Abstract
An analysis of the parameters of multi-stage controlled strip cooling during the process of rolling of 5.5 mm-diameter C70D high-carbon steel wire rod has been made in this publication. Investigations included also the analysis of the flow rate of the cooling medium and its pressure in the devices for accelerated and controlled cooling of the strip directly in the rolling line, as well as in the STELMOR line. The investigations carried out within the study have determined the cooling capacity of the accelerated strip cooling devices for specific (preset) cooling conditions. The scope of the investigations also encompassed the analysis of the effect of the employed cooling conditions on the temperature distribution and on the properties and microstructure of the steel studied. Moreover, physical modeling of the currently applicable technology of rolling the investigated steel grade was also performed.
Kurzfassung
Für den vorliegenden Beitrag wurde eine Analyse der Parameter während der multistationären kontrollierten Bandstreifenabkühlung während des Walzens eines 5,5 mm dicken kohlenstoffreichen C70D Walzdrahtes durchgeführt. Die Untersuchungen schlossen auch die Analyse der Durchflussgeschwindigkeit und des Druckes des Kühlmediums in den Anlagen für eine beschleunigte und kontrollierte Kühlung der Bandstreifen direkt in der Walzstraße sowie in der STELMOR-Linie ein. Die Untersuchungen der Studie führten dazu, dass die Kühlkapazität der Anlagen für die beschleunigte Abkühlung für die (vorbestimmten) Abkühlungsbedingungen festgelegt werden konnten. Außerdem wurden auch die angewandten Kühlbedingungen auf die Temperaturverteilung sowie die Eigenschaften und die Mikrostruktur des untersuchten Stahles analysiert. Darüber hinaus wurde auch ein physikalisches Modell der derzeitig anwendbaren Technik für das Walzen des untersuchten Stahltyps durchgeführt.
References
1 F.Grosman, D.Woźniak: Nowoczesne walcowanie walcówki (Modern wire rod rolling), Hutnik – Wiadomości Hutnicze, No. 3/2001, Sigma – Not Publishing House, Warsaw (2001), ISSN 1230-3534, pp. 97–104Search in Google Scholar
2 F.Grosman, D.Woźniak: Technologiczne aspekty walcowania walcówki z nowoczesnych stali (Engineering aspects of rolling wire rod of modern steels), Hutnik, Wiadomości Hutnicze, 11/2002, Sigma – Not Publishing House, Warsaw (2002), ISSN 1230-3534, pp. 408–414Search in Google Scholar
3 K.Laber: Modelowanie i optymalizacja procesów regulowanego walcowania i kontrolowanego chłodzenia wyrobów walcowni bruzdowych (Modeling and optimizing the processes of controlled rolling and controlled cooling of shape mill products), Joint monograph edited by Henryk Dyja, entitled: „Metalurgia 2009 – Nowe technologie i osiągnięcia” (Metallurgy 2009 – New technologies and achievements), Series: Monographs No. 1, Czestochowa University of Technology, Faculty of Process & Materials Engineering and Applied Physics, Publishing House of the Faculty of Process & Materials Engineering and Applied Physics of the Czestochowa University of Technology, ISBN 978-83-87745-13-4, ISBN 2080-2072, Czestochowa (2009), pp. 99–122Search in Google Scholar
4 K.Laber, H.Dyja: The effect of the normalizing rolling of S355J2G3 steel round bars on the selected mechanical properties of finished product, Solid State Phenomena165 (2010), pp. 294–29910.4028/www.scientific.net/SSP.165.294Search in Google Scholar
5 K.Laber, H.Dyja, M.Kwapisz: Wpływ warunków przyspieszonego chłodzenia w ciągu walcowniczym na mikrostrukturę prętów okrągłych gładkich o średnicy 30 mm (The effect of the conditions of accelerated cooling in the rolling line on the microstructure of 30 mm-diameter plain round bars), Hutnik-Wiadomości Hutnicze, A78 (2011) No. 5, pp. 392–395Search in Google Scholar
6 K.Laber, H.Dyja, S.Mróz: The influence of rolling temperature on the energy and force parameters during normalizing rolling of plain round bars, Materials Science Forum638–642 (2010), pp. 2628–263310.4028/www.scientific.net/MSF.638-642.2628Search in Google Scholar
© 2015, Carl Hanser Verlag, München