Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter July 19, 2018

Analysis of strains in the fracture process zone

  • Rolf Wathén , Warren Batchelor , Bo Westerlind and Kaarlo Niskanen
From the journal Nordic Pulp & Paper Research Journal
https://doi.org/10.3183/npprj-2005-20-04-p392-398
Keywords: Fracture process zone; Breaking strain; Fiber orientation; Bonding; Drying shrinkage
Published Online: 2018-07-19
Published in Print: 2005-12-01

© 2018 by Walter de Gruyter Berlin/Boston

From the journal
Nordic Pulp & Paper Research Journal
Nordic Pulp & Paper Research Journal
Volume 20 Issue 4
Submit manuscript

Journal and Issue

Articles in the same Issue

Evaluation of PFI beating on the strain to failure of spruce fibres using single fibre fragmentation
Alternative models for describing the acid/base properties of bleached softwood fibres
The state and spatial distribution of extractives during birch kraft pulping, as evaluated by staining techniques
Analysis of strains in the fracture process zone
Rheology and surface tension of water-based flexographic inks and implications for wetting of PE-coated board
Influence of formulation and properties of water-based flexographic inks on printing performance for PE-coated board
From wood shavings to mechanical pulp – a new raw material?
A novel method for studying ink penetration of a print
The effect of di(oleamidoethyl)ammonium salt addition at the wet-end on drainage and sheet properties
Influence of birch xylan adsorption during kraft cooking on softwood pulp strength
Chemical pulp refining for optimum combination of dewatering and tensile strength
On the role of carbohydrates in oxygen delignification
Spreading and adhesion of ASA on different surfaces present in paper machines
High-speed measurements of pressure and temperature in the refining zone of a high-consistency refiner
Refining zone pressure in a mill-scale TMP refiner measured by fibre-optic sensors
Direct organic acid-catalyzed polyester derivatization of lignocellulosic material
The influence of thickeners on the surface structure of coatings evaluated by AFM and pair distribution function analysis
Quantification method for hydrogen peroxide formation during oxygen delignification of kraft pulp
Water- and oil-penetration resistances of handsheets prepared by internal addition of diperfluoroalkylethyl phosphate: Influence of cationic polymers co-added
EFFECT OF REFINING INTENSITY ON PRESSURE SCREEN FRACTIONATED SOFTWOOD KRAFT
ANNUAL INDEX FOR 2005
Downloaded on 12.6.2024 from https://www.degruyter.com/document/doi/10.3183/npprj-2005-20-04-p392-398/html
Scroll to top button