The Influence of Stirring Speed on Tensile strength of Fiberglass Composite using VARI Method

Farhan Rasyid Hidayat, Ferry Setiawan, Dhimas Wicaksono

Abstract


This study investigates the influence of stirring speeds variation (50 rpm, 100 rpm, and 150 rpm) on  tensile strength of fiberglass composite  fabricated by  Vacuum Assisted Resin Infusion (VARI) method. The VARI process involves injecting resin into dry fibers placed inside a plastic bag under low pressure, ensuring complete wetting of the fibers. The research aims to identify the optimal stirring speed for composite production by performing tensile tests. Results show that the stirring speed of 150 rpm yields the highest tensile strength, while the 50 rpm variation exhibits the lowest. Photomicrographs reveal the presence of voids in certain area , impacting composite density. The study concludes that stirring speed significantly affects tensile strength and density.


Keywords


Vacuum Infusion, Composite, Fiberglass, Microphoto, Tensile, Density

Full Text:

PDF

References


Alamsyah, Alamsyah Hidayat, Taufik Iskandar, Arif Nur (2020) .

Fandhy Rusmiyanto , (2007)

Putranto, Beny , (2011) .

Syahputra (2020) .




DOI: https://doi.org/10.31315/jmept.v4i1.10414

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Journal of Metallurgical Engineering and Processing Technology

Journal of Metallurgical Engineering and Processing Technology indexed by:

 




Journal of Metallurgical Engineering and Processing Technology (JMEPT)



Department of Metallurgical Engineering, UPN "Veteran" Yogyakarta
Metallurgical Research and Development Centre (MRDC)-UPNVY
Gd. Urip Sumohardjo Lt. 2
Jl. Babarsari No. 2, Tambakbayan, Yogyakarta 55281


View My Stats