A Study of the Structure and Magnetic Properties
of the Soft Magnetic Ni80Cr20 Alloy Manufactured
by Additive Technology

A. S. Zhukov; Жуков А. С.; S. A. Manninen; Маннинен С. А.; M. A. Tit; Тит М. А.; A. V. Olisov; Олисов А. В.; T. V. Knyazyuk; Князюк Т. В.; P. A. Kuznetsov; Кузнецов П. А.

doi:10.31857/S0015323022601970

A Study of the Structure and Magnetic Properties of the Soft Magnetic Ni80Cr20 Alloy Manufactured by Additive Technology

Authors: Zhukov A.S.¹, Manninen S.A.¹, Tit M.A.², Olisov A.V.³, Knyazyuk T.V.¹, Kuznetsov P.A.¹
Affiliations:
1. NRC Kurchatov Institute CRISM Prometey
2. CSRI Elektropribor JSC
3. National Research Tomsk State University
Issue: Vol 124, No 4 (2023)
Pages: 353-359
Section: ЭЛЕКТРИЧЕСКИЕ И МАГНИТНЫЕ СВОЙСТВА
URL: https://journals.rcsi.science/0015-3230/article/view/139392
DOI: https://doi.org/10.31857/S0015323022601970
EDN: https://elibrary.ru/VIMXET
ID: 139392

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

The effects of heat treatment on the structure and magnetic properties of the 80NHS grade permalloy produced by selective laser melting (SLM) of gas-atomized powder are presented in comparison with the properties of the rolled 80NHS alloy. Ring samples either produced by SLM or machined from rolled metal have been studied. It has been established that the magnetic properties of the SLM samples are inferior to the properties of samples produced by thermomechanical processing because the structure of the additively
manufactured alloy is characterized by fine grains and a large number of nonmetallic inclusions.

Keywords

additive technologies, selective laser melting, gas atomization, metal powder, soft magnetic 80NHS alloy, magnetic properties, structure

References

Кекало И.Б., Самарин Б.А. Физическое металловедение прецизионных сплавов. Сплавы с особыми магнитными свойствами. М.: Металлургия, 1989. 496 с. ISBN: 5-229-00230-1.
Périgo E.A., Jacimovic J., García Ferré F., Scherf L.M. Additive Manufacturing of Magnetic Materials // Additive Manufacturing. 2019. V. 30. P. 100870. https://doi.org/10.1016/j.addma.2019.100870
Goll D., Schuller D., Martinek G., Kunert T., Schurr J., Sinz C., Schubert T., Bernthaler T., Riegel H., Schneider G. Additive manufacturing of soft magnetic materials and components // Additive Manufacturing. 2019. V. 27. P. 428–429. https://doi.org/10.1016/j.addma.2019.02.021
Mikler C., Chaudhary V., Borkar T., Soni V., Jaeger D., Chen X., Contieri R., Ramanujan R.V., Banerjee R. Laser Additive Manufacturing of Magnetic Materials // JOM: J. Miner. Met. & Mater. Soc. 2017. V. 3. P. 532–543. https://doi.org/10.1007/s11837-017-2257-2
Mikler C., Chaudhary V., Soni V., Gwalani B., Ramanujan R.V., Banerjee R. Tuning the phase stability and magnetic properties of laser additively processed Fe–30% Ni soft magnetic alloys // Mater. Letters. 2017. V. 199. P. 88–92. https://doi.org/10.1016/j.matlet.2017.04.054
Garibaldi M., Ashcroft I., Hillier N., Harmon S.A.C., Hague R. Relationship between laser energy input, microstructures and magnetic properties of selective laser melted Fe–6.9% wt Si soft magnets // Mater. Characterization. 2018. V. 143. P. 144–151. https://doi.org/10.1016/j.matchar.2018.01.016
Conteri R., Borkar T., Nag S., Jaeger D., Chen X., Ramanujan R.V., Banerjee R. Laser additive processing of Fe–Si–B–Cu–Nb magnetic alloys // J. Manufacturing Processes. 2017. V. 29. P. 175–181. https://doi.org/10.1016/j.matchar.2018.01.016
Jung H.Y., Choi S.J., Prashanth K.G., Stoica M., Scudino S., Yi S., Kühn U., Kim D.H., Kim K.B., Eckert J.H. Fabrication of Fe-based bulk metallic glass by selective laser melting: a parameter study // Mater. Design. 2015. V. 86. P. 703–708. https://doi.org/10.1016/j.matdes.2015.07.145
Lamarre J.M., Bernier F. Permanent Magnets Produced by Cold Spray Additive Manufacturing for Electric Engines // J. Thermal Spray Tech. 2019. V. 28. Issue 7. P. 1709–1717. https://doi.org/10.1007/s11666-019-00917-6
Hilzinger R., Rodewald W. Magnetic materials: fundamentals, products, properties, and applications. Hanau: VACUUMSCHMELZE, 2013. 608 p. ISBN: 3895783528.
ГОСТ 10994–74. Сплавы прецизионные. Марки. М.: Изд-во стандартов, 1974. 18 с.
ГОСТ 10160–75. Сплавы прецизионные магнитно-мягкие. Технические условия. М.: Изд-во стандартов, 1975. 49 с.
Pham M.-S., Dovgyy B., Hooper P.A., Gourlay C.M., Piglione A. The role of side-branching in microstructure development in laser powder-bed fusion // Nature Communications. 2020. V. 11. P. 000749. https://doi.org/10.1038/s41467-020-14453-3
Saeidi K., Gao X., Zhong Y., Shen Z.J. Hardened austenite steel with columnar sub-grain structure formed by laser melting // Mater. Sci. Eng. 2015. V. A625. P. 221–229. https://doi.org/10.1016/j.msea.2014.12.018
Старицын М.В., Петров С.Н., Кузнецов П.А., Михацлов М.С., Шакиров И.В. Композитная структура как упрочняющий фактор нержавеющей аустенитной хромоникелевой аддитивной стали // ФММ. 2020. Т. 121 № 4. С. 381–387. https://doi.org/10.37795/RCEM.2020.84.35.065
Deev A.A., Kuznetsov P.A., Petrov S.N. Anisotropy of mechanical properties and its correlation with the structure of the stainless steel 316L produced by the SLM method // Phys. Procedia. 2016. V. 83. P. 789–796. https://doi.org/10.1016/j.phpro.2016.08.081
Кузнецов П.А., Зисман А.А., Петров С.Н., Гончаров И.С. Структура и механические свойства аустенитной стали 316L, полученной методом селективного лазерного сплавления // Деформация и разрушение материалов. 2016. № 4. С. 9–13. https://doi.org/10.1134/S0036029516100104
Кархин В.А. Тепловые процессы при сварке. СПб: Изд-во Политехнического ун-та, 2013. 646 с. https://doi.org/10.18720/SPBPU/2/si20-491
Zhang B., Fenineche N.E., Liao H., Coddet C. Microstructure and Magnetic Properties of Fe–Ni Alloy Fabricated by Selective Laser Melting Fe/Ni Mixed Powders // JMST. 2013. V. 29. Issue 8. P. 757–760. https://doi.org/10.1016/j.jmst.2013.05.001
Mazeeva A.K., Staritsyn M.V., Bobyr V.V., Manninen S.A., Kuznetsov P.A., Klimov V.N. Magnetic properties of Fe–Ni permalloy produced by selective laser // J. Alloys Compounds. 2020. V. 814. P. 152 315. https://doi.org/10.1016/j.jallcom.2019.152315