Al-4V). International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 2014. 8(12): pp.2124-2127.
Google Scholar
[15]
Dogra, M., V. Sharma, and J. Dureja, Effect of tool geometry variation on finish turning-A Review. Journal of Engineering Science & Technology Review, 2011. 4(1).
Google Scholar
[16]
Zhang, S., et al., A review of surface roughness generation in ultra-precision machining. International Journal of Machine Tools and Manufacture, 2015. 91: pp.76-95.
DOI: 10.1016/j.ijmachtools.2015.02.001
Google Scholar
[17]
Lucca, D., R. Rhorer, and R. Komanduri, Energy dissipation in the ultraprecision machining of copper. CIRP annals, 1991. 40(1): pp.69-72.
DOI: 10.1016/s0007-8506(07)61936-2
Google Scholar
[18]
Lucca, D.A., Y. Seo, and R. Komanduri, Effect of tool edge geometry on energy dissipation in ultraprecision machining. CIRP annals, 1993. 42(1): pp.83-86.
DOI: 10.1016/s0007-8506(07)62397-x
Google Scholar
[19]
Evans, C. and J. Bryan, Cryogenic diamond turning of stainless steel. CIRP annals, 1991. 40(1): pp.571-575.
DOI: 10.1016/s0007-8506(07)62056-3
Google Scholar
[20]
Casstevens, J.M., Diamond turning of steel in a carbon-saturated atmosphere. NASA STI/Recon Technical Report N, 1982. 83.
Google Scholar
[21]
Mkoko, Z. and K. Abou-El-Hossein. Effects of Machining Parameters on Surface Roughness when Ultra-High Precision Diamond Turning RSA443 Optical Aluminum. in Solid State Phenomena. 2019. Trans Tech Publ.
DOI: 10.4028/www.scientific.net/ssp.287.30
Google Scholar
[22]
Otieno, T., et al. Surface roughness when diamond turning RSA 905 optical aluminium. in Optical Manufacturing and Testing XI. 2015. International Society for Optics and Photonics.
DOI: 10.1117/12.2185470
Google Scholar
