Postroenie diagramm vyazkosti shlakov, soderzhashchikh oksidy khroma i bora, metodom simpleksnykh reshetok

Cover Page

Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

Using the method of simplex lattices for experiment planning, the viscosity of slags of the CaO-SiO2-Cr2O3-3%Al2O3-8%MgO-6%B2O3 system was studied in a wide range of chemical composition. For each viscosity value, adequate mathematical models are obtained in the form of a reduced III degree polynomial. The results of mathematical modeling are presented graphically in the form of composition-viscosity diagrams. The range of compositions of the studied slags with a basicity of 1.5-2.0 has a high liquid mobility in the temperature range of 1600 -1700°C and their viscosity does not exceed 0.3 Pa·s.

About the authors

A. A Babenko

Institute of Metallurgy of the Ural Branch of the Russian Academy of Science, Ekaterinburg, Russia

Email: rr.shartdinov@gmail.com

R. R Shartdinov

Institute of Metallurgy of the Ural Branch of the Russian Academy of Science, Ekaterinburg, Russia

Email: rr.shartdinov@gmail.com

A. N Smetannikov

Institute of Metallurgy of the Ural Branch of the Russian Academy of Science, Ekaterinburg, Russia

Email: rr.shartdinov@gmail.com

D. A Lobanov

Institute of Metallurgy of the Ural Branch of the Russian Academy of Science, Ekaterinburg, Russia

Email: rr.shartdinov@gmail.com

A. G Upolovnikova

Institute of Metallurgy of the Ural Branch of the Russian Academy of Science, Ekaterinburg, Russia

Author for correspondence.
Email: rr.shartdinov@gmail.com

References

  1. Токовой, О.К. Аргонокислородное рафинирование нержавеющей стали / О.К. Токовой. - Челябинск: Издат. центр ЮУрГУ, 2015. 250 с.
  2. Visuri, V.-V. Mathematical model for the reduction stage of the AOD process. Pt. II. Model validation and results / V.-V. Visuri, M. J‡rvinen, J. Savolainen, P. Sulasalmi, E.-P. Heikkinen, T.A. Fabritius // ISIJ International. 2013. V.53. №4. P.613-612.
  3. Kalicka, Z. Application of the Iida model for estimation of slag viscosity for Al2O3-Cr2O3-CaO-CaF2 systems / Z. Kalicka, E. Kawecka-Cebula, K. Pytel // Arch. Metall. Mater. 2009. V.54. №1. P.179-187.
  4. Магидсон, И.А. Вязкость хромистых шлаков / И.А. Магидсон, А.С. Морозов, М.Ф. Сидоренко, Л.К. Косырев, В.П. Колесников // Изв. вузов. Чер. металлургия. 1973. №11. С.61-64.
  5. Дюдкин, Д.А. Внепечная металлургия стали: в 3 т. Т.3. / Д.А. Дюдкин, В.В. Кисиленко. - М.: Теплотехник, 2010. 544 c.
  6. Hong, X.P. Fluorine and acid pollutant within soil around three coal-rich areas in China / X.P. Hong Ph.D. Thesis, China University Mining and Technology, Beijing, China, 2018. Available online: http://cdmd.cnki.com.cn/Article/CDMD-11413-1018096977.htm (accessed on 18 October 2022).
  7. Zhao, Zh. Efect of the heating rate and premelting process on the melting point and volatilization of a fuorine-containing slag / Zh. Zhao, J. Zhao, Z. Tan, B. Qu, L. Lu, Ya. Cui // Scientific Reports. 2020. V.10. №1. Art.11254.
  8. Zhang, L. Effect of basicity and B2O3 on the viscosity and structure of fluorine-free mold flux / L. Zhang, W. Wang, S. Xie, K. Zhang, I. Sohn //j. Non-Crystalline Solids. 2017. V.460. P.113-118.
  9. Sun, Y. Effect of B2O3 on the structure and viscous behavior of Ti-bearing blast furnace slags / Y. Sun, J. Liao, K. Zheng, X. Wang, Z. Zhang // JOM. 2014. V.66. №10. P.2168-2175.
  10. Babenko, A.A. Theoretical bases and technology of steel exhaustive metal desulfurization and direct microalloying with boron beneath basic boron-containing slags / A.A. Babenko, L.A. Smirnov, A.G. Upolovnikova, A.N. Smetannikov, A.V. Sychev // Metallurgist. 2020. V.63. №11, 12. С.1259-1265.
  11. Ким, В.А. Планирование эксперимента при исследовании физико-химических свойств металлургических шлаков: методическое пособие / В.А. Ким, Э.И. Николай, А.А. Акбердин [и др.]. - Алма-Ата: Наука, 1989. 116 с.
  12. Бабенко, А.А. Изучение вязкости шлаков системы СаО-SiO2-В2О3-25%Al2O3-8%MgO / А.А. Бабенко, В.И. Жучков, А.Г. Уполовникова, И.Н. Кель // Изв. вузов. Чер. металлургия. 2017. Т.60. №10. С.820-825.
  13. Ким, В.А. Использование метода симплексных решеток для построения диаграмм типа состав-вязкость / В.А. Ким, А.А. Акбердин, И.С. Куликов [и др.] // Изв. вузов. Чер. металлургия. 1980. №9. С.167.

Copyright (c) 2023 Russian Academy of Sciences

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies