Abstract
A core-back polypropylene foaming injection process using chemical blowing agents (CBA) has been studied. First, injection tests were carried out with two different CBAs and the different morphologies of the obtained samples have been analyzed. Structural parameters such as cell density and average radius size were calculated. Then, a bubble growth model was developed to predict the foaming development during the process, controlled by the depressurization of the mold cavity during the short core-back opening coupled with the evolution of the temperature during core-back and subsequent cooling. A good agreement is found between theoretical predictions and experimental results.
References
Almanza, O., Rodriguez-Perez, M. A. and De Saja, J. A., “Measurement of the Thermal Diffusivity and Specific Heat of Polyethylene Foams Using the Transient Plane Source Technique”, Polym. Int., 53, 2038–2044 (2004) 10.1002/pi.1624Search in Google Scholar
Amon, M., Denson, C. D., “A Study of the Dynamics of Foam Growth: Analysis of the Growth of Closely Spaced Spherical Bubbles”, Polym. Eng. Sci., 24, 1026–1034 (1984) 10.1002/pen.760241306Search in Google Scholar
Behravesh, A. H., Park, C. B., Cheung, L. K. and Venter, R. D., “Extrusion of Polypropylene Foams with Hydrocerol and Isopentane”, J. Vinyl Add. Tech., 2, 349–357 (1996) 10.1002/vnl.10153Search in Google Scholar
Bikard, J., Bruchon, J., Coupez, T. and Vergnes, B., “Numerical Prediction of the Foam Structure of Polymeric Materials by Direct 3D Simulation of their Expansion by Chemical Reaction Based on a Multidomain Method”, J. Mater. Sci., 40, 5875–5881 (2005) 10.1007/s10853-005-5022-9Search in Google Scholar
Bociaga, E., Palutkiewicz, P., “The Influence of Injection Molding Parameters and Blowing Agent Addition on Selected Properties, Surface State, and Structure of HDPE Parts”, Polym. Eng. Sci., 53, 780–791 (2013) 10.1002/pen.23316Search in Google Scholar
Bruchon, J., Coupez, T., “A Numerical Strategy for the Direct 3D Simulation of the Expansion of Bubbles into a Molten Polymer During a Foaming Process”, Int. J. Num. Methods Fluids, 57, 977–1003 (2008) 10.1002/fld.1660Search in Google Scholar
Cha, S. W., Yoon, J. D., “The Relationship of Mold Temperatures and Swirl Marks on the Surface of Microcellular Plastics”, Polym. Plast. Technol. Eng., 44, 795–803 (2005) 10.1081/PTE-200060811Search in Google Scholar
Colton, J. S., Suh, N. P., “Nucleation of Microcellular Foam: Theory and Practice”, Polym. Eng. Sci., 27, 500–503 (1987) 10.1002/pen.760270702Search in Google Scholar
Gibson, L. J., Ashby, M. F.: Cellular Solids: Structure and Properties, 2nd Edition, Pergamon Press, Oxford (1998)10.1017/CBO9781139878326Search in Google Scholar
Guo, M. C., Santoni, A., Heuzey, M. C. and Carreau, P. J., “Occurrence of Surface Defects in TPO Injected Foam Parts”, J. Cell. Plast., 43, 273–296 (2007) 10.1177/0021955X07077191Search in Google Scholar
Ishikawa, T., Kentaro, T. and Ohshima, M., “Visual Observation and Numerical Studies of N2 vs. CO2 foaming Behavior in Core-Back Foam Injection Molding” Polym. Eng. Sci., 52, 875–883 (1996) 10.1002/pen.22154Search in Google Scholar
Joshi, K., Lee, J. G., Shafi, M. A. and Flumerfelt, R. W., “Prediction of Cellular Structure in Free Expansion of Viscoelastic Media”, J. Appl. Polym. Sci., 67, 1353–1368 (1998) 10.1002/(SICI)1097-4628(19980222)67:8<1353::AID-APP2>3.0.CO;2-DSearch in Google Scholar
Koopmans, R. J., Den Doelder, J. C. F. and Paquet, A. N., “Modeling Foam Growth in Thermoplastics”, Adv. Mater., 12, 1873–1880 (2000) 10.1002/1521-4095(200012)12:23<1873::AID-ADMA1873>3.0.CO;2-XSearch in Google Scholar
Lee, M., Park, C. B. and Tzoganakis, C., “Measurement and Modeling of PS/Supercritical CO2 Solution Viscosities”, Polym. Eng. Sci., 39, 99–109 (1999) 10.1002/pen.11400Search in Google Scholar
Lei, Z., Ohyabu, H., Sato, Y., Inomata, H. and Smith, R., “Solubility, Swelling Degree and Crystallinity of Carbon Dioxide-Polypropylene System”, J. Supercrit. Fluids, 40, 452–461 (2007) 10.1016/j.supflu.2006.07.016Search in Google Scholar
Medina, I., “Determination of Diffusion Coefficients for Supercritical Fluids”, J. Chromat., 1250, 124–140 (2012) 10.1016/j.chroma.2012.04.052Search in Google Scholar
Otsuki, Y., Kanai, T., “Numerical Simulation of Bubble Growth in Viscoelastic Fluid With Diffusion of Dissolved Foaming Agent”, Polym. Eng. Sci., 45, 1277–1288 (2005) 10.1002/pen.20395Search in Google Scholar
Park, C. B., Suh, N. P. “Filamentary Extrusion of Microcellular Polymers Using a Rapid Decompressive Element”, Polym. Eng. Sci., 36, 34–48 (1996) 10.1002/pen.10382Search in Google Scholar
Ruiz, J. A. Reglero, Vincent, M., Agassant, J.-F., Sadik, T., Pillon, C. and Carrot, C., “Polymer Foaming with Chemical Blowing Agents”, Polym. Eng. Sci., 55, 2018–2029 (2015) 10.1002/pen.24044Search in Google Scholar
Ruiz, J. A. Reglero, Agassant, J.-F. and Vincent, M., “Morphological Analysis of Microcellular PP Produced in a Core-Back Injection Process Using Chemical Blowing Agents and Gas Counter Pressure”, Polym. Eng. Sci., 55, 2465–2473 (2015) 10.1002/pen.24136Search in Google Scholar
Silva, L., Agassant, J. F. and Coupez, T., “Chapter No. 15 Three Dimensional Injection Molding Simulation”, in Injection Molding. Technology and Fundamentals, Kamal, M. R., Isayev, A., Liu, S. J. (Eds.), Hanser Publishers, Munich, p. 599–651 (2009) 10.3139/9783446433731.015Search in Google Scholar
Shafi, M. A., Lee, L. G. and Flumerfelt, R. W., “Prediction of Cellular Structure in Free Expansion Polymer Foam Processing”, Polym. Eng. Sci., 36, 1950–1959 (1996) 10.1002/pen.10591Search in Google Scholar
Shafi, M. A., Flumerfelt, R. W., “Initial Bubble Growth in Polymer Foaming Processes”, Chem. Eng. Sci., 52, 627–633 (1997) 10.1016/S0009-2509(96)00434-4Search in Google Scholar
Souheng, W., “Surface and Interfacial Tensions of Polymer Melts”, J. Phys. Chem., 74, 632–638 (1970)10.1021/j100698a026Search in Google Scholar
Taki, K., “Experimental and Numerical Studies on the Effects of Pressure Release Rate on Number Density of Bubbles and Bubble Growth in a Polymeric Foaming Process”, Chem. Eng. Sci., 63, 3643–3653 (2008) 10.1016/j.ces.2008.04.037Search in Google Scholar
Tomasko, D. L., Burley, A., Yeh, S.-K., Feng, L., Miyazono, K., Nirmal-Kumar, S., Kusaka, I. and Koelling, K., “Development of CO2 for Polymer Applications”, J. Supercrit. Fluids, 47, 493–499 (2009) 10.1016/j.supflu.2008.10.018Search in Google Scholar
Villamizar, C. A., Han, C. D., “Studies on Structural Foam Processing II: Bubble Dynamics in Foam Injection Molding”, Polym. Eng. Sci., 18, 699–710 (1978) 10.1002/pen.760180905Search in Google Scholar
Zhong, C., Masuoka, H., “Modeling of Gas Solubility in Polymers with Cubic Equations of State”, Ind. Eng. Chem. Res., 36, 2509–2513 (1997) 10.1021/ie970031bSearch in Google Scholar
© 2016, Carl Hanser Verlag, Munich
