Abstract
In injection molding, the injection pressure is often limited by the capacity of injection machines. Therefore, for large-volume part, multiple gates are needed so that the maximum flow path can be shortened, with a corresponding decrease in injection pressure. Many components produced by injection molding today require more than one gate. As multiple gates affect resin flow in a mold interactively, their locations might not be easily determined. For a mold with two gates, a pressure gradient search scheme (PGSS) is proposed to optimize their locations in this investigation. A search direction associated with pressure gradient is developed based on the physical nature of the mold-filling process. An alternative scheme based on genetic algorithm is also employed for comparison. Through minimizing the objective function of injection pressure, the optimum gates can be located to achieve balanced flow. Examples indicate that the proposed pressure gradient search scheme is more efficient than genetic algorithm for two gate location optimization.
References
1 Pandelidis, I., Zou, Q.: Poly. Eng. Sci.30(15), p. 883 (1990).10.1002/pen.760301503Search in Google Scholar
2 Britton, G. A., Deng, Y.-M., Lam, Y. C.: Journal of Injection Molding Technology6(4), p. 305 (2002).Search in Google Scholar
3 Lam, Y. C., Britton, G. A., Deng, Y.-M.: International Journal of Advanced Manufacturing Technology in press.Search in Google Scholar
4 Lee, B. H., Kim, B. H.: Polymer-Plastics Technology and Engineering34 (5), p. 793 (1995).10.1080/03602559508009600Search in Google Scholar
5 Park, S. J., Kwon, T. H.: Poly. Eng. Sci.38 (9), p. 1450 (1998).10.1002/pen.10316Search in Google Scholar
6 Lam, Y. C., Zhai, L.Y., Tai, K., Fok, S. C.: International Journal of Production Research in press.Search in Google Scholar
7 Lam, Y. C., Seow, L. W.: Poly. Eng. Sci.40 (6), p. 1273 (2000).10.1002/pen.11255Search in Google Scholar
8 Jin, S., Lam, Y. C.: Journal of Injection Molding Technology6 (4), p. 284 (2002).Search in Google Scholar
9 Pandelidis, I., Zhou, Q.: Poly. Eng. Sci.30 (15), p. 873 (1990).10.1002/pen.760301502Search in Google Scholar
10 Lam, Y. C., Jin, S.: Journal of Injection Molding Technology5 (3), p. 180 (2001).Search in Google Scholar
11 Gokce, A., Hsiao, K., Advani, S. G.: Composites: Part A, 33, p. 1263 (2002).10.1016/S1359-835X(02)00047-7Search in Google Scholar
12 Lee, B. H., Kim, B. H.: Polymer-Plastics Technology and Engineering35 (2), p. 253 (1996).10.1080/03602559608000583Search in Google Scholar
13 Young, W. B.: Journal of Composite Material12 (28), p. 1098 (1994).10.1177/002199839402801202Search in Google Scholar
© 2005, Carl Hanser Verlag, Munich
