Next Article in Journal
New Perspectives on Circulating Ferritin: Its Role in Health and Disease
Previous Article in Journal
Separation of Boron and Arsenic from Geothermal Water with Novel Gel-Type Chelating Ion Exchange Resins: Batch and Column Sorption-Elution Studies
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Potent MOR Agonists from 2′-Hydroxy-5,9-dimethyl-N-phenethyl Substituted-6,7-benzomorphans and from C8-Hydroxy, Methylene and Methyl Derivatives of N-Phenethylnormetazocine

1
Drug Design and Synthesis Section, Molecular Targets and Medications Discovery Branch, Intramural Research Program, National Institute on Drug Abuse and the National Institute on Alcohol Abuse and Alcoholism, National Institutes of Health, Department of Health and Human Services, 9800 Medical Center Drive, Bethesda, MD 20892, USA
2
Department of Pharmaceutical Sciences, College of Pharmacy, University of Kentucky, 789 S. Limestone Street, Lexington, KY 40536, USA
3
Center for Biomolecular Science and Engineering, Naval Research Laboratory, Washington, DC 20375, USA
*
Authors to whom correspondence should be addressed.
Molecules 2023, 28(23), 7709; https://doi.org/10.3390/molecules28237709
Submission received: 18 October 2023 / Revised: 16 November 2023 / Accepted: 17 November 2023 / Published: 22 November 2023

Abstract

:
(−)-5,9-Dimethyl-6,7-benzomorphan (normetazocine) derivatives with a para-OH or ortho-F substituent in the aromatic ring of the N-phenethyl moiety were synthesized and found to have subnanomolar potency at MOR, and both were fully efficacious in vitro. These new compounds, (1R,5R,9R)-6,11-dimethyl-3-(2-fluorophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol and (1R,5R,9R)-6,11-dimethyl-3-(4-hydroxyphenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol, were more potent than the unsubstituted compound N-phenethylnormetazocine and about 30 or 40 times more potent than morphine, respectively. A variety of substituents in the ortho, meta, or para position in the aromatic ring of the N-phenethyl moiety were synthesized, 25 of these compounds, and found to have varying effects on potency and efficacy as determined by the forskolin-induced cAMP accumulation assay. The N-phenethyl moiety was also modified by increasing chain length to form a N-phenylpropyl side chain with and without a para-nitro moiety, and by an N-cinnamyl side chain. Also, an indole ethylamine normetazocine was synthesized to replace the N-phenethylamine side chain in normetazocine. The phenylpropylamine, propenylamine (cinnamyl) and the para-nitropropylamine had little or no MOR potency. The indole-ethylamine on the normetazocine nucleus, however, had moderate potency (MOR EC50 = 12 nM), and was fully efficacious (%Emax = 102%) in the cAMP assay. Retention of the N-phenethyl moiety and the addition of alkyl and alkenyl moieties on C8 in (−)-N-phenethylnormetazocine gave a C8-methylene derivative that had subnanomolar potency at MOR and a C8-methyl analog that had nanomolar potency. Five C8-substituted compounds were synthesized.

Graphical Abstract

1. Introduction

The 6,7-benzomorphans (Figure 1) have been of interest for the past several decades and analgesics based on them have been found to be clinically useful [1,2]. The 6,7-benzomorphan structure is derived from the morphinans. It lacks the morphinan C-ring, making the 6,7-benzomorphans less complex (Figure 1) than the morphinan or epoxymorphinan opioid structures. This structural modification did not necessarily lead to improved analgesics: e.g., a prototypical 6,7-benzomorphan, metazocine, N-methyl-5, 9-dimethyl-6,7-benzomorphan, not only acts at the mu opioid receptor (MOR) essentially like morphine, but also has dysphoric and hallucinogenic side-effects attributed to interaction with the kappa opioid receptor (KOR). Several of the derivatives of the 6,7-benzomorphans have been found to act as MOR agonists or antagonists, depending on the N-substituent. The racemic phenazocine (N-phenethyl relative of metazocine, Figure 1) was found to have milder side-effects in vivo (e.g., physical dependence, sedation, depression) than equivalent doses of morphine. Pentazocine, the N-dimethylallyl relative of metazocine, acts at both MOR and KOR and has been found to be a clinically useful analgesic with milder opioid-like side-effects. It is in clinical use and has been combined with naloxone to lessen its illicit use. The (+)-N-allylnormetazocine (SKF 10.047, Alazocine) is the prototypical sigma-1 receptor agonist [3] and does not interact at opioid receptors. Its (−)-enantiomer was found to be a MOR antagonist [4].
A considerable amount of effort has been expended on the synthesis of derivatives of the classical opioids [5], as well as the 6,7-benzomorphans [6,7,8,9,10,11,12], in an attempt to ameliorate their undesirable side-effects, with relatively little success [13].
Various alkyl moieties have been added to the 5,9-positions in the benzomorphan, cis and trans, and this has influenced the potency of the compound, but the side-effects were those noted for the classical opioids. When the phenolic hydroxyl was converted to a carbonamide function, it was found to have increased potency and, most interestingly, some of those benzomorphans were partial agonists in the [35S]GTPgS (GTP) assay [14,15]. Depending on the alkyl substituents at C5 and C9 and the stereochemistry of the molecule, changing the N-substituent has been shown to have a considerable effect on the benzomorphan [12], sometimes improving its potency and, in a few instances, changing its receptor interaction to that of a bifunctional ligand (MOR-σ1) [16].
We have found that substituents on the aromatic ring of the N-phenethyl substituent can modify the potency and efficacy of a different type of compound, norhydromorphone, as measured in the inhibition of forskolin-induced cAMP accumulation (cAMP) and [35S]GTPgS (GTP) functional assays [17]. The p-chlorophenethyl moiety was found to transform norhydromorphone into a bifunctional ligand that had subnanomolar potency at MOR and DOR in the cAMP assay, and that compound did not depress respiration in a rodent assay. We posed the question of whether we could obtain similar results with substituents on the aromatic ring in the N-phenethyl moiety of the 6,7-benzomorphans.
Many N-substituents have been synthesized in the 6,7-benzomorphans, including N-methyl through decyl [10], heterocyclic derivatives of the N-methyl substituent [18], cyanoalkyl, N-allyl and N-alkynyl [13], N-napthyl and quinolyl substituents, N-phenylpropanamide [12] and N-propyl amides [19]. N-Phenethyl-6,7-benzomorphans are very well-known [17,20], but a study of the in vitro effect of substituents on the aromatic ring in the N-phenethyl substituent is novel. In this work, a series of (−)-N-phenethylnormetazocines were synthesized with electron-withdrawing or -donating substituents on the aromatic ring of the N-phenethyl moiety to determine whether they could alter the functional effects of the 6,7-benzomorphans as measured in the cAMP assay and, possibly, convert them to partial agonists, compounds that are not as efficacious as morphine, with the hope that this would lessen their side-effects. Some partial agonists have been noted to have less effect than fully efficacious agonists like heroin or fentanyl on respiratory depression [21,22], a major cause of death due to opioid overdose.
The effect of substituents at C9 in the 5-(3-hydroxy)phenylmorphans, a position comparable to the C8 in normetazocine (Figure 1), has been extensively explored [20,21,22]. Substituents at C9 in the phenylmorphans and C8 in the benzomorphans are relatively close to the tertiary nitrogen atom. Substituents at C8 in 6,7-benzomorphan enantiomers are not well-known, and C8-alkyl and alkenyl-substituted N-phenethylnormetazocine enantiomers have not been previously examined. The (−)-N-phenethylnormetazocine enantiomers with a C8-methyl or C8 methylene substituent were found to be very potent MOR agonists and were fully efficacious.

2. Results and Discussion

2.1. Optical Resolution of (±)-Normetazocine

Starting with racemic normetazocine (rac-1, Scheme 1) [2], optical resolution was most easily achieved through treatment with (+)-3-bromo-8-camphorsulphonic acid (bromocamphorsulfonic acid) [23]. This resulted in enantiomerically pure (−)-normetazocine as the bromocamphorsulfonate salt (2). The optical purity was determined by NMR using (R)-(+)-methylbenzyl isocyanate for chiral derivatization in CDCl3/MeOD (1/1).

2.2. Substituents on the Aromatic Ring in the N-Phenethyl Side Chain

With the optically resolved (−)-normetazocine in hand, a series of N-substituted analogs were prepared using procedures in the literature (Scheme 2) [17]. The resolved (−)-2 was used as the bromocamphorsulfonate salt since it was found that the use of the isolated free base resulted in poorer yields. NaHCO3 (3 equivalents) was added to the reaction to generate the free base in situ. Heating the reaction at 100 °C overnight in DMF gave the desired N-substituted analogs in good yields. Various substituted N-phenethyl bromides and other miscellaneous alkyl bromides were used as alkylating agents.
All of the (−)-N-phenethyl-substituted compounds (4-nitro (3), 3-nitro (4), 2-nitro (5), 4-fluoro (6), 3-fluoro (7), 2-fluoro (8), 4-trifluoromethyl (9), 3-trifluoromethyl (10), 2-trifluoromethyl (11), 4-bromo (12), 3-bromo (13), 2-bromo (14), 4-chloro (15), 3-chloro (16), 2-chloro (17), 4-methoxy (18), 4-methyl (19), 4-hydroxy (20), 2,4-dichloro (21), and 2,6-dichloro (22), and the unsubstituted compound (23)), were converted to their HCl salts by dissolving the free base in hot alcohol (isopropanol, ethanol, or methanol) and then adding concentrated hydrochloric acid. The HCl salt crystallized after stirring the solution for a few hours, employing a slow diffusion method with diethyl ether. The HCl salts were recrystallized from hot isopropanol.

2.3. Modification of the N-Phenethyl Side Chain

Several other types of (−)-N-substituted compounds were synthesized (Scheme 3) and evaluated for their potency and efficacy (Table 1): an N-phenylpropyl substituent (−)-24, an N-cinnamyl substituent (−)-25, and an indole (−)-26.
We then turned to a piperidine analog, a compound bearing a 1-methylpiperidin-4-ylethyl side chain. (−)-Normetazocine, as the bromocamphorsulfonate salt ((−)-2•bromocamphorsulfonate), was treated with 2-(1-methylpiperidin-4-yl)acetic acid using HATU as a coupling agent. The resulting amide 27 then underwent a borane reduction [24] to give the desired 1-methylpiperidin-4-ylethyl analog (−)-28 (Scheme 4).
A different method was used to synthesize an N-(4-nitrophenylpropyl)-substituted analog (−)-31 because of the unavailability of 4-nitrophenylpropyl bromide. The synthesis was achieved by O-mesylating 3-(4-nitrophenyl)propan-1-ol, followed by a nucleophilic substitution with (−)-normetazocine (Scheme 5).

2.4. Synthesis of C8-Oxo-Normetazocine

A large-scale synthesis and subsequent optical resolution of a C8-oxo key intermediate (rac-2′-methoxy-8-oxo-N-phenethylnormetazocine, rac-34) was undertaken to obtain the starting material for the synthesis of alkenyl and alkyl substituents at that C8 position. The synthesis of the 2′-methoxy racemate rac-34 proceeded according to the literature [25,26] (for the comparable phenol), in good overall yield via a three-step process from normetazocine (1) (Scheme 6). Boc protection of the secondary amine in normetazocine, followed by methylation of the phenol and subsequent removal of the Boc group, provided 32 in 98% yield. The C8 position was oxidized using chromium trioxide to form the ketone 33 (63%). Finally, the key intermediate, rac-34, was synthesized via N-alkylation of the 8-oxo-2′-methoxy-normetazocine (34) with phenethyl bromide in high yield (80%). The ketone in 34 was found to be resistant to olefination under Wittig or HWE conditions as well as with oxo-nucleophiles. It did, however, react with organometallics such as alkyl lithiates and Grignard reagents.

2.5. Synthesis of the Optical Isomers of C8-oxo m-Methoxy-N-phenethyl-6,7-benzomorphan

While we had successfully resolved normetazocine based on methodology in the literature [27], we preferred to carry the synthesis of the C8-substituted compounds up to rac-34 (Scheme 6) and resolve that compound because that would enable us to run initial exploratory reactions on the available racemic compound. After screening conditions for crystallization, a combination of DMF and acetone was found to be ideal for the optical resolution of rac-34 with (+)-tartaric acid as the chiral acid (Scheme 7). Crystallization occurred after cooling to 0 °C. Conversion to the free base gave, after crystallization, 1S,5R,9R (−)-34. Its (+)-enantiomer (1R,5S,9S-(+)-34) was obtained after treatment with (−)-tartaric acid of the rac-34 base obtained from the residual (+)-tartrate salt of (−)-34. These enantiomers had optical rotations of −41.3° and +44.4°, respectively. The resolution of rac-34 was scaled up to provide the needed quantity, and both enantiomers were collected at greater than 90% yield (Scheme 7).
With the free bases in hand, a way to quantitatively confirm the enantiomeric excess was needed, and several NMR chiral solvating reagents were studied for that purpose (Figure 2).
The only reagent that was found to be successful for the separation of the enantiomers of 34 so that they could be clearly observed in their NMR spectra was 1-(anthracen-9-yl)-2,2,2-trifluoroethan-1-ol. The two peaks that were most resolved in the 1H-NMR spectra and that could be used for determining enantiomeric excess were the methyl doublet and the farthest down-field aryl signal. After a single recrystallization, an enantiomeric excess of >98% was achieved for both enantiomers (see Supplementary Materials for NMR spectra). With a successful resolution method, we needed to determine the absolute configuration of the two enantiomers. Although tartaric acid resolved rac-34 well, it did not provide a proper crystalline form for X-ray spectroscopic determination. A small amount of each enantiomer base was dissolved in acetone and seven drops of concentrated hydrobromic acid added. As the acetone evaporated under ambient pressure, colorless needles formed. The crystals of the HBr salt of (+)-34 were used for the X-ray crystallographic analysis (Figure 3). The crystal structure analysis confirmed both the overall structure and the absolute configuration for the enantiomeric compounds.
With the enantiopure (−)- and (+)-34 in hand, we pursued the synthesis of the C8-hydroxy, methylene and methyl compounds.
The C8-hydroxy compounds were synthesized from the resolved N-phenethyl C-8 ketones (−)- and (+)-34 using lithium aluminum hydride to give the phenolic ethers (−)- and (+)-35 (Scheme 8). O-Demethylation with BBr3 gave the desired phenols (−)- and (+)-36.
The reaction of (−)- and (+)-34 with methyl lithium (Scheme 9) gave the intermediate C8-hydroxymethyl compounds (−)- and (+)-37 that could be converted to the phenolic C8-vinyl compounds (−)- and (+)-38 on treatment with BBr3. Catalytic reduction of the vinyl compounds gave the desired C8-methyl enantiomers (−)- and (+)-39.

2.6. Forskolin-Induced cAMP Accumulation Assay for In Vitro Determination of the Potency and Efficacy of the Benzomorphans

Both electron-withdrawing (e.g., NO2, (−)-3) and -donating (e.g., OH, (−)-20) substituents at the para position led to highly MOR potent compounds in vitro (Table 1) with EC50 values in the subnanomolar range EC50 = 0.3 nM and 0.13 nM, respectively. Some of the ortho-substituents (e.g., 2-F (−)-8) were also extremely potent MOR agonists (EC50 = 0.2 nM). The para-OH (−)-20 and the ortho-F ((−)-8) compounds were among the few synthesized compounds that were more potent than the unsubstituted benzomorphan (−)-23 (EC50 = 0.27 nM). The meta-substituted compounds were in general much less potent than the comparable ortho- and para-analogs, except for the meta-fluoro analog (−)-7 (EC50 = 0.6 nM) that was more potent than the para-fluoro analog (−)-6 (EC50 = 1.8 nM). Addition of a second chloro substituent 2,4-dichloro, 21 (EC50 = 5 nM) or 2,6-dichloro, 22 (EC50 = 4 nM) on the aromatic ring reduced the potency of the ortho (17, EC50 = 1.4 nM) or para (15, EC50 = 1.3 nM) monochloro-compound. No clear pattern between agonist potency and electron donating or withdrawal effects was observed. A steric effect due to bulky substituents was also not observed (e.g., the bulky para-Br (12, EC50 = 0.7 nM) and the less bulky para-fluoro substituent (6, EC50 = 1.8 nM)). A second example of that could be seen with the bulky para-nitro (3) substituted compound having subnanomolar MOR affinity (EC50 = 0.3 nM). However, the bulky trifluoromethyl at the para position was less potent (9, EC50 = 2 nM) than compounds with bromo, chloro, or nitro substituents in the para position on the aromatic ring, and the dichloro compounds (21 and 22) were also less potent than the para-monochloro compound 15. A steric effect that might influence potency at MOR was not clearly observed. Three compounds showed an increase in DOR potency, compared with the unsubstituted N-phenethylnormetazocine (23). The para-nitro, para-trifluoromethyl, para-bromo, and para-chloro substituted compounds (3, 9, 12, and 15, respectively) were several-fold more potent than the unsubstituted compound 23, and these substituents did not modify efficacy—they were all partial DOR agonists. All of the examined compounds were less potent at KOR than the unsubstituted compound 23. However, 23 had very low efficacy at KOR (EC50 = 3.4 nM, %Emax = 25%), and most of the compounds with substituents in the aromatic ring in the N-phenethyl side chain had greater efficacy and would, theoretically, be more likely to show the dysphoric and hallucinogenic side-effects known to occur with KOR agonists than the unsubstituted compound 23.
Table 1. Opioid Receptor Activity Measured in the Forskolin-induced cAMP Accumulation Assay a.
Table 1. Opioid Receptor Activity Measured in the Forskolin-induced cAMP Accumulation Assay a.
MORMORDORDORKORKOR
AgonistAntagonist bAgonistAntagonist cAgonistAntagonist d
Compound Number
(3–31 (−)-Enantiomers)
StructureEC50 ± SEM (nM)
(%Emax ± SEM)
IC50 ± SEM (nM)
(%Imax ± SEM)
EC50 ± SEM (nM)
(%Emax ± SEM)
IC50 ± SEM (nM)
(%Imax ± SEM)
EC50 ± SEM (nM)
(%Emax ± SEM)
IC50 ± SEM (nM)
(%Imax ± SEM)
Molecules 28 07709 i001
R =
302-00114-NO20.3 ± 0.05
(101 ± 1%)
N/D2.7 ± 1.0
(88 ± 5%)
N/D13 ± 0.5
(46 ± 7%)
N/D
402-00153-NO226 ± 4.0
(71 ± 12%)
N/DN/DN/DN/DN/D
502-00182-NO22.7 ± 0.4
(101 ± 0.2%)
N/D37 ± 6
(73 ± 14%)
N/D16 ± 4
(23 ± 8%)
717 ± 132
(89 ± 5%)
602-00064-F1.8 ± 0.3
(103 ± 0.2%)
N/D12 ± 3
(73 ± 11%)
N/D7 ± 3
(34± 6%)
368 ± 92
(71 ± 2%)
702-00233-F0.6 ± 0.1
(100 ± 1%)
N/D11± 4
(86 ± 5%)
N/D>10,000274 ± 83
(87 ± 2%)
802-00202-F0.2 ± 0.1
(101 ± 1%)
N/D6 ± 2
(87± 5%)
N/D6 ± 1
(45 ± 7%)
N/D
902-00174-CF32 ± 1
(102 ± 1%)
N/D3 ± 1
(72 ± 14%)
N/D23 ± 5
(100 ± 2%)
N/D
1002-00243-CF3167 ± 72
(63 ± 13%)
N/DN/DN/DN/DN/D
1102-00082-CF36 ± 0.2
(102 ± 1%)
N/D24 ± 5
(77 ± 9%)
N/D36 ± 3
(72 ± 6%)
N/D
1202-00104-Br0.7 ± 0.2 (102 ± 1%)N/D1.1 ± 0.3
(89± 4%)
N/D5 ± 2
(100 ±1%)
N/D
1302-00143-Br18 ± 7
(78 ± 9%)
N/D110 ± 24
(51 ± 4%)
N/D>10,00090 ± 37
(99 ± 2%)
1402-00212-Br2 ± 0.4
(101 ± 2%)
N/D13 ± 2
(89 ± 6%)
N/D16 ± 2
(80 ± 6%)
N/D
1502-00094-Cl1.3 ± 0.4
(103 ± 1%)
N/D1.2 ± 0.5
(89 ± 6%)
N/D5 ± 1
(97 ± 1%)
N/D
1602-00123-Cl13 ± 2
(95 ± 2%)
N/D93 ± 25
(64 ± 6%)
N/D>10,000111 ± 43
(108 ± 10%)
1702-00222-Cl1.4 ± 0.3
(101 ± 1%)
N/D15 ± 4.0
(87 ± 5%)
N/D8 ± 1
(57 ±11%)
N/D
1802-00074-OMe1.2 ± 0.4
(103 ± 0.3%)
N/D4 ± 1
(87 ± 6%)
N/D9 ± 2
(89 ± 3%)
N/D
1902-00054-Me1.4 ± 0.4
(103 ± 1%)
N/D5 ± 2
(87± 5%)
N/D13 ± 3
(93 ± 3%)
N/D
2002-00194-OH0.13 ± 0.02
(102 ± 0.4%)
N/D5 ± 1
(84 ± 5%)
N/D8 ± 3
(97 ± 1%)
N/D
2102-00252,4-dichloro5 ± 3
(103 ± 1%)
N/D37 ± 9
(86 ± 12%)
N/D42 ± 10
(93± 5%)
N/D
2202-00262,6-dichloro4 ± 1
(99 ± 2%)
N/D59 ± 25
(78 ± 11%)
N/D>10,00065 ± 24
(87 ± 7%)
2302-013H0.27 ± 0.1
(101 ± 0.3%)
N/D4 ± 1
(85 ± 6%)
N/D3.4 ± 0.4
(25 ± 5%)
281± 94
(81 ± 5%)
Molecules 28 07709 i002
N-R1 =
2402-0027Molecules 28 07709 i00369 ± 13
(100 ± 1%)
N/DN/DN/DN/DN/D
2502-0029Molecules 28 07709 i004244 ± 58
(101 ± 1%)
N/DN/DN/DN/DN/D
2602-0034Molecules 28 07709 i00512 ± 1
(102 ± 1%)
N/D343 ± 35
(91 ± 5%)
N/D>10,000>10,000
2802-0057Molecules 28 07709 i006>10,000>10,000>10,000>10,0000.05 ± 0.02
(15 ± 3%)
>10,000
3102-0033Molecules 28 07709 i007>10,000>10,000N/DN/DN/DN/D
C8-Substituted
(+)-36GW-S-01-73Molecules 28 07709 i00825.2 ± 5.9
(103 ± 0.3%),
N/D1906 ± 232
(97 ± 4.2%)
N/D>10,000N/D
(+)-38GW-S-01-75Molecules 28 07709 i00970 ± 15
(102 ± 1%)
N/D978 ± 374
(92 ± 3.6%)
N/D1181 ± 46
(53 ± 6.3%)
N/D
(−)-38GW-S-01-76Molecules 28 07709 i0100.23 ± 0.01
(101 ± 0.4%)
N/D4.9 ± 3.0
(89 ± 2.6%)
N/D9.5 ± 2.0
(57 ± 7.6%)
N/D
(+)-39GW-01-106Molecules 28 07709 i01121.7 ± 10.4
(103% ± 1.5%)
N/D1338 ± 389
(94 ± 1.7%)
N/D953 ± 120
(37 ± 5.4%)
>10,000
(−)-39GW-01-107Molecules 28 07709 i0121.2 ± 0.5
(102% ± 1%)
N/D12.6 ± 3.9
(91± 2.2%)
N/D20.7 ± 6.1
(38 ± 8.0%)
731 ± 362
(57 ± 5%)
Standards
Morphine5.8 ± 0.3
(102 ± 0.1%)
DAMGO0.3 ± 0.1
(103 ± 1%)
U50488H 0.3 ± 0.03
(100 ± 0.3%)
SNC80 1.7 ± 0.2
(79 ± 2%)
Naltrexone2.1 ± 1.2
(30 ± 6%)
11 ± 1
(104 ± 1%)
>10,000295 ± 48
(99 ± 1%)
0.6 ± 0.3
(57 ± 7%)
6 ± 1
(41 ± 7%)
nor-BNI 2.3 ± 0.3
(102 ± 1%)
a Inhibition of forskolin-induced cAMP accumulation; cAMP HunterTM Chinese hamster ovary cells (CHO-K1) that express human μ-opioid receptor (OPRM1), human κ-opioid receptor (OPRK1), and human δ-opioid receptor (OPRD1) were used for the forskolin-induced cAMP accumulation assay to determine potency and efficacy of the compounds following the previously established methods [28]; to determine % efficacy in forskolin-induced cAMP assays, data were blank subtracted with the vehicle control, followed by normalization to the forskolin control. Data were then analyzed in GraphPad Prism 8 (GraphPad, LaJolla, CA, USA) using nonlinear regression; values are expressed as the mean ± SEM of at least three independent experiments; N/D = not determined (MOR antagonist activity was not determined when a compound had potent, fully efficacious MOR agonist activity; DOR and KOR agonist activity were not determined if the MOR agonist activity was less than 20 nM). b MOR antagonist potency (IC50) determined versus EC90 of fentanyl; degree of antagonism (Imax) normalized to naltrexone. c DOR antagonist potency (IC50) determined versus EC50 of SNC80; degree of antagonism (Imax) normalized to naltrexone. d KOR antagonist potency (IC50) determined versus EC90 of U50488H; degree of antagonism (Imax) normalized to nor-BNI.
The N-phenethyl side-chain-modified benzomorphans (−)-24, (−)-25, (−)-28 and (−)-31 (Table 1) were found to have little or no potency in vitro at MOR. The indole (−)-26, however, was fully efficacious and had moderate MOR agonist activity (EC50 = 12 nM, %Emax = 102%). Apparently, the addition of a single methylene in the side chain of the N-phenethyl moiety, to give an N-phenylpropyl derivative (−)-24, changed the highly MOR potent N-phenethyl compound (−)-23 (EC50 = 0.27, %Emax = 101%) into a relatively inactive compound (−)-24 (EC50 = 69 nM). Introduction of a double-bond in the side chain to give the cinnamyl derivative (−)-25, decreased the potency even more (EC50 = 244 nM). The addition of a para-nitro moiety to the N-phenylpropyl side chain gave a totally inactive compound (−)-31 (MOR agonist EC50 ≥ 10,000 nM), in contrast with the para-nitro N-phenethyl compound (−)-3 with a MOR EC50 = 0.3 nM. The saturated 1-methylpiperidine substituent (−)-28 was also inactive at MOR, but showed high agonist potency at KOR, although with very little efficacy (EC50 = 0.05 nM, %Emax = 15%).
All the C8 compounds were fully efficacious. As expected, the (+)-C8-compounds (+)-36, (+)-38, and (+)-39 were much less potent than the levorotatory compounds (−)-38 and (−)-39 at MOR. This was expected, since dextrorotatory benzomorphans are usually much less active than their levorotatory relatives. Two (+)-compounds, the C8-hydroxy and methyl derivatives (+)-36 and (+)-39, had moderate MOR potency (EC50 = 25.2 and 21.7 nM, respectively) and the (+)-methylene compound (+)-38 was considerably less potent (EC50 = 70 nM). The methylene compound (−)-38 was found to have MOR subnanomolar potency (EC50 = 0.23 nM); it was about 25 times more potent than morphine. The C8-methyl compound (−)-39 was also quite potent, with an EC50 = 1.2 nM. Both the C8-methylene ((-)-38) and methyl ((-)-39) compounds had moderate potency at DOR, and neither was as potent as the unsubstituted compound 23 at DOR or KOR. Both compounds had nearly full efficacy at DOR, and both had little efficacy at KOR.

3. Materials and Methods

3.1. General Information

All reactions were performed in oven-dried glassware under an argon atmosphere unless otherwise noted. Proton (1H NMR) and carbon (13C NMR) spectra were recorded on a Varian Gemini-400 spectrometer at 400 MHz for 1H NMR and 101 MHz for 13C NMR. Mass spectra (HRMS) were recorded on a Waters (Mitford, MA, USA) Xevo-G X5 QTof. The optical rotation data were obtained on a PerkinElmer polarimeter model 341, and melting points were obtained using a Thomas-Hoover melting point apparatus. Thin layer chromatography (TLC) was performed on a 250 mm Analtech GHLF. Visualization was accomplished under UV or by staining in an iodine chamber. Flash column chromatography was performed with Fluka silica gel 60 (mesh 220−400). Elemental analyses were performed by Robertson Microlit Laboratories, Ledgewood, NJ, USA.

3.2. Synthesis

Optical resolution of rac-normetazocine (rac-1). rac-Normetazocine was optically resolved using a procedure in the literature [23] to obtain (−)-normetazocine (−)-1. rac-Normetazocine (rac-1, 10.6 g, 1 equiv, 48.8 mmol) was suspended in H2O (56 mL). Then, 37% HCl (1.78 g, 4.06 mL, 12 molar, 1 equiv, 48.8 mmol) was added to the solution, followed by (+)-3-bromo-8-camphorsulfonic acid ammonium salt (16.0 g, 1 equiv, 48.8 mmol) and 1,3-dioxolane (5.6 mL). The solution was heated to 100 °C until all of the solids dissolved. The solution was allowed to cool to room temperature and stirred for 1 h. The crystals that formed were filtered and washed with 10% 1,3-dioxolane in H2O. The salt was recrystallized 2x from 12% 1,3-dioxolane in H2O and dried under high vacuum at 60 °C overnight. NMR studies using (R)-(+)-methylbenzyl isocyanate in CDCl3:CD3OD (1:1) indicated >99% optical purity.
General procedure for N-alkylation of (−)-normetazocine. Optically resolved (−)-2•bromocamphorsulfonate salt (1 equiv, 1.89 mmol), sodium bicarbonate (3 equiv, 3.69 mmol) and the alkyl bromide (1.5 equiv,1.84 mmol) were combined in anhydrous DMF (15 mL). The reaction was stirred at 100 °C for 20 h. The reaction was cooled to room temperature, and H2O (20 mL) was added. The mixture was transferred to a separatory funnel and extracted with CHCl3 (3 × 20 mL). The organic layers were combined and washed with H2O (5 × 10 mL) and brine (20 mL). The organic layer was dried over anhydrous Na2SO4 and filtered. The solvent was removed, and the residual material was purified by flash chromatography (gradient 1–10% MeOH/NH4OH in CHCl3).
  • (1R,5R,9R)-6,11-Dimethyl-3-(4-nitrophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-3). General procedure was used, and the alkylation was achieved with 4-nitrophenethyl bromide. The product was obtained as a pale-yellow solid (300 mg, 67%), mp (HCl salt) 273–274 °C (dec). 1H NMR (400 MHz; CD3OD): δ 7.43–7.40 (m, 2H), 7.17–7.14 (m, 2H), 6.89 (d, J = 8.3 Hz, 1H), 6.69 (d, J = 2.5 Hz, 1H), 6.56 (dd, J = 8.2, 2.6 Hz, 1H), 3.02 (dd, J = 5.5, 3.1 Hz, 1H), 2.92 (d, J = 18.3 Hz, 1H), 2.80–2.74 (m, 3H), 2.72–2.61 (m, 3H), 2.13 (td, J = 12.4, 3.2 Hz, 1H), 1.88 (dd, J = 7.0, 3.0 Hz, 1H), 1.81 (td, J = 12.9, 4.7 Hz, 1H), 1.34 (s, 3H), 1.32 (t, J = 2.5 Hz, 1H), 0.87 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 148.4, 146.5, 142.2, 129.4, 127.7, 126.7, 123.0, 112.7, 111.6, 57.6, 55.7, 45.5, 41.5, 41.2, 35.9, 33.3, 24.4, 22.8, 13.0. HRMS (ES+) Calcd. For C22H27N2O3, 367.2022 (M+H)+; found, 367.2016. [α]20D –94.8° (c 1.17, CHCl3/MeOH (9/1)). Anal. Calcd. For C22H27ClN2O3 • 0.15 C3H8O: C, 65.46; H, 6.90; N, 6.80. Found: C, 65.60; H, 6.94; N, 6.66.
  • (1R,5R,9R)-6,11-Dimethyl-3-(3-nitrophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-4). General procedure was used, and the alkylation was achieved with 3-nitrophenethyl bromide. The product was obtained as a pale-yellow solid (276 mg, 81%), mp (HCl salt) 259–262 °C (dec). 1H NMR (400 MHz; CD3OD): δ 8.16 (t, J = 1.8 Hz, 1H), 8.10–8.07 (m, 1H), 7.67 (d, J = 7.7 Hz, 1H), 7.54 (t, J = 7.9 Hz, 1H), 6.91 (d, J = 8.3 Hz, 1H), 6.70 (d, J = 2.5 Hz, 1H), 6.57 (dd, J = 8.2, 2.6 Hz, 1H), 3.04 (dd, J = 5.5, 3.1 Hz, 1H), 2.95 (dt, J = 10.4, 4.2 Hz, 3H), 2.89–2.81 (m, 1H), 2.78–2.64 (m, 3H), 2.18 (td, J = 12.4, 3.2 Hz, 1H), 1.89 (dd, J = 7.1, 3.0 Hz, 1H), 1.83 (td, J = 12.9, 4.7 Hz, 1H), 1.36 (s, 3H), 1.32 (d, J = 20.7 Hz, 1H), 0.88 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 148.3, 142.5, 142.2, 134.9, 129.1, 127.7, 126.6, 123.1, 120.7, 112.8, 111.6, 57.6, 55.8, 45.5, 41.5, 41.2, 35.9, 32.9, 24.5, 22.8, 13.0. HRMS (ES+) Calcd. For C22H27N2O3, 367.2022 (M+H)+; found, 367.2022[α]20D –94.5° (c 1.1, CHCl3/MeOH (9/1)). Anal. Calcd. For C22H27ClN2O3 • 0.25 C3H8O: C, 65.38; H, 6.99; N, 6.70. Found: C, 65.19; H, 6.80; N, 6.82.
  • (1R,5R,9R)-6,11-Dimethyl-3-(2-nitrophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((-)-5). General procedure was used, and the alkylation was achieved with 2-nitrophenethyl bromide. The product was obtained as a pale-yellow solid (265 mg, 76%), mp (HCl salt) 237–239 °C (dec). 1H NMR (400 MHz; CD3OD): δ 7.89 (dd, J = 8.2, 1.1 Hz, 1H), 7.59 (td, J = 7.5, 1.2 Hz, 1H), 7.47 (dd, J = 7.7, 1.2 Hz, 1H), 7.44–7.40 (m, 1H), 6.88 (d, J = 8.3 Hz, 1H), 6.68 (d, J = 2.5 Hz, 1H), 6.55 (dd, J = 8.2, 2.6 Hz, 1H), 3.13 (ddd, J = 12.5, 10.5, 5.9 Hz, 1H), 3.03–2.94 (m, 2H), 2.91 (d, J = 18.4 Hz, 1H), 2.86–2.79 (m, 1H), 2.71–2.64 (m, 2H), 2.59 (dd, J = 11.9, 3.1 Hz, 1H), 2.14 (td, J = 12.4, 3.2 Hz, 1H), 1.87 (dd, J = 7.1, 3.0 Hz, 1H), 1.81 (td, J = 12.8, 4.7 Hz, 1H), 1.33 (s, 3H), 1.29 (t, J = 2.4 Hz, 1H), 0.84 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.3, 149.7, 142.3, 134.7, 132.7, 132.3, 127.7, 127.2, 126.8, 124.1, 112.7, 111.6, 57.7, 55.6, 45.6, 41.4, 41.0, 35.9, 30.5, 24.5, 23.1, 13.1. HRMS (ES+) Calcd. For C22H27N2O3, 367.2022 (M+H)+; found, 367.2020. [α]20D –87.8° (c 1.4, CHCl3/MeOH (9/1)). Anal. Calcd. For C22H27ClN2O3 • 0.3 H2O • 0.5 C3H8O: C, 64.39; H, 7.27; N, 6.39. Found: C, 64.34; H, 7.32; N, 6.42.
  • (2R,6R,11R)-6,11-Dimethyl-3-(4-fluorophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-6). General procedure was used, and the alkylation was achieved with 4-fluorophenethyl bromide. The product was obtained as a pale-yellow solid (500 mg, 83%), mp (HCl salt) 303–304 °C(dec). 1H-NMR (400 MHz; CD3OD): δ 7.23–7.20 (m, 2H), 7.00–6.95 (m, 2H), 6.88 (d, J = 8.3 Hz, 1H), 6.67 (d, J = 2.5 Hz, 1H), 6.54 (dd, J = 8.2, 2.6 Hz, 1H), 3.02 (dd, J = 5.6, 3.2 Hz, 1H), 2.91 (d, J = 18.4 Hz, 1H), 2.80–2.59 (m, 6H), 2.12 (td, J = 12.4, 3.2 Hz, 1H), 1.87 (dd, J = 7.0, 3.0 Hz, 1H), 1.80 (td, J = 12.9, 4.7 Hz, 1H), 1.33 (s, 3H), 1.30 (t, J = 2.3 Hz, 1H), 0.85 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 160.2 (2), 155.4, 142.2, 135.90 (2), 129.84 (2), 127.7, 126.6, 114.5 (2), 112.8, 111.6, 57.3, 56.6, 47.87, 47.83, 47.5, 45.6, 41.4, 41.1, 35.9, 32.5, 24.5, 22.5, 13.1. HRMS (ES+) Calcd. For C22H27FNO, 340.2077 (M+H)+; found, 340.2075[α]20D –109.7° (c 1.0, CHCl3/MeOH (9/1)). Anal. Calcd. For C22H27ClFNO: C, 70.29; H, 7.24; N, 3.73. Found: C, 70.55; H, 7.23; N, 3.71.
  • (1R,5R,9R)-6,11-Dimethyl-3-(3-fluorophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-7). General procedure was used, and the alkylation was achieved with 3-fluorophenethyl bromide. The product was obtained as a pale-yellow solid (200 mg, 64%), mp (HCl salt) 268–270 °C (dec). 1H NMR (400 MHz; CD3OD): δ 7.26 (td, J = 7.9, 6.1 Hz, 1H), 7.03 (d, J = 7.7 Hz, 1H), 6.97 (dt, J = 10.1, 2.0 Hz, 1H), 6.92–6.88 (m, 2H), 6.67 (d, J = 2.5 Hz, 1H), 6.55 (dd, J = 8.2, 2.6 Hz, 1H), 3.07 (dd, J = 5.6, 3.1 Hz, 1H), 2.92 (d, J = 18.4 Hz, 1H), 2.85–2.78 (m, 3H), 2.75–2.63 (m, 3H), 2.17 (td, J = 12.5, 3.2 Hz, 1H), 1.89 (tt, J = 7.0, 3.5 Hz, 1H), 1.81 (td, J = 13.0, 4.7 Hz, 1H), 1.35 (dd, J = 3.1, 2.1 Hz, 1H), 1.33 (s, 3H), 0.86 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 162.9 (2), 155.5, 142.6 (2), 142.0, 129.7 (2), 127.7, 126.3, 124.1 (2), 115.0 (2), 112.9, 112.4 (2), 111.6, 57.6, 56.0, 45.6, 41.2, 40.9, 35.8, 32.9, 24.4, 22.6, 13.0. HRMS (ES+) Calcd. For C22H27FNO, (M+H)+ 340.2077; found, 340.2071[α]20D –99.1° (c 0.97, CHCl3/MeOH (9/1)). Anal. Calcd. For C22H27ClFNO: C, 70.13; H, 7.25; N, 3.72. Found: C, 69.90; H, 6.96; N, 3.75.
  • (1R,5R,9R)-6,11-Dimethyl-3-(2-fluorophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-8). General procedure was used, and the alkylation was achieved with 2-fluorophenethyl bromide. The product was obtained as a pale-yellow solid (200 mg, 62%), mp (HCl salt) 263–265 °C (dec). 1H NMR (400 MHz; CD3OD): δ 7.25 (td, J = 7.6, 1.6 Hz, 1H), 7.19 (ddd, J = 7.6, 5.5, 2.0 Hz, 1H), 7.09–7.05 (m, 1H), 7.04–6.99 (m, 1H), 6.87 (d, J = 8.3 Hz, 1H), 6.67 (d, J = 2.5 Hz, 1H), 6.54 (dd, J = 8.2, 2.5 Hz, 1H), 3.05 (dd, J = 5.5, 3.1 Hz, 1H), 2.93–2.84 (m, 2H), 2.78 (ddt, J = 19.8, 12.3, 6.4 Hz, 2H), 2.70–2.67 (m, 1H), 2.65–2.61 (m, 2H), 2.13 (td, J = 12.4, 3.2 Hz, 1H), 1.88 (dd, J = 7.0, 3.0 Hz, 1H), 1.81 (td, J = 12.9, 4.7 Hz, 1H), 1.32 (s, 3H), 1.30 (t, J = 2.4 Hz, 1H), 0.85 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 161.1 (2), 155.4, 142.1, 130.7 (2), 127.8 (2), 127.7, 126.5 (2), 126.4, 123.9 (2), 114.8, 114.6, 112.8, 111.6, 57.4, 54.9, 45.6, 41.3, 40.9, 35.8, 26.59, 26.57, 24.4, 22.6, 13.1. HRMS (ES+) Calcd. For C22H27FNO, 340.2077 (M+H)+; found, 340.2082[α]20D –107.1° (c 1.0, CHCl3/MeOH (9/1)). Anal. Calcd. For C22H27ClFNO: C, 70.29; H, 7.24; N, 3.73. Found: C, 70.13; H, 6.94; N, 3.75.
  • (1R,5R,9R)-6,11-Dimethyl-3-(4-trifluoromethylphenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-9). General procedure was used, and the alkylation was achieved with 4-trifluoromethylphenethyl bromide. The product was obtained as a pale-yellow solid (260 mg, 59%), mp (HCl salt) 283–285 °C (dec). 1H NMR (400 MHz; CD3OD): δ 7.58 (d, J = 8.1 Hz, 2H), 7.43 (d, J = 8.1 Hz, 2H), 6.90 (d, J = 8.3 Hz, 1H), 6.70 (d, J = 2.5 Hz, 1H), 6.57 (dd, J = 8.2, 2.6 Hz, 1H), 3.04 (dd, J = 5.6, 3.1 Hz, 1H), 2.96–2.87 (m, 3H), 2.86–2.77 (m, 1H), 2.74–2.62 (m, 3H), 2.15 (td, J = 12.4, 3.2 Hz, 1H), 1.90 (td, J = 7.0, 3.0 Hz, 1H), 1.83 (td, J = 12.8, 4.7 Hz, 1H), 1.35 (s, 3H), 1.33 (t, J = 2.5 Hz, 1H), 0.88 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz, CD3OD): d 155.4, 144.8, 142.2, 129.0, 128.0 (4), 127.5, 126.6, 124.8 (4), 124.4 (4), 112.8, 111.6, 57.4, 56.0, 45.5, 41.4, 41.1, 35.9, 33.2, 24.5, 22.6, 13.1. HRMS (ES+) Calcd. For C23H27NOF3, 390.2045 (M+H)+; found, 390.2043[α]20D –87.5° (c 1.0, CHCl3/MeOH (9/1)). Anal. Calcd. For C23H27ClF3NO • 0.05 C3H8O: C, 64.83; H, 6.44; N, 3.27. Found: C, 64.84; H, 6.30; N, 3.10.
  • (1R,5R,9R)-6,11-Dimethyl-3-(3-trifluoromethylphenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-10). General procedure was used, and the alkylation was achieved with 3-trifluoromethylphenethyl bromide. The product was obtained as a pale-yellow solid (280 mg, 77%), mp (HCl salt) 282.2–284.0 °C (dec). 1H NMR (400 MHz; CD3OD): δ 7.53 (s, 1H), 7.49–7.42 (m, 3H), 6.87 (d, J = 8.3 Hz, 1H), 6.67 (d, J = 2.5 Hz, 1H), 6.54 (dd, J = 8.2, 2.5 Hz, 1H), 3.00 (dd, J = 5.3, 3.1 Hz, 1H), 2.92–2.84 (m, 3H), 2.80–2.75 (m, 1H), 2.73–2.58 (m, 3H), 2.13 (td, J = 12.4, 3.1 Hz, 1H), 1.86 (dd, J = 7.0, 2.9 Hz, 1H), 1.79 (td, J = 12.9, 4.7 Hz, 1H), 1.32 (s, 3H), 1.30 (s, 1H), 0.84 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 142.2, 141.5, 132.2, 130.2 (4), 128.8, 127.7, 126.7, 125.0 (4), 124.3 (4), 122.5 (4), 112.8, 111.6, 57.5, 56.1, 45.5, 41.5, 41.1, 35.9, 33.1, 24.5, 22.7, 13.1. HRMS (ES+) Calcd. For C23H27F3NO, (M+H)+ 390.2045; found, 390.2040[α]20D –91.0° (c 1.2, CHCl3/MeOH (9/1)). Anal. Calcd. For C23H27ClF3NO: C, 64.86; H, 6.39; N, 3.29. Found: C, 64.64; H, 6.12; N, 3.23.
  • (1R,5R,9R)-6,11-Dimethyl-3-(2-trifluoromethylphenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-11). General procedure was used, and the alkylation was achieved with 2-trifluoromethylphenethyl bromide. The product was obtained as a pale-yellow solid (100 mg, 14%), mp (HCl salt) 215–217 °C. 1H NMR (400 MHz; CD3OD): δ 7.63 (d, J = 7.9 Hz, 1H), 7.53 (t, J = 7.5 Hz, 1H), 7.44 (d, J = 7.6 Hz, 1H), 7.35 (t, J = 7.6 Hz, 1H), 6.87 (d, J = 8.3 Hz, 1H), 6.67 (d, J = 2.5 Hz, 1H), 6.54 (dd, J = 8.2, 2.5 Hz, 1H), 3.02–2.94 (m, 3H), 2.89 (d, J = 18.3 Hz, 1H), 2.77 (td, J = 11.6, 5.9 Hz, 1H), 2.70–2.61 (m, 3H), 2.14 (td, J = 12.4, 3.1 Hz, 1H), 1.89 (dd, J = 7.0, 2.9 Hz, 1H), 1.82 (td, J = 12.9, 4.7 Hz, 1H), 1.33 (s, 3H), 1.29 (d, J = 18.1 Hz, 1H), 0.86 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 142.2, 138.5, 131.9, 131.6, 128.2, 127.7, 126.6, 126.5 (4), 126.21, 125.4 (4), 112.8, 111.6, 57.7, 56.5, 48.2, 47.8, 46.9, 45.6, 41.4, 41.0, 35.9, 30.3, 24.5, 22.8, 13.1. HRMS (ES+) Calcd. For C23H27F3NO2, 390.2045 (M+H)+; found, 390.2050[α]20D –109.8° (c 1.0, CHCl3/MeOH (9/1)). Anal. Calcd. For C23H27ClF3NO2 • 0.6 C3H8O: C, 64.48; H, 6.94; N, 3.03. Found: C, 64.51; H, 6.95; N, 3.03.
  • (1R,5R,9R)-6,11-Dimethyl-3-(4-bromophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-12). General procedure was used, and the alkylation was achieved with 4-bromophenethyl bromide. The product was obtained as a pale-yellow solid (311 mg, 63%), mp (HCl salt) 292–293 °C (dec). 1H NMR (400 MHz; CD3OD): δ 7.43–7.40 (m, 2H), 7.17–7.14 (m, 2H), 6.89 (d, J = 8.3 Hz, 1H), 6.69 (d, J = 2.5 Hz, 1H), 6.56 (dd, J = 8.2, 2.6 Hz, 1H), 3.02 (dd, J = 5.5, 3.1 Hz, 1H), 2.92 (d, J = 18.3 Hz, 1H), 2.80–2.74 (m, 3H), 2.72–2.61 (m, 3H), 2.13 (td, J = 12.4, 3.2 Hz, 1H), 1.88 (dd, J = 7.0, 3.0 Hz, 1H), 1.81 (td, J = 12.9, 4.7 Hz, 1H), 1.34 (s, 3H), 1.32 (t, J = 2.5 Hz, 1H), 0.87 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 142.2, 139.3, 131.1, 130.3, 127.7, 126.6, 119.4, 112.8, 111.6, 57.4, 56.2, 45.6, 41.4, 41.1, 35.9, 32.7, 24.4, 22.6, 13.1. HRMS (ES+) Calcd. For C22H27BrNO, 400.1276 (M+H)+; found, 400.1271[α]20D –105.5° (c 1.0, CHCl3/MeOH, (9/1)). Anal. Calcd. For C22H27BrClNO • 0.45 C3H8O: C, 60.46; H, 6.65; N, 3.02. Found: C, 60.40; H, 6.58; N, 2.96.
  • (1R,5R,9R)-6,11-Dimethyl-3-(3-bromophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-13). General procedure was used, and the alkylation was achieved with 3-bromophenethyl bromide. The product was obtained as a pale-yellow solid (276 mg, 81%), mp (HCl salt) 255–257 °C (dec). 1H NMR (400 MHz; CD3OD): δ 7.42 (s, 1H), 7.34 (dt, J = 6.5, 2.3 Hz, 1H), 7.21–7.19 (m, 2H), 6.90 (d, J = 8.3 Hz, 1H), 6.69 (d, J = 2.5 Hz, 1H), 6.56 (dd, J = 8.2, 2.5 Hz, 1H), 3.02 (dd, J = 5.5, 3.1 Hz, 1H), 2.92 (d, J = 18.3 Hz, 1H), 2.81–2.75 (m, 3H), 2.72–2.60 (m, 3H), 2.14 (td, J = 12.4, 3.2 Hz, 1H), 1.88 (dd, J = 7.0, 3.0 Hz, 1H), 1.82 (dt, J = 12.9, 6.4 Hz, 1H), 1.34 (s, 3H), 1.32 (t, J = 2.4 Hz, 1H), 0.87 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 142.8, 142.2, 131.3, 129.8, 128.8, 127.7, 127.2, 126.7, 121.9, 112.8, 111.6, 57.4, 56.2, 45.6, 41.4, 41.1, 35.9, 33.0, 24.5, 22.6, 13.1. HRMS (ES+) Calcd. For C22H27NOBr, 400.1276 (M+H)+; found, 400.1277. [α]20D –92.5° (c 1.0, CHCl3/MeOH (9/1)). Anal. Calcd. For C22H27BrClNO: C, 60.49; H, 6.23; N, 3.21. Found: C, 60.67; H, 6.33; N, 3.16.
  • (1R,5R,9R)-6,11-Dimethyl-3-(2-bromophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-14). General procedure was used, and the alkylation was achieved with 2-bromophenethyl bromide. The product was obtained as a pale-yellow solid (200 mg, 59%), mp (HCl salt) 233–235 °C (dec). 1H NMR (400 MHz; CD3OD): δ 7.51 (dd, J = 8.0, 1.0 Hz, 1H), 7.31–7.23 (m, 2H), 7.10–7.06 (m, 1H), 6.86 (d, J = 8.3 Hz, 1H), 6.67 (d, J = 2.5 Hz, 1H), 6.54 (dd, J = 8.2, 2.5 Hz, 1H), 3.05 (dd, J = 5.5, 3.1 Hz, 1H), 3.00–2.87 (m, 3H), 2.76 (dt, J = 11.8, 5.9 Hz, 1H), 2.71 (t, J = 4.7 Hz, 1H), 2.66–2.57 (m, 2H), 2.15 (td, J = 12.4, 3.2 Hz, 1H), 1.89 (qd, J = 7.0, 3.0 Hz, 1H), 1.81 (td, J = 12.9, 4.7 Hz, 1H), 1.32 (s, 3H), 1.30 (t, J = 2.4 Hz, 1H), 0.85 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 142.1, 139.1, 132.4, 130.7, 127.85, 127.71, 127.5, 126.6, 123.8, 112.8, 111.6, 57.5, 54.7, 45.7, 41.3, 40.9, 35.9, 33.6, 24.5, 22.9, 13.1. HRMS (ES+) Calcd. For C22H27BrNO, 400.1276 (M+H)+; found, 400.1278. [α]20D –88.2° (c 0.85, CHCl3/MeOH (9/1)). Anal. Calcd. For C22H27BrClNO • 0.1 H2O • 0.2 C3H8O: C, 60.24; H, 6.44; N, 3.11. Found: C, 60.32; H, 6.37; N, 3.02.
  • (1R,5R,9R)-6,11-Dimethyl-3-(4-chlorophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-15). General procedure was used, and the alkylation was achieved with 4-chlorophenethyl bromide. The product ((−)-15) was obtained as a pale-yellow solid (310 mg, 71%), mp (HCl salt) 300–302 °C (dec). 1H-NMR (400 MHz; CD3OD): δ 7.26–7.23 (m, 2H), 7.21–7.18 (m, 2H), 6.87 (d, J = 8.3 Hz, 1H), 6.67 (d, J = 2.5 Hz, 1H), 6.54 (dd, J = 8.2, 2.5 Hz, 1H), 3.01 (dd, J = 5.6, 3.1 Hz, 1H), 2.91 (d, J = 18.3 Hz, 1H), 2.80–2.72 (m, 3H), 2.68 (dd, J = 9.9, 4.1 Hz, 1H), 2.64–2.62 (m, 1H), 2.61–2.58 (m, 1H), 2.12 (td, J = 12.4, 3.2 Hz, 1H), 1.86 (dd, J = 7.0, 3.0 Hz, 1H), 1.80 (td, J = 12.9, 4.7 Hz, 1H), 1.32 (s, 3H), 1.30 (t, J = 2.5 Hz, 1H), 0.85 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 142.2, 138.8, 131.5, 129.9, 128.0, 127.7, 126.6, 112.8, 111.6, 57.4, 56.3, 45.6, 41.4, 41.1, 35.9, 32.7, 24.5, 22.6, 13.1. HRMS (ES+) Calcd. For C22H27ClNO, 356.1781 (M+H)+; found, 356.1779. [α]20D –105.0° (c 1.0, CHCl3/MeOH (9/1)). Anal. Calcd. For C22H27Cl2NO: C, 67.35; H, 6.94; N, 3.57. Found: C, 67.38; H, 6.69; N, 3.57.
  • (1R,5R,9R)-6,11-Dimethyl-3-(3-chlorophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-16). General procedure was used, and the alkylation was achieved with 3-chlorophenethyl bromide. The product was obtained as a pale-yellow solid (300 mg, 69%), mp (HCl salt) 258–260 °C (dec). 1H NMR (400 MHz; CD3OD): δ 7.26–7.22 (m, 2H), 7.18–7.13 (m, 2H), 6.88 (d, J = 8.3 Hz, 1H), 6.67 (d, J = 2.5 Hz, 1H), 6.54 (dd, J = 8.2, 2.6 Hz, 1H), 3.00 (dd, J = 5.6, 3.1 Hz, 1H), 2.90 (d, J = 18.3 Hz, 1H), 2.80–2.72 (m, 3H), 2.67 (dd, J = 5.5, 1.8 Hz, 1H), 2.65–2.57 (m, 2H), 2.12 (td, J = 12.4, 3.2 Hz, 1H), 1.85 (dt, J = 7.5, 4.0 Hz, 1H), 1.79 (dt, J = 12.9, 6.4 Hz, 1H), 1.32 (s, 3H), 1.30 (dd, J = 2.8, 2.2 Hz, 1H), 0.85 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 142.5, 142.2, 133.7, 129.5, 128.3, 127.7, 126.74, 126.69, 125.8, 112.8, 111.6, 57.4, 56.2, 45.6, 41.5, 41.1, 35.9, 33.1, 24.5, 22.6, 13.1. HRMS (ES+) Calcd. For C22H27NOCl, 356.1781 (M+H)+; found, 356.1785. [α]20D –104° (c 1.1, CHCl3/MeOH (9/1)). Anal. Calcd. For C22H27Cl2NO: C, 67.35; H, 6.94; N, 3.57. Found: C, 67.37; H, 6.72; N, 3.50.
  • (1R,5R,9R)-6,11-Dimethyl-3-(2-chlorophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-17). General procedure was used, and the alkylation was achieved with 2-chlorophenethyl bromide. The product was obtained as a pale-yellow solid (250 mg, 74%), Mp (HCl salt) 249–251 °C (dec). 1H NMR (400 MHz; CD3OD): δ 7.31 (ddd, J = 15.6, 7.6, 1.5 Hz, 2H), 7.23–7.14 (m, 2H), 6.86 (d, J = 8.3 Hz, 1H), 6.67 (d, J = 2.5 Hz, 1H), 6.54 (dd, J = 8.2, 2.5 Hz, 1H), 3.04 (dd, J = 5.4, 3.1 Hz, 1H), 3.00–2.86 (m, 3H), 2.75 (td, J = 11.6, 5.6 Hz, 1H), 2.72–2.58 (m, 3H), 2.14 (td, J = 12.4, 3.2 Hz, 1H), 1.88 (dd, J = 7.0, 3.0 Hz, 1H), 1.81 (td, J = 13.0, 4.7 Hz, 1H), 1.32 (s, 3H), 1.30 (s, 1H), 0.85 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 142.2, 137.4, 133.5, 130.7, 129.1, 127.70, 127.61, 126.9, 126.6, 112.8, 111.6, 57.5, 54.6, 45.7, 41.3, 40.9, 35.9, 31.1, 24.5, 22.8, 13.1. HRMS (ES+) Calcd. For C22H27ClNO, 356.1781 (M+H)+; found, 356.1781. [α]20D –90.6° (c 1.2, CHCl3/MeOH (9/1)). Anal. Calcd. For C22H27Cl2NO • 0.15 H2O • 0.1 C3H8O: C, 66.78; H, 7.06; N, 3.49. Found: C, 66.87; H, 6.97; N, 3.39.
  • (1R,5R,9R)-6,11-Dimethyl-3-(4-methoxyphenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-18). General procedure was used, and the alkylation was achieved with 4-methoxyphenethyl bromide. The product was obtained as a pale-yellow solid (465 mg, 82%), mp (HCl salt) 164–166 °C. 1H-NMR (400 MHz; CD3OD): δ 7.12–7.09 (m, 2H), 6.87 (d, J = 8.3 Hz, 1H), 6.83–6.79 (m, 2H), 6.67 (d, J = 2.5 Hz, 1H), 6.54 (dd, J = 8.2, 2.5 Hz, 1H), 3.73 (s, 3H), 3.03 (dd, J = 5.6, 3.1 Hz, 1H), 2.91 (d, J = 18.3 Hz, 1H), 2.73–2.59 (m, 6H), 2.12 (td, J = 12.4, 3.2 Hz, 1H), 1.87 (dd, J = 7.0, 3.0 Hz, 1H), 1.80 (td, J = 12.9, 4.7 Hz, 1H), 1.33 (s, 3H), 1.30 (t, J = 2.4 Hz, 1H), 0.85 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 158.2, 155.4, 142.1, 131.8, 129.1, 127.7, 126.6, 113.5, 112.8, 111.6, 57.3, 56.8, 54.2, 45.7, 41.3, 41.0, 35.9, 32.4, 24.4, 22.5, 13.1. HRMS (ES+) Calcd. For C23H30NO2, 352.2277 (M+H)+; found, 352.2278. [α]20D –109.0° (c 1.0, CHCl3/MeOH (9/1)). Anal. Calcd. For C23H30ClNO2 • 0.5 H2O: C, 69.59; H, 7.87; N, 3.53. Found: C, 69.88; H, 8.22; N, 3.23.
  • (1R,5R,9R)-6,11-Dimethyl-3-(4-methylphenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-19). General procedure was used, and the alkylation was achieved with 4-methylphenethyl bromide. The product was obtained as a pale-yellow solid (460 mg, 72%), mp (HCl salt) 305–306 °C (dec). 1H-NMR (400 MHz; CD3OD): δ 7.09 (s, 4H), 6.89 (d, J = 8.3 Hz, 1H), 6.69 (d, J = 2.5 Hz, 1H), 6.56 (dd, J = 8.2, 2.6 Hz, 1H), 3.05 (dd, J = 5.7, 3.1 Hz, 1H), 2.93 (d, J = 18.3 Hz, 1H), 2.79–2.60 (m, 6H), 2.28 (s, 3H), 2.13 (td, J = 12.4, 3.3 Hz, 1H), 1.90 (td, J = 6.9, 2.9 Hz, 1H), 1.82 (td, J = 12.9, 4.7 Hz, 1H), 1.35 (s, 3H), 1.32 (t, J = 2.5 Hz, 1H), 0.87 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 156.9, 143.7, 138.3, 136.8, 130.1, 129.6, 129.2, 128.1, 114.3, 113.1, 58.7, 58.2, 47.2, 42.9, 42.5, 37.4, 34.4, 26.0, 24.0, 21.1, 14.6. HRMS (ES+) Calcd. For C23H30NO, 336.2327 (M+H)+; found, 336.2324. [α]20D –110.8° (c 1.0, CHCl3/MeOH (9/1)). Anal. Calcd. For C23H30ClNO • 0.05 H2O: C, 74.09; H, 8.14; N, 3.76. Found: C, 74.10; H, 8.18; N, 3.74.
  • (1R,5R,9R)-6,11-Dimethyl-3-(4-hydroxyphenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-20). General procedure was used, and the alkylation was achieved with 4-hydroxyphenethyl bromide. The product was obtained as a pale-yellow solid (170 mg, 52%), mp (HCl salt) 300–302 °C (dec). 1H NMR (400 MHz; CD3OD): δ 7.03–6.99 (m, 2H), 6.88 (d, J = 8.3 Hz, 1H), 6.70–6.66 (m, 3H), 6.54 (dd, J = 8.2, 2.5 Hz, 1H), 3.03 (dd, J = 5.5, 3.0 Hz, 1H), 2.96–2.83 (m, 2H), 2.73–2.59 (m, 6H), 2.11 (td, J = 12.4, 3.2 Hz, 1H), 1.87 (dt, J = 7.0, 3.5 Hz, 1H), 1.80 (td, J = 12.9, 4.7 Hz, 1H), 1.32 (s, 3H), 1.30 (d, J = 2.0 Hz, 1H), 0.85 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.40, 155.35, 142.1, 130.5, 129.1, 127.7, 126.6, 114.8, 112.8, 111.6, 57.2, 56.9, 45.7, 41.3, 40.9, 35.9, 32.4, 24.4, 22.4, 13.1. HRMS (ES+) Calcd. For C22H28NO2, 338.2120 (M+H)+; found, 338.2122. [α]20D –120° (c 1.0, CHCl3/MeOH (9/1Anal. Calcd. For C22H28ClNO2 • 0.05 H2O • 0.2 C3H8O: C, 70.17; H, 7.74; N, 3.62. Found: C, 70.24; H, 7.83; N, 3.70.
  • (1R,5R,9R)-6,11-Dimethyl-3-(2,4-dichlorophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-21). General procedure was used, and the alkylation was achieved with 2,4-dichlorophenethyl bromide. The product was obtained as a pale-yellow solid (220 mg, 61%), Mp (HCl salt) 240–241 °C. 1H NMR (400 MHz; CD3OD): δ 7.39 (d, J = 2.1 Hz, 1H), 7.28 (d, J = 8.3 Hz, 1H), 7.23 (dd, J = 8.2, 2.1 Hz, 1H), 6.86 (d, J = 8.3 Hz, 1H), 6.67 (d, J = 2.5 Hz, 1H), 6.54 (dd, J = 8.2, 2.5 Hz, 1H), 3.01 (dt, J = 5.6, 2.8 Hz, 1H), 2.96–2.89 (m, 2H), 2.87–2.83 (m, 1H), 2.77–2.71 (m, 1H), 2.68 (t, J = 9.3 Hz, 1H), 2.63–2.56 (m, 2H), 2.13 (td, J = 12.4, 3.2 Hz, 1H), 1.87 (tt, J = 7.0, 3.5 Hz, 1H), 1.79 (td, J = 12.9, 4.7 Hz, 1H), 1.32 (s, 3H), 1.29–1.25 (m, 1H), 0.84 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 142.2, 136.4, 134.3, 132.4, 131.8, 128.6, 127.7, 127.0, 126.6, 112.8, 111.6, 57.6, 54.3, 45.6, 41.4, 41.0, 35.9, 30.6, 24.5, 22.9, 13.1. HRMS (ES+) Calcd. For C22H26Cl2NO, (M+H)+ 390.1391; found, 390.1387. [α]20D –95.6° (c 1.1, CHCl3/MeOH (9/1)). Anal. Calcd. For C22H26Cl3NO • 0.55 H2O: C, 61.56; H, 6.09; N, 3.12. Found: C, 61.59; H, 6.17; N, 3.03.
  • (1R,5R,9R)-6,11-Dimethyl-3-(2,6-dichlorophenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-22). General procedure was used, and the alkylation was achieved with 2,6-dichlorophenethyl bromide. The product was obtained as a pale-yellow solid (245 mg, 66%), mp (HCl salt) 241–243 °C. 1H NMR (400 MHz; CD3OD): δ 7.34 (d, J = 8.0 Hz, 2H), 7.17 (t, J = 8.1 Hz, 1H), 6.86 (d, J = 8.3 Hz, 1H), 6.67 (d, J = 2.5 Hz, 1H), 6.54 (dd, J = 8.2, 2.5 Hz, 1H), 3.21–3.13 (m, 2H), 3.10 (t, J = 4.5 Hz, 1H), 2.93 (d, J = 18.4 Hz, 1H), 2.73 (dtd, J = 17.4, 11.5, 5.4 Hz, 3H), 2.59 (td, J = 11.9, 5.1 Hz, 1H), 2.19 (td, J = 12.4, 3.1 Hz, 1H), 1.93–1.87 (m, 1H), 1.83 (dt, J = 12.9, 6.5 Hz, 1H), 1.34–1.31 (m, 4H), 0.86 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 142.1, 135.18, 135.07, 128.26, 128.08, 127.7, 126.4, 112.8, 111.6, 57.7, 52.2, 45.8, 41.2, 40.7, 35.8, 28.8, 24.4, 23.0, 13.1. HRMS (ES+) Calcd. For C22H26Cl2NO, (M+H)+ 390.1391; found, 390.1389. [α]20D –89.1° (c 1.1, CHCl3/MeOH (9/1)). Anal. Calcd. For C22H26Cl3NO • 0.4 H2O • 0.2 C3H8O: C, 60.86; H, 6.42; N, 3.14. Found: C, 60.92; H, 6.35; N, 3.07.
  • (1R,5R,9R)-6,11-Dimethyl-3-(phenethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-23). General procedure was used, and the alkylation was achieved with phenethyl bromide. The product was obtained as a pale-yellow solid (244 mg, 64%), mp (HCl salt) 277–280 °C (dec). 1H NMR (400 MHz; CD3OD): δ 7.27–7.19 (m, 4H), 7.18–7.14 (m, 1H), 6.88 (d, J = 8.3 Hz, 1H), 6.67 (d, J = 2.5 Hz, 1H), 6.55 (dd, J = 8.2, 2.5 Hz, 1H), 3.07 (dd, J = 5.5, 3.1 Hz, 1H), 2.97–2.90 (m, 1H), 2.83–2.76 (m, 3H), 2.73–2.63 (m, 3H), 2.15 (td, J = 12.5, 3.2 Hz, 1H), 1.88 (ddd, J = 6.4, 5.8, 4.4 Hz, 1H), 1.81 (dt, J = 13.0, 6.5 Hz, 1H), 1.33 (s, 3H), 1.31 (d, J = 2.8 Hz, 1H), 0.86 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 142.1, 139.8, 128.24, 128.05, 127.7, 126.5, 125.8, 112.8, 111.6, 57.4, 56.5, 45.7, 41.2, 40.9, 35.8, 33.3, 24.4, 22.5, 13.0. HRMS (ES+) Calcd. For C22H28NO, 322.2171 (M+H)+; found, 322.2170. [α]20D –101.5° (c 1.1, CHCl3/MeOH (9/1)). Anal. Calcd. For C22H28ClNO • 0.05 H2O: C, 73.64; H, 7.89; N, 3.90. Found: C, 73.67; H, 7.79; N, 3.83.
  • (1R,5R,9R)-6,11-Dimethyl-3-(phenylpropyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-24). General procedure was used, and the alkylation was achieved with phenylpropyl bromide. The product (−)-24 was obtained as a pale-yellow solid (255 mg, 80%), mp (HCl salt) 209–211 °C. 1H NMR (400 MHz; CD3OD): δ 7.26–7.22 (m, 2H), 7.19–7.12 (m, 3H), 6.87 (d, J = 8.3 Hz, 1H), 6.67 (d, J = 2.5 Hz, 1H), 6.55 (dd, J = 8.3, 2.5 Hz, 1H), 3.06 (dd, J = 5.5, 3.1 Hz, 1H), 2.87 (d, J = 18.5 Hz, 1H), 2.72–2.56 (m, 6H), 2.15 (td, J = 12.6, 3.3 Hz, 1H), 1.90–1.75 (m, 4H), 1.34–1.31 (m, 4H), 0.84 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.6, 141.8, 141.5, 128.0, 127.8, 125.9, 125.6, 113.0, 111.6, 57.4, 53.7, 45.8, 40.8, 40.5, 35.7, 33.2, 28.1, 24.3, 22.5, 12.9. HRMS (ES+) Calcd. For C23H30NO, (M+H)+ 336.2327; found, 336.2329. [α]20D –73.1° (c 1.1, CHCl3/MeOH (9/1)). Anal. Calcd. For C23H30ClNO • 0.2 H2O: C, 73.56; H, 8.16; N, 3.73. Found: C, 73.57; H, 8.02; N, 3.64.
  • (1R,5R,9R)-6,11-Dimethyl-3-(cinnamyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-25). General procedure was used, and the alkylation was achieved with cinnamyl bromide. The product (−)-25 was obtained as an off-white foam (200 mg, 66%), mp (HCl salt) 162–164 °C. 1H NMR (400 MHz; CD3OD): δ 7.39–7.37 (m, 2H), 7.29–7.25 (m, 2H), 7.21–7.17 (m, 1H), 6.91 (d, J = 8.3 Hz, 1H), 6.67 (d, J = 2.5 Hz, 1H), 6.60–6.55 (m, 2H), 6.26 (dt, J = 15.8, 7.0 Hz, 1H), 3.37 (ddd, J = 13.4, 7.1, 1.0 Hz, 1H), 3.01–2.95 (m, 2H), 2.65 (dd, J = 18.4, 6.0 Hz, 1H), 2.59–2.55 (m, 1H), 2.12 (td, J = 12.5, 3.2 Hz, 1H), 1.88 (dd, J = 7.0, 3.1 Hz, 1H), 1.79 (td, J = 12.9, 4.7 Hz, 1H), 1.32 (s, 3H), 1.30 (t, J = 2.5 Hz, 1H), 0.83 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 142.2, 136.8, 133.4, 128.2, 127.7, 127.2, 126.6, 125.9, 125.4, 112.8, 111.6, 57.2, 56.8, 45.4, 41.3, 41.0, 35.9, 24.5, 22.5, 13.1. HRMS (ES+) Calcd. For C23H28NO, (M+H)+ 334.2171; found, 334.2171. [α]20D –118.3° (c 1.1, CHCl3/MeOH (9/1)). Anal. Calcd. For C23H28ClNO • 0.5 H2O: C, 72.9; H, 7.71; N, 3.70. Found: C, 73.00; H, 7.52; N, 3.48.
  • (1R,5R,9R)-3-(2-(1H-Indol-3-yl)ethyl)-6,11-dimethyl-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-26). General procedure was used, and the alkylation was achieved with 3-(2-bromoethyl)-1H-indole. The product was obtained as a pale-yellow solid (250 mg, 80%), mp 115–118 °C. 1H NMR (400 MHz; CD3OD): δ 7.52 (d, J = 7.8 Hz, 1H), 7.30 (d, J = 8.1 Hz, 1H), 7.08–7.04 (m, 2H), 6.98 (td, J = 7.5, 0.8 Hz, 1H), 6.87 (d, J = 8.3 Hz, 1H), 6.68 (d, J = 2.5 Hz, 1H), 6.55 (dd, J = 8.2, 2.5 Hz, 1H), 3.13 (dd, J = 5.5, 3.0 Hz, 1H), 2.98–2.92 (m, 3H), 2.90–2.85 (m, 1H), 2.81 (dd, J = 10.7, 4.6 Hz, 1H), 2.71–2.65 (m, 2H), 2.19–2.13 (m, 1H), 1.92 (dd, J = 7.0, 3.0 Hz, 1H), 1.85 (dt, J = 13.0, 6.5 Hz, 1H), 1.35–1.32 (m, 4H), 0.87 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 142.1, 136.7, 127.7, 127.2, 126.5, 121.6, 120.9, 118.1, 117.7, 112.8, 112.3, 111.6, 110.8, 57.2, 55.4, 45.8, 41.2, 40.9, 35.9, 24.4, 22.63, 22.50, 13.1. HRMS (ES+) Calcd. For C24H29N2O, (M+H)+ 361.2280; found, 361.2285. [α]20D –78.5° (c 1.0, CHCl3/MeOH (9/1)). Anal. Calcd. For C24H28N2O • 0.7 H2O • 0.25 CHCl3: C, 72.28; H, 7.42; N, 6.95. Found: C, 72.37; H, 7.51; N, 6.80.
  • 1-((1R,5R,9R)-8-Hydroxy-6,11-dimethyl-1,4,5,6-tetrahydro-2,6-methanobenzo[d]azocin-3(2H)-yl)-2-(1-methylpiperidin-4-yl)ethan-1-one (−)-27). To a stirred solution of 2-(1-methylpiperidin-4-yl)acetic acid (219 mg, 1.05 equiv, 1.39 mmol), N,N-diisopropylethylamine (685 mg, 923 µL, 4 equiv, 5.30 mmol) and (−)-2•bromocamphorsulfonate (700 mg, 1 equiv, 1.32 mmol) in DMF at 0 °C, HATU (529 mg, 1.05 equiv, 1.39 mmol) was added. The reaction was stirred for 16 h. The reaction was diluted with water, and saturated NaHCO3 was added to it to adjust the pH to ~8.5. The aqueous solution was extracted with CHCl3/MeOH (9/1). The organic extractions were combined and washed with H2O (3 × 20 mL) to remove DMF. The organic extractions were then washed with brine (2 × 20 mL). The organic layer was dried over anhydrous Na2SO4, filtered, and the solvent was removed in vacuo. The crude residue was purified by flash chromatography (2–25% CMA in CHCl3) to give (−)-27 as an off-white foam (400 mg, 97%). 1H NMR (400 MHz; CD3OD): δ 6.87 (d, J = 8.3 Hz, 1H), 6.66 (d, J = 2.5 Hz, 1H), 6.54 (dd, J = 8.2, 2.5 Hz, 1H), 2.96 (dd, J = 5.6, 3.0 Hz, 1H), 2.91–2.83 (m, 3H), 2.67–2.47 (m, 4H), 2.24 (s, 3H), 2.08 (td, J = 12.5, 3.2 Hz, 1H), 2.00 (t, J = 11.0 Hz, 2H), 1.84 (qd, J = 7.5, 3.2 Hz, 1H), 1.74 (ddd, J = 15.4, 11.3, 3.9 Hz, 3H), 1.45 (dd, J = 10.2, 5.7 Hz, 2H), 1.31–1.26 (m, 7H), 0.84 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 142.1, 127.7, 126.5, 112.8, 111.6, 57.0, 55.2, 52.0, 45.7, 44.9, 41.3, 40.9, 35.9, 33.5, 33.1, 31.64, 31.56, 24.4, 22.3, 13.1. HRMS (ES+) Calcd. For C22H33N2O2, (M+H)+ 357.2542; found, 357.2539.
  • (1R,5R,9R)-6,11-Dimethyl-3-(2-(1-methylpiperidin-4-yl)ethyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-28). Amide (−)-27 (0.307 g, 1 equiv, 861 µmol) was dissolved in THF (7 mL). To this, a freshly prepared borane solution (2.58 mL, 4 molar, 12 equiv, 10.03 mmol) was added. The solution was heated at 60 °C for 24 h. The reaction was quenched with anhydrous MeOH at 0 °C and stirred for 30 min. The solvent was removed in vacuo and then redissolved in MeOH and acidified with 2N HCl. The mixture was refluxed for 4 h. The reaction was cooled to room temperature and then basified with NH4OH solution to pH 9. The aqueous solution was extracted with CHCl3: MeOH (9:1). The organic layers were washed with brine and dried over anhydrous Na2SO4, filtered, and solvent removed in vacuo to give (−)-28 as a white solid (170 mg, 58%), mp (HCl salt) 309–310 °C (dec). 1H NMR (400 MHz; CD3OD): δ 6.87 (d, J = 8.3 Hz, 1H), 6.66 (d, J = 2.5 Hz, 1H), 6.54 (dd, J = 8.2, 2.5 Hz, 1H), 2.96 (dd, J = 5.6, 3.0 Hz, 1H), 2.91–2.83 (m, 3H), 2.67–2.47 (m, 4H), 2.24 (s, 3H), 2.08 (td, J = 12.5, 3.2 Hz, 1H), 2.00 (t, J = 11.0 Hz, 2H), 1.84 (qd, J = 7.5, 3.2 Hz, 1H), 1.74 (ddd, J = 15.4, 11.3, 3.9 Hz, 3H), 1.45 (dd, J = 10.2, 5.7 Hz, 2H), 1.31–1.26 (m, 7H), 0.84 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 142.1, 127.7, 126.5, 112.8, 111.6, 57.0, 55.2, 52.0, 45.7, 44.9, 41.3, 40.9, 35.9, 33.5, 33.1, 31.64, 31.56, 24.4, 22.3, 13.1. HRMS (ES+) Calcd. For C22H35N2O, (M+H)+ 343.2749; found, 343.2746. [α]20D –87.5° (c 1.1, CHCl3/MeOH (9/1)). Anal. Calcd. For C22H36Cl2N2O • 0.2 C3H8O • 1.15 H2O: C, 60.57; H, 8.97; N, 6.25. Found: C, 60.57; H, 8.99; N, 6.26.
  • (1R,5R,9R)-6,11-Dimethyl-3-(3-(4-nitrophenyl)propyl)-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol ((−)-31). General procedure was used, and the alkylation was achieved with 30 as the alkylating agent (obtained from 3-(4-nitrophenyl)propan-1-ol, 29). The product (−)-31 was obtained as a pale-yellow solid (252 mg, 70%), mp (HCl salt) 265–266 °C (dec). 1H NMR (400 MHz; CD3OD): δ 8.15–8.11 (m, 2H), 7.46–7.42 (m, 2H), 6.85 (d, J = 8.3 Hz, 1H), 6.65 (d, J = 2.5 Hz, 1H), 6.53 (dd, J = 8.2, 2.6 Hz, 1H), 2.92 (dd, J = 5.6, 3.1 Hz, 1H), 2.85 (d, J = 18.3 Hz, 1H), 2.76 (t, J = 7.6 Hz, 2H), 2.65–2.45 (m, 4H), 2.06 (td, J = 12.4, 3.2 Hz, 1H), 1.90–1.80 (m, 3H), 1.76 (td, J = 12.9, 4.7 Hz, 1H), 1.30 (s, 3H), 1.27 (t, J = 2.5 Hz, 1H), 0.82 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; CD3OD): δ 155.4, 150.2, 146.3, 142.2, 129.11, 129.06, 127.6, 126.6, 123.1, 112.7, 111.6, 57.2, 53.7, 45.6, 41.4, 41.0, 35.9, 33.1, 28.0, 24.5, 22.5, 13.1. HRMS (ES+) Calcd. For C23H29N2O3, (M+H)+ 381.2178; found, 381.2174. [α]20D –77.5° (c 1.1, CHCl3/MeOH (9/1)). Anal. Calcd. For C23H29ClN2O3  0.05 H2O: C, 66.11; H, 7.02; N, 6.70. Found: C, 65.97; H, 6.75; N, 6.62.
  • 3-(4-Nitrophenyl)propyl methanesulfonate (30). 3-(4-Nitrophenyl)propan-1-ol (510 mg, 1 equiv, 2.81 mmol) was dissolved in anhydrous dichloromethane (15 mL) and cooled to 0 °C. Triethylamine (427 mg, 588 µL, 1.5 equiv, 4.22 mmol) and methanesulfonyl chloride (355 mg, 241 µL, 1.1 equiv, 3.10 mmol) were added to it, and the reaction was stirred at 0 °C for 1 h. The reaction was diluted with water and extracted with dichloromethane (15 mL). The organic layer was washed with saturated NaHCO3 (15 mL) and brine (15 mL) and dried over anhydrous Na2SO4. The organic layer was filtered, and the solvent was removed in vacuo to give a pale-yellow oil. The crude product was purified by flash chromatography (0–80% EtOAc/hexanes) to give 30 as a pale-yellow oil that solidified on standing (700 mg, 96%). 1HNMR (400 MHz; CD3OD): δ 8.16–8.13 (m, 2H), 7.47–7.44 (m, 2H), 4.24 (t, J = 6.2 Hz, 2H), 3.05 (s, 3H), 2.86 (t, J = 7.7 Hz, 2H), 2.11–2.04 (m, 2H). 13C NMR (101 MHz; CD3OD): δ 148.9, 146.5, 129.2, 123.2, 69.1, 35.6, 31.0, 30.0. HRMS (ES+) Calcd. For C10H13NO5S, (M+Na)+ 282.0412; found, 282.0413.
  • rac-8-Methoxy-6,11-dimethyl-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocine (32) [29]. 6,11-Dimethyl-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol (rac-normetazocine, (rac-1), 10 g, 1 equiv, 46 mmol) and potassium carbonate (13 g, 2 equiv, 92 mmol) were added to H2O (0.15 L), and the mixture was cooled to 0 °C for 20 min. In a separate Erlenmeyer flask, di-tert-butyl dicarbonate (10 g, 11 mL, 1 equiv, 46 mmol) was dissolved in 1,4-dioxane (75 mL). This solution was added to the aqueous mixture, and the reaction was warmed at 23 °C over the course of 18 h. The organic products were extracted with CHCl3 3x, and the organic solution was washed with 1M HCl and brine. The combined organic phase was dried over sodium sulfate and concentrated in vacuo to provide tert-butyl 8-hydroxy-6,11-dimethyl-1,4,5,6-tetrahydro-2,6-methanobenzo[d]azocine-3(2H)-carboxylate (15 g, 47 mmol, 100%) as a yellow/orange oil. The tert-butyl compound, as a crude oil (15 g, 1 equiv, 46 mmol), was dissolved in 2N NaOH (94 mL) and cooled to 0 °C for 20 min. Dimethyl sulfate (5.8 g, 4.4 mL, 1 equiv, 46 mmol) was added, and the mixture kept at 23 °C for 4 h. Diethyl ether was added to dilute the reaction, and the aqueous phase extracted 3x with diethyl ether. The combined organic phase was washed with brine and concentrated in vacuo to a white foam. The foam was dissolved in 1M HCl (0.11 L) and methanol (0.11 L) and kept at 50 °C until TLC showed full conversion. Volatiles and H2O were removed in vacuo to provide rac-normetazocine methyl ether 32 (7.65 g, 33.1 mmol, 72%) as a foam. 1H-NMR (400 MHz; CDCl3): δ 7.06 (d, J = 8.4 Hz, 1H), 6.80 (d, J = 2.6 Hz, 1H), 6.76 (dd, J = 8.4, 2.6 Hz, 1H), 3.79 (s, 3H), 3.23–3.05 (m, 3H), 2.74 (td, J = 13.3, 3.6 Hz, 1H), 2.15 (dd, J = 7.0, 3.1 Hz, 1H), 1.99 (dd, J = 13.7, 4.7 Hz, 1H), 1.51 (dd, J = 14.0, 2.0 Hz, 1H), 1.42 (s, 3H), 0.88 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz; cdcl3): δ 158.8, 140.4, 128.7, 125.0, 111.9, 111.5, 55.2, 52.2, 38.6, 37.71, 37.54, 35.5, 27.1, 24.8, 13.1. The NMR spectra corresponded to those in the literature [29].
  • rac-8-Methoxy-6,11-dimethyl-3,4,5,6-tetrahydro-2,6-methanobenzo[d]azocin-1(2H)-one (33). In an argon-charged flame-dried flask, CrO3 (7.5 g, 1.5 equiv, 74.6 mmol) was dissolved in 10:1 H2O: H2SO4, 330 mL. To this, the methyl ether 32 (13 g, 1 equiv, 57.4 mmol) in 330 mL of 10:1 H2O: H2SO4, was added rapidly, and the mixture was refluxed for 5 h. The mixture was cooled and basified with NH4OH to pH 9. The chromium precipitate (grey solid) was filtered off. The filtrate was extracted 2x with EtOAc. The organic phase was washed with brine, dried, and concentrated in vacuo. The residue was purified via flash chromatography with CMA (50:45:5) to provide 8.9 g (63% yield) of the ketone 33 as a yellow syrup. 1H-NMR (400 MHz; CDCl3): δ 8.05 (d, J = 8.7 Hz, 1H), 6.87 (dd, J = 8.7, 2.5 Hz, 1H), 6.81 (d, J = 2.5 Hz, 1H), 3.89 (d, J = 6.1 Hz, 3H), 3.28 (d, J = 2.8 Hz, 1H), 2.75 (ddd, J = 12.0, 5.3, 1.8 Hz, 1H), 2.60 (td, J = 12.4, 3.3 Hz, 1H), 2.18–2.08 (m, 2H), 1.92 (td, J = 12.9, 5.3 Hz, 1H), 1.49 (ddd, J = 13.0, 3.2, 1.9 Hz, 1H), 1.44 (s, 3H), 0.87 (d, J = 7.1 Hz, 3H). 13C NMR (101 MHz; CDCl3): δ 198.8, 164.8, 149.4, 128.1, 127.6, 112.0, 111.6, 63.2, 55.3, 43.6, 40.8, 39.2, 37.8, 25.9, 14.2, 13.7. HRMS: [C15H19NO2]H+ Calcd: 246.1494; Found: 246.1490. NMR spectra corresponded to those in the literature [29].
  • rac-8-Methoxy-6,11-dimethyl-3-phenethyl-3,4,5,6-tetrahydro-2,6-methanobenzo[d]azocin-1(2H)-one (rac-34). In a flame-dried flask, the C8-ketone 33 (8.9 g, 1 equiv, 36 mmol), (2-bromoethyl) benzene (20 g, 15 mL, 3 equiv, 0.11 mol), and potassium carbonate (20 g, 4 equiv, 0.15 mol) were added to acetonitrile (120 mL). The mixture was heated at 80 °C for 18 h. The reaction mixture was filtered through celite to remove the remaining potassium carbonate. The filtrate was concentrated in vacuo, and the residual material was purified by flash chromatography using 30% ethyl acetate in hexanes. The N-phenethyl compound rac-34 (10.2 g, 29.2 mmol, 80%) was isolated as a light brown oil. The oil was concentrated overnight in vacuo to give a light-yellow solid. 1H-NMR (400 MHz; CDCl3): δ 7.99 (d, J = 8.7 Hz, 1H), 7.25–7.20 (m, 4H), 7.15 (s, 1H), 6.82 (dd, J = 8.7, 2.5 Hz, 1H), 6.77 (d, J = 2.5 Hz, 1H), 3.84 (d, J = 5.0 Hz, 3H), 3.23 (d, J = 2.8 Hz, 1H), 3.01–2.94 (m, 1H), 2.80–2.73 (m, 3H), 2.56–2.49 (m, 1H), 2.10 (d, J = 10.0 Hz, 3H), 1.40 (s, 3H), 0.87 (d, J = 7.1 Hz, 3H). 13C NMR (101 MHz; CDCl3): δ 194.9, 164.7, 149.1, 140.4, 128.8, 128.2, 127.95, 127.83, 125.9, 111.9, 67.4, 57.1, 55.4, 46.3, 44.1, 41.6, 37.5, 34.0, 25.6, 13.7. NMR spectra agreed with those in the literature [29].
Optimized optical resolution of rac-8-methoxy-6,11-dimethyl-3-phenethyl-3,4,5,6-tetrahydro-2,6-methanobenzo[d]azocin-1(2H)-one (rac-34) to obtain 2S,6R,11R-(−)-34 and 2R,6S,11S-(+)-34 (1S,5R,9R-(−)-34 and 1R,5S,9S-(+)-34 in benzomorphan nomenclature). The N-phenethyl compound rac-34 (3.14 g, 2 equiv, 8.99 mmol) as an orange oil was dissolved in acetone (4 mL). In a separate Erlenmeyer flask, L-tartaric acid (1.35 g, 2 equiv, 8.99 mmol) was dissolved in N,N-dimethylformamide (3 mL) with stirring and heating to 80 °C, and the acetone solution of rac-34 was added. The combined solution was allowed to cool to 0 °C, and crystallization occurred after scratching the solution with a glass rod, providing a white crystalline tartrate salt of (−)-34 (1.33 g), mp. 197–199 °C; [α]25D = −48.6° (c 0.44, MeOH). The salt was collected via filtration and free-based with concentrated NH4OH. The free base was extracted with CHCl3, and the aqueous phase was extracted 2x with CHCl3. The combined organic phases were washed 2x with saturated Na2CO3. After drying over Na2SO4 and solvent removal in vacuo, (−)-34 (1.05 g, 3.00 mmol, 67%) was obtained as a yellow oil (see Figure 1 for IUPAC numbering of benzomorphans), [α]25D –41.3° (c 1.08, MeOH). 1HNMR (400 MHz; C6H6): δ 8.34 (d, J = 8.7 Hz, 1H), 7.21 (dd, J = 16.8, 7.4 Hz, 15H), 7.08 (t, J = 7.1 Hz, 1H), 6.74 (s, 1H), 6.50 (dd, J = 8.6, 1.5 Hz, 1H), 3.34 (s, 1H), 3.21 (s, 3H), 3.16–3.01 (m, 2H), 2.84–2.77 (m, 1H), 2.65 (ddd, J = 12.2, 9.1, 5.5 Hz, 1H), 2.53–2.49 (m, 1H), 2.17–2.10 (m, 1H), 1.94–1.90 (m, 1H), 1.79–1.71 (m, 1H), 1.24–1.21 (m, 1H), 1.08 (s, 3H), 0.74 (d, J = 7.1 Hz, 3H). HRMS: [C23H27NO2]H+ Calculated: 350.2120; Found: 350.2123. The mother liquor after isolation of (−)-34 was free-based with ammonia water and extracted 3x with CHCl3. After drying and removal of solvent in vacuo, 2.1 g of rac-34 base was collected and dissolved in 3 mL of acetone. D-tartaric acid (0.9 g) was dissolved in 2 mL of DMF and added to the acetone solution. Crystallization was achieved using the same procedure as with (−)-34 to give the D-tartrate salt of (+)-34 as a solid, mp 197–199 °C, [α]25D = +46.9° (c 0.48, MeOH). After conversion to the free base, (+)-34 was isolated as a yellow oil, [α]25D +44.4° (c 1.65, MeOH). 1H-NMR (400 MHz; C6H6): δ 8.27 (d, J = 8.6 Hz, 1H), 7.18–7.10 (m, 8H), 7.04–7.01 (m, 1H), 6.68 (s, 1H), 6.45 (dd, J = 8.7, 1.2 Hz, 1H), 6.11 (s, 1H), 3.28 (d, J = 2.1 Hz, 1H), 3.15 (s, 3H), 3.10–2.95 (m, 2H), 2.74 (ddd, J = 13.3, 8.5, 5.3 Hz, 1H), 2.59 (ddd, J = 12.1, 9.0, 5.6 Hz, 1H), 2.45 (dd, J = 11.9, 4.9 Hz, 1H), 2.08 (td, J = 12.4, 3.0 Hz, 1H), 1.89–1.84 (m, 1H), 1.69 (td, J = 12.8, 5.1 Hz, 1H), 1.17 (d, J = 12.7 Hz, 1H), 1.02 (s, 3H), 0.68 (d, J = 7.1 Hz, 3H). 13C NMR (101 MHz; C6D6): δ 193.6, 164.5, 148.6, 140.7, 128.8, 128.5, 128.2, 127.8, 127.51, 127.39, 125.8, 112.2, 111.1, 67.3, 56.9, 54.4, 46.2, 43.9, 41.6, 37.2, 34.0, 25.1, 13.3. HRMS: [C23H27NO2]H+ Calcd: 350.2120; Found: 350.2118. The absolute configuration of (+)-34 was established as 2R,6S,11S by X-ray crystallographic analysis of the HBr salt (Figure 3). Anal. Calcd. For C23H28BrNO2 • 0.8 H2O • 0.25 CH4O: C 61.67; H 6.81; N 3.09. Found C 61.71; H 6.69; N 2.97.
  • (2R,6S,11S)-8-Methoxy-6,11-dimethyl-3-phenethyl-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-1-ol ((2R,6S,11S)-(+)-35). In a flame-dried flask, (+)-34 (0.580 g, 1 equiv, 1.66 mmol) was dissolved in THF (10 mL) and cooled to 0 °C. Lithium aluminum hydride (75.6 mg, 1.2 equiv, 1.99 mmol) was added, and the reaction was allowed to warm slowly to room temperature. The reaction was quenched successively with iPrOH, MeOH and water, followed by dilution with CHCl3. The heterogeneous mixture was diluted further with brine and extracted 3x with CHCl3. The combined organic phases were washed with ammonium chloride, dried, and the concentrated residue was purified by flash chromatography. The alcohol (+)-35 (0.508 g, 1.45 mmol, 87.1%) was isolated as a colorless oil, and only a single diastereomer was observed in the NMR. The optical rotation was essentially the same as that determined for (−)-35, except for the sign of rotation, as expected for an enantiomeric pair. [α]25D = +52.3° (c, 2.8, MeOH). 1H-NMR (400 MHz; CDCl3): δ 7.47 (d, J = 8.5 Hz, 1H), 7.29 (t, J = 7.3 Hz, 2H), 7.22–7.18 (m, 3H), 6.80 (dd, J = 8.5, 2.6 Hz, 1H), 6.69 (d, J = 2.6 Hz, 1H), 4.62 (d, J = 6.5 Hz, 1H), 3.14–3.08 (m, 1H), 2.93–2.86 (m, 2H), 2.78 (t, J = 7.2 Hz, 2H), 2.49 (dd, J = 9.9, 2.5 Hz, 2H), 2.08–2.02 (m, 1H), 1.83–1.76 (m, 1H), 1.32 (s, 3H), 1.01 (dt, J = 13.0, 2.4 Hz, 1H), 0.82 (d, J = 7.1 Hz, 3H). 13C-NMR (101 MHz, CDCl3): δ 158.86, 141.26, 140.04, 132.89, 128.70, 128.38, 126.09, 111.22, 110.89, 63.80, 62.96, 55.98, 55.11, 43.61, 37.61, 37.54, 37.19, 35.95, 25.98, 13.03. HRMS [C23H29NO2]H+ Calcd: 352.2277; Found: 352.2277.
  • (2S,6R,11R)-8-Methoxy-6,11-dimethyl-3-phenethyl-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-1-ol (2S,6R,11R-(−)-35). In a flame-dried flask, (−)-34 (0.550 g, 1 equiv, 1.57 mmol) was dissolved in THF (10 mL) and cooled to 0 °C. Lithium aluminum hydride (71.7 mg, 1.2 equiv, 1.89 mmol) was added, and the reaction was allowed to warm slowly to room temperature. The reaction was quenched successively with iPrOH, MeOH and H2O, followed by addition of CHCl3. Brine was added to the heterogeneous mixture, and it was extracted 3x with CHCl3. The combined organic phases were washed with NH4OH, dried, and purified by flash chromatography. The alcohol (−)-35 (0.398 g, 1.13 mmol, 71.9%) was isolated as a colorless oil, [α]25D –51.7° (c, 2.08, MeOH). 1H-NMR (400 MHz; CDCl3): δ 7.47 (d, J = 8.5 Hz, 1H), 7.29 (t, J = 7.3 Hz, 2H), 7.22–7.18 (m, 3H), 6.80 (dd, J = 8.5, 2.6 Hz, 1H), 6.69 (d, J = 2.6 Hz, 1H), 4.62 (d, J = 6.5 Hz, 1H), 3.11 (dt, J = 13.0, 6.6 Hz, 1H), 2.93–2.86 (m, 2H), 2.78 (t, J = 7.2 Hz, 2H), 2.49 (dd, J = 9.7, 2.4 Hz, 2H), 2.08–2.02 (m, 1H), 1.83–1.76 (m, 1H), 1.32 (s, 3H), 1.01 (dt, J = 13.0, 2.4 Hz, 1H), 0.82 (d, J = 7.1 Hz, 3H). 13C-NMR (101 MHz, CDCl3): δ 158.87, 141.25, 140.04, 132.89, 128.69, 128.38, 126.08, 111.23, 110.89, 63.81, 62.96, 55.98, 55.11, 43.62, 37.61, 37.54, 37.20, 35.96, 25.98, 13.03. HRMS: [C23H29NO2]H+ Calcd: 352.2277; Found: 352.2279.
  • (2R,6S,11S)-6,11-Dimethyl-3-phenethyl-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocine-1,8-diol (2R,6S,11S-(+)-36). In a flame-dried flask, the aromatic ether (+)-35 (0.493 g, 1 equiv, 1.40 mmol) was dissolved in dichloromethane (10 mL) and cooled to –78 °C. To this solution, boron tribromide (703 mg, 265 µL, 2 equiv, 2.81 mmol) was added, and the reaction was allowed to warm to room temperature. The reaction was cooled to 0 °C and quenched with MeOH followed by 2M HCl. The reaction was allowed to stir for 1 h and then basified with a saturated sodium bicarbonate solution. The aqueous phase was separated and extracted 3x with CHCl3, followed by washing the combined organic phases with a saturated sodium bicarbonate solution. After drying, the organic phase was concentrated in vacuo, and the residue purified via flash chromatography, eluting with 7% CMA in CHCl3, to give the phenol (+)-36 (0.312 g, 925 µmol, 65.9%) as a white foam, [α]25D +58.1° (c 1.14, MeOH). 1H-NMR (400 MHz; CDCl3): δ 7.40 (d, J = 8.3 Hz, 1H), 7.31–7.18 (m, 8H), 6.72–6.69 (m, 2H), 6.63 (d, J = 2.6 Hz, 1H), 4.62 (d, J = 6.5 Hz, 1H), 3.54 (s, 1H), 3.11 (td, J = 10.8, 5.3 Hz, 2H), 2.93–2.86 (m, 3H), 2.78 (q, J = 6.5 Hz, 2H), 2.51 (dd, J = 8.9, 2.2 Hz, 2H), 2.04 (dq, J = 10.6, 3.5 Hz, 2H), 1.83–1.75 (m, 2H), 1.34 (s, 1H), 1.31 (d, J = 12.9 Hz, 4H), 1.01 (dt, J = 13.0, 2.3 Hz, 1H), 0.87 (d, J = 7.3 Hz, 1H), 0.82 (d, J = 7.1 Hz, 3H). 13C-NMR (101 MHz, CDCl3): δ 154.99, 141.50, 139.99, 132.58, 130.07, 128.75, 128.68, 128.62, 128.40, 128.36, 126.11, 113.64, 111.53, 63.81, 62.91, 55.97, 43.60, 37.52, 37.49, 37.14, 35.93, 25.95, 13.00. HRMS: [C22H28NO2]+ Calcd: 338.2120; Found: 338.2116. The HCl salt of the phenol (+)-36 was formed by dissolving the free base in a minimal amount of acetone, followed by the addition of 6 drops of concentrated HCl. The solution was concentrated to a thick wax that was triturated in diethyl ether at room temperature overnight to provide the HCl salt as a free-flowing off-white solid. Anal. Calcd. For C22H28ClNO2 • 0.7 H2O: C, 68.36; H, 7.67; N, 3.62. Found C, 68.53; H, 7.81; N, 3.45.
  • (2S,6R,11R)-6,11-Dimethyl-3-phenethyl-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocine-1,8-diol (2S,6R,11R)-(−)-36. In a flame-dried flask, the aromatic ether ((−)-35 (0.396 g, 1 equiv, 1.13 mmol) was dissolved in dichloromethane (10 mL) and cooled to –78 °C. To this solution, boron tribromide (0.564 mg, 213 µL, 2 equiv, 2.25 mmol) was added, and the reaction was allowed to warm to room temperature. The reaction was cooled to 0 °C and quenched with MeOH followed by 2M HCl. The reaction was allowed to stir for 1 h and then basified with a saturated sodium bicarbonate solution. The aqueous phase was extracted 3x with CHCl3, and the combined organic phases were washed with a saturated sodium bicarbonate solution. After drying, the organic phase was purified by flash chromatography, eluting with 7% CMA in CHCl3, to give (−)-36 as a white foam (0.190 g, 563 µmol, 50.0%). [α]25D –57.4° (c 1.45, MeOH) 1H-NMR (400 MHz; CDCl3): δ 7.40 (d, J = 8.3 Hz, 1H), 7.31–7.16 (m, 8H), 6.70 (td, J = 6.0, 2.8 Hz, 2H), 6.63 (d, J = 2.5 Hz, 1H), 4.62 (d, J = 6.5 Hz, 1H), 4.17 (s, 1H), 3.54 (s, 1H), 3.11 (dt, J = 13.0, 6.6 Hz, 2H), 2.89 (dq, J = 11.4, 7.2 Hz, 3H), 2.82–2.74 (m, 3H), 2.50 (t, J = 4.5 Hz, 2H), 2.04 (dtd, J = 14.2, 7.2, 3.5 Hz, 2H), 1.86–1.75 (m, 2H), 1.36–1.33 (m, 2H), 1.30 (s, 3H), 1.01 (dt, J = 12.9, 2.3 Hz, 1H), 0.88 (d, J = 7.2 Hz, 1H), 0.82 (d, J = 7.1 Hz, 3H). 13C NMR (101 MHz, CDCl3): δ 155.12, 141.48, 139.97, 132.39, 130.07, 128.75, 128.68, 128.61, 128.40, 128.37, 126.12, 126.09, 113.69, 111.73, 111.56, 73.50, 63.83, 62.90, 59.67, 57.78, 55.96, 43.60, 37.49, 37.13, 35.92, 25.96, 14.38, 13.00.
  • (2S,6R,11R)-8-Methoxy-1,6,11-trimethyl-3-phenethyl-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-1-ol (2S,6R,11R-(−)-37). In an argon-charged, flame-dried flask, ((−)-34 (0.5 g, 1 equiv, 1 mmol) was dissolved in THF (15 mL) and cooled to –78 °C. Methyllithium (0.09 g, 3 mL, 1.3 molar, 3 equiv, 4 mmol) was added, and the reaction was warmed to room temperature overnight. The reaction mixture was quenched with a concentrated NH4Cl solution, and it was extracted with CHCl3. The aqueous phase was separated and extracted with CHCl3 2x, and the combined organic phases were washed with brine. The organic phase was then dried with sodium sulfate, filtered, and purified via flash chromatography.to give (−)-37 as a dark amber oil (0.454 g, 1.24 mmol, 90%). 1H NMR (400 MHz; CDCl3): δ 7.52 (d, J = 8.6 Hz, 1H), 7.32–7.25 (m, 3H), 7.24–7.19 (m, 3H), 6.83 (dt, J = 8.6, 3.2 Hz, 1H), 6.69 (d, J = 2.7 Hz, 1H), 3.80 (d, J = 6.4 Hz, 3H), 3.14–3.07 (m, 1H), 2.98–2.89 (m, 2H), 2.82–2.73 (m, 3H), 2.66–2.42 (m, 4H), 2.15 (qd, J = 7.2, 3.4 Hz, 1H), 1.82 (td, J = 13.2, 4.8 Hz, 1H), 1.54 (d, J = 7.7 Hz, 3H), 1.34 (d, J = 10.3 Hz, 3H), 0.95 (t, J = 8.6 Hz, 3H). 13C-NMR (101 MHz, CDCl3): δ 128.85, 128.70, 128.42, 128.15, 127.79, 126.15, 111.64, 110.83, 69.26, 67.29, 60.31, 55.76, 55.10, 55.08, 43.38, 43.34, 37.97, 37.95, 36.99, 35.99, 33.62, 26.32, 23.69, 16.35. HRMS: [C24H32NO2]+ Calcd: 366.2433; found: 366.2437.
  • (2R,6S,11S)-8-Methoxy-1,6,11-trimethyl-3-phenethyl-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-1-ol (2R,6S,11S-(+)-37). In an argon-charged flame-dried flask, (+)-34 (0.5 g, 1 equiv, 1 mmol) was dissolved in THF (15 mL) and cooled to –78 °C. Methyllithium (0.09 g, 3 mL, 1.3 molar, 3 equiv, 4 mmol) was added, and the reaction was allowed to warm to room temperature. The reaction mixture was quenched with a concentrated aqueous NH4Cl solution and extracted with CHCl3. The aqueous phase was separated and extracted 2x with CHCl3, and the combined organic phases were washed with brine. The organic phase was then dried with sodium sulfate, filtered, and purified by flash chromatography to give (+)-37 as a dark amber oil (0.51 g, 1.4 mmol, 100%). 1H NMR (400 MHz; CDCl3): δ 7.52 (d, J = 8.6 Hz, 1H), 7.31–7.23 (m, 3H), 7.23–7.19 (m, 3H), 6.84 (dt, J = 8.6, 2.6 Hz, 1H), 6.69 (d, J = 2.6 Hz, 1H), 3.79 (d, J = 6.5 Hz, 3H), 3.13–3.06 (m, 1H), 2.98–2.88 (m, 2H), 2.84–2.77 (m, 2H), 2.65 (d, J = 1.8 Hz, 1H), 2.59–2.45 (m, 2H), 2.15 (qd, J = 7.0, 3.4 Hz, 1H), 1.81 (td, J = 13.2, 4.8 Hz, 1H), 1.53 (s, 3H), 1.33 (s, 3H), 1.07–1.04 (m, 1H), 0.95 (t, J = 7.1 Hz, 3H). 13C NMR (101 MHz, CDCl3): δ 158.67, 140.41, 128.82, 128.69, 128.40, 128.21, 127.77, 126.13, 111.88, 111.64, 110.82, 69.25, 67.27, 55.80, 55.10, 43.42, 38.09, 38.07, 37.99, 37.02, 36.03, 33.62, 26.33, 16.36. HRMS: [C24H32NO2]+ Calcd: 366.2433; found: 366.2433.
  • (2R,6S,11S)-6,11-Dimethyl-1-methylene-3-phenethyl-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol (2R,6S,11S-(+)-38). In a flame-dried flask, (+)-37 (0.5 g, 1 equiv, 1 mmol) was dissolved in dichloromethane (7 mL) and cooled to –78 °C. To this solution, boron tribromide (498 mg, 0.188 mL, 1 equiv, 1.99 mmol) was added, and the reaction was allowed to warm to room temperature. The reaction was quenched with MeOH followed by an equal volume of 2M HCl. The solution was heated to 75 °C for 2 h, followed by addition of a sodium bicarbonate to a pH of 7.5–8. The aqueous phase was extracted with CHCl3 3x. The combined organic phases were washed with a saturated sodium bicarbonate solution and brine, then dried with sodium sulfate. The organic phase was purified by flash chromatography, eluting with 15% CMA in CHCl3 to give (+)-38. 1H NMR (400 MHz; CD3OD): δ 7.53 (d, J = 8.6 Hz, 1H), 7.23–7.20 (m, 2H), 7.13 (td, J = 6.8, 2.9 Hz, 3H), 6.67 (d, J = 2.6 Hz, 1H), 6.60 (dd, J = 8.6, 2.6 Hz, 1H), 5.68 (s, 1H), 4.80 (s, 1H), 3.33 (s, 1H), 3.30 (t, J = 3.5 Hz, 1H), 2.83 (dq, J = 6.6, 4.7 Hz, 1H), 2.76–2.68 (m, 2H), 2.61–2.57 (m, 1H), 2.46–2.41 (m, 1H), 1.97–1.90 (m, 2H), 1.84 (dt, J = 12.7, 6.3 Hz, 1H), 1.34–1.31 (m, 3H), 0.78 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz, CD3OD): δ 157.92, 142.09, 140.03, 136.67, 128.27, 128.02, 126.59, 125.70, 123.34, 113.34, 111.82, 110.61, 65.90, 56.79, 45.86, 41.80, 41.78, 36.94, 33.12, 24.66, 13.24. HRMS: [C23H28NO]+ Calculated: 334.2171; Found: 334.2165. The HCl salt of (+)-38 was obtained by dissolving the free base in a minimal amount of acetone. The solution was concentrated to a pale syrup in vacuo, followed by addition of diethyl ether. The mixture was stirred overnight to give (+)-38•HCl as a pale beige solid. Anal. Calcd. For C23H28ClNO • 0.7 H2O C, 72.21; H, 7.75; N, 3.66. Found C, 72.13; H, 7.55; N, 3.55.
  • (2S,6R,11R)-6,11-Dimethyl-1-methylene-3-phenethyl-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol (2S,6R,11R-(−)-38). In a flame-dried flask, (−)-37 (0.454 g, 1 equiv, 1.24 mmol) was dissolved in dichloromethane (7 mL) and cooled to –78 °C. To this solution, boron tribromide (615 mg, 0.232 mL, 1.98 equiv, 2.45 mmol) was added, and the reaction was allowed to warm to room temperature. The reaction was quenched with MeOH followed by an equal volume of 2M HCl. The solution was heated to 75 °C for 2 h, followed by addition of a saturated sodium bicarbonate solution to a pH of 7.5–8. Chloroform was added, and the aqueous phase was extracted with CHCl3 3x. The combined organic phase was washed with a saturated sodium bicarbonate solution and brine, then dried with sodium sulfate. The organic phase was purified by flash chromatography, eluting with 15% CMA in CHCl3 to give (−)-38 (0.125 g, 375 µmol, 30.2%). 1H NMR (400 MHz; CD3OD): δ 7.55 (d, J = 8.6 Hz, 1H), 7.25–7.22 (m, 2H), 7.17–7.12 (m, 3H), 6.67 (d, J = 2.6 Hz, 1H), 6.60 (dd, J = 8.6, 2.6 Hz, 1H), 5.71 (s, 1H), 4.84 (s, 1H), 3.34 (d, J = 3.0 Hz, 1H), 2.86 (dt, J = 11.6, 5.7 Hz, 1H), 2.79–2.68 (m, 2H), 2.65–2.61 (m, 1H), 2.47 (td, J = 13.0, 6.0 Hz, 1H), 2.00–1.91 (m, 2H), 1.85 (td, J = 12.8, 4.5 Hz, 1H), 1.34 (s, 3H), 0.80 (d, J = 7.0 Hz, 3H). 13C NMR (101 MHz, CD3OD): δ 159.35, 143.52, 141.46, 138.12, 129.69, 129.44, 128.04, 127.12, 124.76, 114.74, 113.21, 112.05, 67.35, 58.22, 47.30, 43.23, 43.21, 38.37, 34.53, 26.05, 14.61. HRMS: [C23H28NO]+ Calcd: 334.2171; found: 334.2165. The -(−)-38•HCl salt was formed by dissolving the free base in a minimal amount of acetone. The solution was concentrated to a pale syrup, and diethyl ether was added. The mixture was stirred overnight to give (−)-38•HCl as a pale beige solid. Anal. Calcd. For C23H28ClNO • 0.4 H2O C, 73.25; H, 7.70; N, 3.71. Found: C, 73.24; H, 7.82; N, 3.57.
  • (2R,6S,11S)-1,6,11-Trimethyl-3-phenethyl-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol (2R,6S,11S-(+)-39). In a Parr Shaker flask, (+)-38 (0.107 g, 1 equiv, 321 µmol), palladium on carbon (205 mg, 5% wt, 0.3 equiv, 96.3 µmol), and acetic acid (18.4 µL, 1 equiv, 321 µmol) were dissolved in methanol (10 mL) under an argon atmosphere. The vessel was charged with 30 psi of hydrogen gas and shaken overnight at room temperature. The reaction mixture was filtered through celite and rinsed multiple times with methanol. The filtrate was purified via flash chromatography to give (+)-39 as a light brown foam (56 mg, 0.17 mmol, 52%). 1H NMR (400 MHz; CDCl3): δ 7.29–7.25 (m, 2H), 7.22–7.19 (m, 3H), 7.05 (d, J = 9.2 Hz, 1H), 6.76–6.73 (m, 2H), 3.22 (d, J = 2.3 Hz, 1H), 3.05–2.93 (m, 5H), 2.89 (dd, J = 12.2, 3.9 Hz, 1H), 2.26 (td, J = 12.6, 3.3 Hz, 1H), 2.19–2.13 (m, 1H), 2.11 (s, 2H), 1.95 (td, J = 13.3, 4.7 Hz, 1H), 1.37 (d, J = 7.6 Hz, 3H), 1.29 (s, 3H), 0.87 (d, J = 7.2 Hz, 3H). 13C NMR (101 MHz, CDCl3): δ 155.80, 141.25, 138.45, 130.41, 128.76, 128.61, 128.20, 126.57, 114.10, 112.31, 64.12, 55.48, 45.33, 40.38, 39.36, 36.13, 32.46, 25.47, 24.12, 15.36. HRMS: [C23H30NO]+ Calcd: 336.2327; Found: 336.2327. The free base was dissolved in a minimal amount of acetone, and 6 drops of concentrated HCl was added. Upon stirring, a syrup formed. Diethyl ether was added, and the mixture was stirred overnight to give (+)-39. HCl as an off-white solid (32 mg), mp 178–181 °C, [α]25D = +70.7° (c 0.39, MeOH). Anal. Calcd. For C23H30ClNO • 0.75 H2O C, 71.67; H, 8.24; N, 3.63. Found: C, 71.83; H, 8.40; N:3.54.
  • (2S,6R,11R)-1,6,11-Trimethyl-3-phenethyl-1,2,3,4,5,6-hexahydro-2,6-methanobenzo[d]azocin-8-ol (2S,6R,11R-(−)-39). In a Parr Shaker flask, (−)-38 (0.120 g, 1 equiv, 360 µmol), palladium on carbon (230 mg, 5% wt, 0.3 equiv, 108 µmol), and acetic acid (20.6 µL, 1 equiv, 360 µmol) were added to methanol (10 mL) under an argon atmosphere. The vessel was charged with 30 psi of hydrogen gas and shaken overnight at room temperature. The reaction mixture was filtered through celite and rinsed multiple times with methanol. The filtrate was purified via flash chromatography to give (−)-39 as a light brown foam (71 mg, 0.21 mmol, 59%), 1H NMR (400 MHz; CDCl3): δ 7.31–7.27 (m, 2H), 7.27–7.20 (m, 3H), 7.07 (d, J = 8.2 Hz, 1H), 6.83–6.81 (m, 2H), 3.32 (s, 1H), 3.13–3.00 (m, 4H), 3.00–2.94 (m, 1H), 2.41–2.35 (m, 2H), 2.16–2.08 (m, 2H), 1.40 (d, J = 7.6 Hz, 3H), 1.33 (s, 2H), 0.89 (d, J = 7.2 Hz, 3H). 13C NMR (101 MHz, CDCl3): δ 155.84, 140.71, 137.58, 128.78, 128.74, 128.31, 126.86, 114.42, 112.38, 64.56, 55.44, 45.69, 39.72, 38.76, 35.96, 31.86, 25.19, 24.08, 15.24. HRMS: [C23H30NO]+ Calcd: 336.2327; Found: 336.2326. The free base was dissolved in a minimal amount of acetone, and 6 drops of concentrated HCl was added. Diethyl ether was added to the syrup that was obtained, and the mixture was stirred overnight to give (−)-39•HCl as an off-white solid (57 mg), mp 181–184 °C, [α]25D –69.1° (c 0.59, MeOH). Anal. Calcd. For C23H30ClNO • 0.75 H2O C, 71.67; H, 8.24; N, 3.63. Found: C, 71.73; H, 8.34; N, 3.48.

3.3. X-ray Crystal Structure Experimental Data

Single-crystal X-ray diffraction data on compound (+)-34 were collected using Cu Kα radiation and a Bruker SMART APEX II CCD area detector. The crystal was prepared for data collection by coating with high-viscosity microscope oil. The oil-coated crystal was mounted on a micromesh mount (MiTeGen, Inc., Ithaca, NY, USA) and transferred to the diffractometer, and a data set collected at 293(2) K. The 0.097 × 0.074 × 0.060 mm3 crystal was monoclinic in space group P21 with unit cell dimensions a = 11.2668(6) Å, b = 7.8053(4) Å, c = 13.0428(6) Å, α = γ = 90° and β = 97.890(2)°. The final anisotropic full matrix least-squares refinement on F2 with 272 variables converged at R1 = 5.68% for the observed data and wR2 = 15.01% for all data. The structure was solved by direct methods and refined by full-matrix least-squares on F2 values using the programs found in the SHELXL suite (Bruker, SHELXL v2014.7, 2014, Bruker AXS Inc., Madison, WI, USA). Corrections were applied for Lorentz, polarization, and absorption effects. Parameters refined included atomic coordinates and anisotropic thermal parameters for all nonhydrogen atoms. The H atoms were included using a riding model and direct assignment. The hydrogen atom found on the solvent methanol (O25) required a DFIX command to prevent migration. This is likely due to very minor positional disorder that could not be modeled to completion. Stereochemistry of C1 (R), C5 (S) and C9 (S) was determined via the orientation of the molecules. Complete information on data collection and refinement is available in the Supplementary Materials, Tables S1–S7.
Atomic coordinates for (+)-34 have been deposited with the Cambridge Crystallographic Data Centre, deposition number 2290877. Copies of the data can be obtained, free of charge, on application to CCDC, 12 Union Road, Cambridge, CB2 1EZ, UK (fax: +44(0)-1223-336033 or e-mail: [email protected]).

3.4. In Vitro Assay

3.4.1. Cell Lines and Cell Culture

Cell lines and cell culture: cAMP HunterTM Chinese hamster ovary cells (CHO-K1) that express human μ-opioid receptor (OPRM1), human κ-opioid receptor (OPRMK1), and human δ-receptor (OPRMD1) were purchased from Eurofins DiscoverX (Fremont, CA) and used for the forskolin-induced cAMP accumulation assays [16]. All cell lines were maintained in F-12 media with 10% fetal bovine serum (Life Technologies, Grand Island, NY, USA), 1% penicillin/streptomycin/l-glutamine (Life Technologies), and 4.800 µg/mL Geneticin (Mirus Bio, Madison, WI, USA). All cells were grown at 37 °C and 5% CO2 in a humidified incubator.

3.4.2. Forskolin-Induced cAMP Accumulation Assays

Assays were performed as previously described [30]. Briefly, 10,000 cells/well of cells were plated in 384-well tissue culture plates and incubated overnight at 37 °C in 5% CO2. Stock solutions of the compound were prepared in DMSO at 5 mM concentration, and then 9 to 10 concentrations of 100X working solutions were prepared by serial dilution using DMSO. 5X working solutions were subsequently prepared using assay buffer consisting of Hank’s Buffered Salt Solution, HEPES, and forskolin. For the agonist assay, cells were incubated at 37 °C with compounds for 30 min at a 1X final concentration. For the antagonist assay [28], cells were incubated at 37 °C with compounds for 15 min before 30 min incubation at 37 °C with the selected agonist at their EC50 or EC90 dose. Detection was performed by using the HitHunter cAMP Assay for Small Molecules by DiscoverX according to the manufacturer’s directions, and the BioTek Synergy H1 hybrid plate reader (BioTek, Winooski, VT, USA) and Gen5 Software version 2.01 were used to quantify luminescence (BioTek, Winooski, VT, USA). To determine % efficacy in forskolin-induced cAMP assays, data were blank subtracted with the vehicle control, followed by normalization to the forskolin control. Data were then analyzed in GraphPad Prism 8 (GraphPad, LaJolla, CA, USA) using nonlinear regression. Values are expressed as the mean ± SEM of at least three independent experiments. Degree of antagonism (Imax) was normalized to naltrexone (MOR, DOR) or nor-BNI (KOR).

4. Conclusions

Highly potent MOR agonists were found with electron withdrawing (e.g., NO2, (−)-3, EC50 = 0.3 nM, % Emax = 101%) and electron donating (e.g., OH, (−)-20, EC50 = 0.13 nM, % Emax = 102%) substituents at the para position in the aromatic ring of the N-phenethyl moiety. An ortho-positioned substituent (e.g., F, (−)-8) was also extremely potent (EC50 = 0.2 nM, % Emax = 101%). The meta-substituted compounds were in general much less potent than their comparable ortho- and para-analogs with one exception—the meta-fluoro analog (−)-7 (EC50 = 0.6 nM, % Emax = 100%) was more potent than the para-fluoro analog (−)-6 (EC50 = 1.8 nM, % Emax = 100%). A clear pattern between agonist potency and electron donating or withdrawal effects was not observed.
Steric effects were not clearly observable since potent compounds were found with both more bulky and less bulky substituents. Compounds with bulky ortho and meta substituents (e.g., 4 and 5) were generally less potent than a compound with a comparable para substituent (6). The bulkier substituents—the 4-nitro ((−)-3) and 4-bromo ((−)-12) moieties, were potent, as were the less bulky 4-hydroxy ((−)-20) and 4-chloro ((−)-15) substituents. Addition of a second chloro atom in the aromatic ring ((−)-21 and (−)-22) increased possible steric interactions and decreased potency—the monochloro substituent at the ortho (−)-17 or para (−)-15 position was at least three-fold more potent than the dichloro compounds.
A remarkable specificity of the chain length of the N-phenethyl moiety was observed. A single extra methylene changed the highly potent N-phenethyl compound (−)-23 (EC50 = 0.27, %Emax = 101%) into a relatively inactive N-phenylpropyl compound (−)-30 (EC50 = 70 nM, %Emax = 101%). The synthesis of levorotatory C8-substituted N-phenethylnormetazocines gave potent compounds, with the C8-methylene-substituted N-phenethylnormetazocine having subnanomolar potency. All the potent C8-substituted compounds were fully efficacious in vitro. These data could be summarized by noting that most substituents on the aromatic ring in the phenethyl moiety did not increase potency at MOR when compared with the unsubstituted aromatic ring in 23. All of the substituents that were examined reduced potency, with only two exceptions, and those only slightly increased the potency of the unsubstituted compound 23. Similarly, there were no major effects observable at DOR and KOR from compounds with the added substituents when compared with the unsubstituted compound 23. Although the examined substituents on the aromatic ring in the N-phenethyl side chain were, with only two minor exceptions, unable to increase MOR potency or efficacy, the length of that side chain was of extreme importance—the addition of a single methylene group, to form an N-phenylpropyl side chain, resulted in over a 250-fold reduction in potency at MOR.

Supplementary Materials

The following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/molecules28237709/s1, Figures S1–S40: 1H and 13C-NMR spectra of novel compounds, and Tables S1–S7: Crystal data, atomic coordinates from X-ray crystallographic determination of (+)-34.

Author Contributions

Conceptualization, A.S. and A.E.J.; Funding acquisition, T.E.P., A.T.K. and K.C.R.; Investigation, M.D., G.W.W., D.L. and G.H.I.; Methodology, M.D., A.S., D.L., T.E.P. and G.H.I.; Project administration, T.E.P.; Resources, T.E.P., A.T.K. and K.C.R.; Supervision, A.S. and T.E.P.; Validation, A.S. and D.L.; Writing—original draft, A.E.J.; Writing—review and editing, M.D., G.W.W., A.S., D.L., T.E.P., G.H.I., A.T.K., A.E.J. and K.C.R. All authors have read and agreed to the published version of the manuscript.

Funding

This work was also supported in part by DA051377 (to T.E.P.) and the Kentucky Medical Services Foundation Endowed Chair in Pharmacy (T.E.P.).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

The data presented in this study are available in this article or in the Supplementary Materials.

Acknowledgments

The work of M.D., G.W.W., A.S., A.E.J. and K.C.R. was supported by the NIH Intramural Research Program (IRP) of the National Institute on Drug Abuse and the National Institute of Alcohol Abuse and Alcoholism. This work was also supported in part by DA051377 (to T.E.P.) and the Kentucky Medical Services Foundation Endowed Chair in Pharmacy (T.E.P.). The X-ray crystallographic work of G.H.I. and A.T.K. was supported by NIDA through an Interagency Agreement #Y1-DA1101 with the Naval Research Laboratory (NRL). NIH, DHHS. We thank John Lloyd (Mass Spectrometry Facility, NIDDK) for the mass spectral data.

Conflicts of Interest

The authors declare that they have no known competing financial interest or personal relationships that could have appeared to influence the work reported in this paper.

Abbreviations

MORmu-opioid receptor
DORdelta-opioid receptor
KORkappa-opioid receptor
cAMPcyclic adenosine monophosphate
cAMP assayInhibition of forskolin-induced cAMP accumulation assay

References

  1. May, E.L.; Murphy, J.G. Structures Related to Morphine. III. Synthesis of an Analog of N-Methylmorphinan. J. Org. Chem. 1955, 20, 257–263. [Google Scholar] [CrossRef]
  2. Ager, J.H.; May, E.L. Structures Related to Morphine. XIII. 2-Alkyl-2′-hydroxy-5,9-dimethyl-6,7-benzomorphans and a More Direct Synthesis of the 2-Phenethyl Compound (NIH 7519). J. Org. Chem. 1960, 25, 984–986. [Google Scholar] [CrossRef]
  3. Asano, M.; Motoike, S.; Yokota, C.; Usuki, N.; Yamamoto, H.; Urabe, T.; Katarao, K.; Hide, I.; Tanaka, S.; Kawamoto, M.; et al. SKF-10047, a prototype Sigma-1 receptor agonist, augmented the membrane trafficking and uptake activity of the serotonin transporter and its C-terminus-deleted mutant via a Sigma-1 receptor-independent mechanism. J. Pharmacol. Sci. 2019, 139, 29–36. [Google Scholar] [CrossRef]
  4. Aceto, M.D.; May, E.L. Antinociceptive Studies of Optical Isomers of N-Allylnormetazocine SKF 10,047. Eur. J. Pharmacol. 1983, 91, 267–272. [Google Scholar] [CrossRef] [PubMed]
  5. Zarin, M.K.; Dehaen, W.; Salehi, P.; Asl, A.A. Synthesis and Modification of Morphine and Codeine, Leading to Diverse Libraries with Improved Pain Relief Properties. Pharmaceutics 2023, 15, 1779. [Google Scholar] [CrossRef] [PubMed]
  6. Palmer, D.C.; Strauss, M.J. Benzomorphans: Synthesis, stereochemistry reactions, and spectroscopic characterizations. Chem. Rev. 1977, 77, 1–36. [Google Scholar] [CrossRef]
  7. Pasquinucci, L.; Prezzavento, O.; Marrazzo, A.; Amata, E.; Ronsisvalle, S.; Georgoussi, Z.; Fourla, D.-D.; Scoto, G.M.; Parenti, C.; Arico, G.; et al. Evaluation of N-substitution in 6,7-benzomorphan compounds. Bioorg. Med. Chem. 2010, 18, 4975–4982. [Google Scholar] [CrossRef] [PubMed]
  8. Kanematsu, K.; Takeda, M.; Jacobson, A.E.; May, E.L. Synthesis of 6,7-benzomorphan and related nonquaternary carbon structures with marked analgetic activity. J. Med. Chem. 1969, 12, 405–408. [Google Scholar] [CrossRef] [PubMed]
  9. Jacobson, A.E.; May, E.L. Structures Related to Morphine. XXVII. α- and β-5,9-Diethyl-2-methyl-6,7-benzomorphans. J. Med. Chem. 1964, 7, 409–412. [Google Scholar] [CrossRef] [PubMed]
  10. May, E.L.; Aceto, M.D.; Bowman, E.R.; Bentley, C.; Martin, B.R.; Harris, L.S.; Medzihradsky, F.; Mattson, M.V.; Jacobson, A.E. Antipodal α-N-(Methyl through Decyl)-N-Normetazocines (5,9α-Dimethyl-2′-hydroxy-6,7-benzomorphans): In Vitro and In Vivo Properties. J. Med. Chem. 1994, 37, 3408–3418. [Google Scholar] [CrossRef] [PubMed]
  11. Jacobson, A.E.; May, E.L. Structures related to morphine. XXXI. 2′-Substituted benzomorphans. J. Med. Chem. 1965, 8, 563–566. [Google Scholar] [CrossRef]
  12. Costanzo, G.; Turnaturi, R.; Parenti, C.; Spoto, S.; Piana, S.; Dichiara, M.; Zagni, C.; Galambos, A.R.; Essmat, N.; Marrazzo, A.; et al. New Insights into the Opioid Analgesic Profile of cis-(-)-N-Normetazocine-derived Ligands. Molecules 2023, 28, 4827. [Google Scholar] [CrossRef] [PubMed]
  13. May, E.L.; Jacobson, A.E.; Mattson, M.V.; Traynor, J.R.; Woods, J.H.; Harris, L.S.; Bowman, E.R.; Aceto, M.D. Synthesis and in vitro and in vivo activity of (-)-(1R,5R,9R)- and (+)-(1S,5S,9S)-N-alkenyl-, -N-alkynyl-, and N--cyanoalkyl-5,9-dimethyl-2′-hydroxy-6,7-benzomorphan homologues. J. Med. Chem. 2000, 43, 5030–5036. [Google Scholar] [CrossRef] [PubMed]
  14. VanAlstine, M.; Wentland, M.; Alvarez, J.; Cao, Q.; Cohen, D. Redefining the structure-activity relationships of 2,6-methano-3-benzazocines. Part 9: Synthesis, characterization and molecular modeling of pyridinyl isosteres of N-BPE-8-CAC (1), a high affinity ligand for opioid receptors. Bioorg. Med. Chem. Lett. 2013, 23, 2128–2133. [Google Scholar] [CrossRef]
  15. Wentland, M.P.; VanAlstine, M.; Kucejko, R.; Lou, R.; Cohen, D.J.; Parkhill, A.L.; Bidlack, J.M. Redefining the Structure–Activity Relationships of 2,6-Methano-3-benzazocines. 4. Opioid Receptor Binding Properties of 8-[N-(4′-phenyl)-phenethyl)carboxamido] Analogues of Cyclazocine and Ethylketocycalzocine. J. Med. Chem. 2006, 49, 5635–5639. [Google Scholar] [CrossRef] [PubMed]
  16. Turnaturi, R.; Chiechio, S.; Pasquinucci, L.; Spoto, S.; Costanzo, G.; Dichiara, M.; Piana, S.; Grasso, M.; Amata, E.; Marrazzo, A.; et al. Novel N-normetazocine Derivatives with Opioid Agonist/Sigma-1 Receptor Antagonist Profile as Potential Analgesics in Inflammatory Pain. Molecules 2022, 27, 5135. [Google Scholar] [CrossRef]
  17. Wang, M.; Irvin, T.C.; Herdman, C.A.; Hanna, R.D.; Hassan, S.A.; Lee, Y.-S.; Kaska, S.; Crowley, R.S.; Prisinzano, T.E.; Withey, S.L.; et al. The Intriguing Effects of Substituents in the N-Phenethyl Moiety of Norhydromorphone: A Bifunctional Opioid from a Set of “Tail Wags Dog” Experiments. Molecules 2020, 25, 2640. [Google Scholar] [CrossRef] [PubMed]
  18. May, E.L.; Aceto, M.D.; Bowman, E.R.; Traynor, J.R.; Woods, J.H.; Jacobson, A.E.; Harris, L.S. Enantiomeric (-)-(1R,5R,9R and (+)-(1S,5S,9S) Heterocyclic N-Substituted-Normetazocines: Synthesis of Potent and Selective Antinociceptives and Opioid Antagonists by Modification of the N-Substituent. Med. Chem. Res. 2000, 10, 178–185. [Google Scholar]
  19. Pasquinucci, L.; Turnaturi, R.; Aricò, G.; Parenti, C.; Pallaki, P.; Georgoussi, Z.; Ronsisvalle, S. Evaluation of N-substituent structural variations in opioid receptor profile of LP1. Bioorg. Med.Chem. 2016, 24, 2832–2842. [Google Scholar] [CrossRef]
  20. Gutman, E.S.; Bow, E.; Li, F.; Sulima, A.; Kaska, S.; Crowley, R.; Prisinzano, T.E.; Lee, Y.-S.; Hassan, S.A.; Imler, G.H.; et al. G-Protein biased opioid agonists: 3-hydroxy-N-phenethyl-5-phenylmorphans with three-carbon chain substituents at C9. RSC Med. Chem. 2020, 11, 896–904. [Google Scholar] [CrossRef]
  21. Chambers, D.R.; Sulima, A.; Luo, D.; Prisinzano, T.E.; Goldberg, A.; Xie, B.; Shi, L.; Paronis, C.A.; Bergman, J.; Selley, D.; et al. A Journey Through Diastereomeric Space: The Design, Synthesis, in vitro and in vivo Pharmacological Activity, and Molecular Modeling of Novel Potent Diastereomeric MOR Agonists and Antagonists. Molecules 2022, 27, 6455. [Google Scholar] [CrossRef] [PubMed]
  22. Lutz, J.A.; Sulima, A.; Gutman, E.S.; Bow, E.W.; Luo, D.; Kaska, S.; Prisinzano, T.E.; Paronis, C.A.; Bergman, J.; Imler, G.H.; et al. Discovery of a Potent Highly Biased MOR Partial Agonist among Diastereomeric C9-Hydroxyalkyl-5-phenylmorphans. Molecules 2023, 28, 4795. [Google Scholar] [CrossRef] [PubMed]
  23. Boulanger, W.A. Improved resolution of (+/−)-cis-2’-hydroxy-5,9-dimethyl-6,7- benzomorphan and preparation of racemic, (+)-, and (−)-cis-2- methylcyclopropyl-2 ‘-hydroxy-5,9-dimethyl-6,7-benzomorphan (cyclazocine). Synth. Commun. 1999, 29, 2201–2210. [Google Scholar] [CrossRef]
  24. Zhang, Y.; Lee, Y.S.; Rothman, R.B.; Dersch, C.M.; Deschamps, J.R.; Jacobson, A.E.; Rice, K.C. Probes for Narcotic Receptor Mediated Phenomena. 39. Enantiomeric N-Substituted Benzofuro[2,3-c]pyridin-6-ols: Synthesis and Topological Relationship to Oxide-Bridged Phenylmorphans. J. Med. Chem. 2009, 52, 7570–7579. [Google Scholar] [CrossRef]
  25. May, E.L.; Eddy, N.B. Structures Related to Morphine. XII.1 (±)-2′-Hydroxy-5,9-dimethyl-2-phenethyl-6,7-benzomorphan (NIH 7519) and Its Optical Forms. J. Org. Chem. 1959, 24, 1435–1437. [Google Scholar] [CrossRef]
  26. May, E.L. Structures Related to Morphine. VI. N-Phenylethyl Derivatives of Some Phenyl- and Benz-morphans. J. Org. Chem. 1956, 21, 899–901. [Google Scholar] [CrossRef]
  27. Brine, G.A.; Berrang, B.; Hayes, J.P.; Carroll, F.I. An improved resolution of (±)-cis-N-normetazocine. J. Heterocycl. Chem. 1990, 27, 2139–2143. [Google Scholar] [CrossRef]
  28. Hedrick, S.L.; Luo, D.; Kaska, S.; Niloy, K.K.; Jackson, K.; Sarma, R.; Horn, J.; Baynard, C.; Leggas, M.; Eduardo, R.; et al. Design, synthesis, and preliminary evaluation of a potential synthetic opioid rescue agent. J. Biomed. Sci. 2021, 28, 62. [Google Scholar] [CrossRef]
  29. Neumeyer, J.L.; Bidlack, J.M.; Zong, R.; Bakthavachalam, V.; Gao, P.; Cohen, D.J.; Negus, S.S.; Mello, N.K. Synthesis and Opioid Receptor Affinity of Morphinan and Benzomorphan Derivatives:  Mixed κ Agonists and μ Agonists/Antagonists as Potential Pharmacotherapeutics for Cocaine Dependence. J. Med. Chem. 2000, 43, 114–122. [Google Scholar] [CrossRef]
  30. Riley, A.P.; Groer, C.E.; Young, D.; Ewald, A.W.; Kivell, B.M.; Prisinzano, T.E. Synthesis and κ-Opioid Receptor Activity of Furan-Substituted Salvinorin A Analogues. J. Med. Chem. 2014, 57, 10464–10475. [Google Scholar] [CrossRef]
Figure 1. Molecular structures of morphine, morphinan, and the 6,7-benzomorphans-metazocine, phenazocine and pentazocine.
Figure 1. Molecular structures of morphine, morphinan, and the 6,7-benzomorphans-metazocine, phenazocine and pentazocine.
Molecules 28 07709 g001
Scheme 1. Optical resolution of racemic normetazocine.
Scheme 1. Optical resolution of racemic normetazocine.
Molecules 28 07709 sch001
Scheme 2. Synthesis of N-phenethyl substituted 6,7-benzomorphans.
Scheme 2. Synthesis of N-phenethyl substituted 6,7-benzomorphans.
Molecules 28 07709 sch002
Scheme 3. Synthesis of modified (−)-N-phenethyl relatives (−)-24–(−)-26.
Scheme 3. Synthesis of modified (−)-N-phenethyl relatives (−)-24–(−)-26.
Molecules 28 07709 sch003
Scheme 4. Synthesis of the 1-methyl piperidine analog (−)-28.
Scheme 4. Synthesis of the 1-methyl piperidine analog (−)-28.
Molecules 28 07709 sch004
Scheme 5. Synthesis of the 4-nitrophenylpropyl substituent (−)-31.
Scheme 5. Synthesis of the 4-nitrophenylpropyl substituent (−)-31.
Molecules 28 07709 sch005
Scheme 6. Synthesis of rac m-methoxy-8-oxo-N-phenethylnormetazocine (rac-34).
Scheme 6. Synthesis of rac m-methoxy-8-oxo-N-phenethylnormetazocine (rac-34).
Molecules 28 07709 sch006
Scheme 7. Resolution of rac-34 to provide 1S,5R,9R-(−)-34 and 1R,5S,9S-(+)-34.
Scheme 7. Resolution of rac-34 to provide 1S,5R,9R-(−)-34 and 1R,5S,9S-(+)-34.
Molecules 28 07709 sch007
Figure 2. NMR chiral shift reagents.
Figure 2. NMR chiral shift reagents.
Molecules 28 07709 g002
Figure 3. X-ray crystal structure of the HBr salt of (2R,6S,11S)-(+)-34.HBr. The ellipsoids are shown at the 50% probability level. The crystal data, atomic coordinates, etc., have been cited in the Supplementary Materials.
Figure 3. X-ray crystal structure of the HBr salt of (2R,6S,11S)-(+)-34.HBr. The ellipsoids are shown at the 50% probability level. The crystal data, atomic coordinates, etc., have been cited in the Supplementary Materials.
Molecules 28 07709 g003
Scheme 8. Synthesis of (−)- and (+)-C8-hydroxy benzomorphans.
Scheme 8. Synthesis of (−)- and (+)-C8-hydroxy benzomorphans.
Molecules 28 07709 sch008
Scheme 9. Synthesis of C8-methylene ((−)-38 and (+)-38) and methyl ((−)-39 and (+)-39) compounds.
Scheme 9. Synthesis of C8-methylene ((−)-38 and (+)-38) and methyl ((−)-39 and (+)-39) compounds.
Molecules 28 07709 sch009
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Das, M.; Ward, G.W.; Sulima, A.; Luo, D.; Prisinzano, T.E.; Imler, G.H.; Kerr, A.T.; Jacobson, A.E.; Rice, K.C. Potent MOR Agonists from 2′-Hydroxy-5,9-dimethyl-N-phenethyl Substituted-6,7-benzomorphans and from C8-Hydroxy, Methylene and Methyl Derivatives of N-Phenethylnormetazocine. Molecules 2023, 28, 7709. https://doi.org/10.3390/molecules28237709

AMA Style

Das M, Ward GW, Sulima A, Luo D, Prisinzano TE, Imler GH, Kerr AT, Jacobson AE, Rice KC. Potent MOR Agonists from 2′-Hydroxy-5,9-dimethyl-N-phenethyl Substituted-6,7-benzomorphans and from C8-Hydroxy, Methylene and Methyl Derivatives of N-Phenethylnormetazocine. Molecules. 2023; 28(23):7709. https://doi.org/10.3390/molecules28237709

Chicago/Turabian Style

Das, Madhurima, George W. Ward, Agnieszka Sulima, Dan Luo, Thomas Edward Prisinzano, Gregory H. Imler, Andrew T. Kerr, Arthur E. Jacobson, and Kenner C. Rice. 2023. "Potent MOR Agonists from 2′-Hydroxy-5,9-dimethyl-N-phenethyl Substituted-6,7-benzomorphans and from C8-Hydroxy, Methylene and Methyl Derivatives of N-Phenethylnormetazocine" Molecules 28, no. 23: 7709. https://doi.org/10.3390/molecules28237709

Article Metrics

Back to TopTop