Resistance and stability of steel channel section beams
Radosław Szczerba
Department of Building Structures; Faculty of Civil and Environmental Engineering; Rzeszów University of Technology (Poland)
Abstract
Analysis of the resistance and stability of steel beam of channel section loaded in the plane parallel to beam web, which does not pass through shear center, is presented in the paper. The consequence of this is the creation of a torsional moment that generates normal stresses due to bimoment and shear stresses as a result of St. Venant and warping torsion. In the paper, the contribution of those stresses to the global state of stress of simply supported beam is presented. Calculations were made according to Eurocodes and to the Polish Standard PN-90/B-3200. The elastic critical moment for lateral-torsional buckling was calculated with the use of Autodesk Algor Simulation Professional 2012 program.
Keywords:
channel section, St. Venant torsion, warping torsion, bimomentReferences
PN-90/B-3200:1990 Konstrukcje stalowe - Obliczanie statyczne i projektowanie.
Google Scholar
PN-EN 1993-1-1:2006 Eurokod 3 - Projektowanie konstrukcji stalowych - Część 1-1: Reguły ogólne i reguły dla budynków.
Google Scholar
Timoshenko S. P. Einige Stabilitätsprobleme der Elastizitätstheorie.- Zeitschrift für Mathematik und Physik. 1910.
Google Scholar
Własow W. Z. Tonkostiennoje uprugije stierżni. Wyd. I, 1940, Wyd. II. Gosudarstwiennoje Izdztielstwo Fiziko-Matiematiczeskoj Litieratury. Moskwa 1959.
Google Scholar
Bogucki W. Poradnik projektanta konstrukcji metalowych. Tom I. Arkady. Warszawa 1980.
Google Scholar
Rules for Member Stability in EN 1993-1-1. Background documentation and design guidelines. ECCS Technical Committee 8 - Stability. 2006.
Google Scholar
Bródka J., Broniewicz M., Giżejowski M. Kształtowniki gięte. Poradnik projektanta. PWT. 2006.
Google Scholar
Gosowski B. Skręcanie i zginanie otwartych, stężonych elementów konstrukcji metalowych. Oficyna Wydawnicza Politechniki Wrocławskiej. Wrocław 2004.
Google Scholar
American Iron and Steel Institute. Specification for the Design of Cold-Formed Steel Structural Members. Publication CF 96-1. Washington D.C. 1996.
Google Scholar
AS/NZS 4600: Cold Formed-Steel Structures. Standards Association of Australia/New Zeland. 1996.
Google Scholar
www.autodesk.com
Google Scholar
Silva L.S., Simoes R., Gervasio H. Design of Steel Structures. ECCS Technical Committee. 2010.
Google Scholar
Trahair, NS (1993). Flexural-Torsional Buckling of Structures, E & FN SPON, London
DOI: https://doi.org/10.1201/9781482271218
Google Scholar
PN-EN 1993-1-3:2008 Eurokod 3 - Projektowanie konstrukcji stalowych - Część 1-3: Reguły ogólne - Reguły uzupełniające dla konstrukcji z kształtowników i blach profilowanych na zimno.
Google Scholar
Authors
Radosław SzczerbaDepartment of Building Structures; Faculty of Civil and Environmental Engineering; Rzeszów University of Technology Poland
Statistics
Abstract views: 209PDF downloads: 106
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Budownictwo i Architektura supports the open science program. The journal enables Open Access to their publications. Everyone can view, download and forward articles, provided that the terms of the license are respected.
Publishing of articles is possible after submitting a signed statement on the transfer of a license to the Journal.
