Research Article
BibTex RIS Cite
Year 2019, Volume: 3 Issue: 3, 127 - 132, 01.07.2019
https://doi.org/10.31127/tuje.479458

Abstract

References

  • Aleksendrić, D., Barton, D.C. (2009). “Neural network prediction of disc brake performance.” Tribology International, Vol. 42, No. 7, pp. 1074-1080.
  • Aleksendric, D., Duboka, Č. (2006). “Prediction of automotive friction material characteristics using artificial neural networks-cold performance.” Wear, Vol. 261, No. 3-4, pp. 269-282.
  • Anoop, S., Natarajan, S., Babu, S.K. (2009). “Analysis of factors influencing dry sliding wear behaviour of Al/SiC p–brake pad tribosystem.” Materials & Design, Vol. 30, No. 9, pp. 3831-3838.
  • Asiltürk, I., Akkuş, H. (2011). “Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method.” Measurement, Vol. 44, No. 9, pp. 1697-1704.
  • Bijwe, J., Aranganathan, N., Sharma, S., Dureja, N., Kumar, R. (2012). “Nano-abrasives in friction materials-influence on tribological properties.” Wear, Vol. 296, No. 1-2, pp. 693-701.
  • Djafri, M., Bouchetara, M., Busch, C., Weber, S. (2014). “Effects of humidity and corrosion on the tribological behaviour of the brake disc materials.” Wear, Vol. 321, No. 1, pp. 8-15.
  • Ertan, R., Yavuz, N. (2010). “An experimental study on the effects of manufacturing parameters on the tribological properties of brake lining materials.” Wear, Vol. 268, No. 11-12, pp. 1524-1532.
  • Ficici, F., Durat, M., Kapsiz, M. (2014). “Optimization of tribological parameters for a brake pad using Taguchi design method.” Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 36, No. 3, pp. 653-659.
  • Gurunath, P.V., Bijwe, J. (2007). “Friction and wear studies on brake-pad materials based on newly developed resin.” Wear, Vol. 263, No. 7-12, pp. 1212-1219.
  • Kukutschová, J., Roubíček, V., Mašláň, M., Jančík, D., Slovák, V., Malachová, K., Filip, P. (2010). “Wear performance and wear debris of semimetallic automotive brake materials.” Wear, Vol. 268, No. 1-2, pp. 86-93.
  • Kumar, K.R., Mohanasundaram, K.M., Arumaikkannu, G., Subramanian, R. (2012). “Analysis of parameters influencing wear and frictional behavior of aluminum–fly ash composites.” Tribology Transactions, Vol. 55, No. 6, pp. 723-729.
  • Mutlu, I. (2009). “Artificial neural network modelling of non-asbestos brake lining performance boric acid in brake pad.” Information Technology Journal, Vol. 8, No. 3, pp. 389-402.
  • Myer, R.H., Montgomery, D.C. (2002). Response surface methodology: process and product optimization using designed experiment, John Wiley and Sons, New York, USA.
  • Phadke, M.S. (1995). Quality engineering using robust design, Prentice Hall PTR, Upper Saddle River, NJ, USA.
  • Sagbas, A., Kahraman, F., Esme, U. (2009). “Modeling and predicting abrasive wear behaviour of poly oxy methylenes using response surface methodolgy and neural Networks.” Metalurgija, Vol. 48, No. 2, pp. 117-120.
  • Singh, K.H., Kumar, A., Kumar, R. (2014). “Optimization of Quality and Performance of Brake Pads Using Taguchi’s Approach.” International Journal of Scientific & Engineering Research, Vol. 5, No. 7, pp. 632-639.
  • Sugözü, İ. (2015) “Investigation of using rice husk dust and ulexite in automotive brake pads.” Materials Testing, Vol. 57, No. 10, pp. 877-882.
  • Sugozu, I., Can, I., Oner, C. (2014). “The effect of borax on the friction performance of an automotive brake lining.” Materials Testing, Vol. 56, No. 5, pp. 362-368.
  • Sugozu, I., Can, I., Oner, C. (2014). “Investigation of using Calabrian pine cone dust and borax in brake pads.” Industrial Lubrication and Tribology, Vol. 66, No. 6, pp. 678-684.
  • Sugozu, I., Mutlu, I., Sugozu, K.B. (2016). “The effect of colemanite on the friction performance of automotive brake friction materials.” Industrial Lubrication and Tribology, Vol. 68, No. 1, pp. 92-98.
  • Sugozu, I., Mutlu, I., Sugozu, K.B. (2018). “The effect of ulexite to the tribological properties of brake lining materials.” Polymer Composites, Vol. 39, No. 1, pp. 55-62.
  • TS 555 (1992). Highway Vehicles-Brake System-Brake Pads for Friction Brake, Turkish Standard Institute, Ankara, Turkey.
  • Xiao, G., Zhu, Z. (2010). “Friction materials development by using DOE/RSM and artificial neural network.” Tribology International, Vol. 43, No. 1-2, pp. 218-227.
  • Yadav, R.N. (2017). “A hybrid approach of Taguchi-Response Surface Methodology for modeling and optimization of Duplex Turning process.” Measurement, Vol. 100, No. 1, pp. 131–138.
  • Zaharudin, A.M., Talib, R.J., Berhan, M.N., Budin, S., Aziurah, M.S. (2011). “Taguchi method for optimising the manufacturing parameters of friction materials.” Proceedings of Regional Tribology Conference, RTC, Langkawi Island, Malaysia, pp. 246-251.

AN INTEGRATED APPROACH BASED ON THE TAGUCHI METHOD AND RESPONSE SURFACE METHODOLOGY TO OPTIMIZE PARAMETER DESIGN OF ASBESTOS-FREE BRAKE PAD MATERIAL

Year 2019, Volume: 3 Issue: 3, 127 - 132, 01.07.2019
https://doi.org/10.31127/tuje.479458

Abstract

Braking pressure and sliding velocity can affect wear behavior of brake pad material, so sliding velocity and braking pressure is often regarded as the key factor in defining quality performance of this material. For this reason, Taguchi Method has been used to screen the variables that have significant effects on the wear rate. Furthermore, an integrated approach of Taguchi Method and Response Surface Methodology has been employed to improve an empirical model for predicting wear rate and optimization of control factors. It has been observed that an integrated approach based on Taguchi Method and Response Surface Methodology gives 15.45% lower wear rate as compared to optimal results obtained from Taguchi method.

References

  • Aleksendrić, D., Barton, D.C. (2009). “Neural network prediction of disc brake performance.” Tribology International, Vol. 42, No. 7, pp. 1074-1080.
  • Aleksendric, D., Duboka, Č. (2006). “Prediction of automotive friction material characteristics using artificial neural networks-cold performance.” Wear, Vol. 261, No. 3-4, pp. 269-282.
  • Anoop, S., Natarajan, S., Babu, S.K. (2009). “Analysis of factors influencing dry sliding wear behaviour of Al/SiC p–brake pad tribosystem.” Materials & Design, Vol. 30, No. 9, pp. 3831-3838.
  • Asiltürk, I., Akkuş, H. (2011). “Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method.” Measurement, Vol. 44, No. 9, pp. 1697-1704.
  • Bijwe, J., Aranganathan, N., Sharma, S., Dureja, N., Kumar, R. (2012). “Nano-abrasives in friction materials-influence on tribological properties.” Wear, Vol. 296, No. 1-2, pp. 693-701.
  • Djafri, M., Bouchetara, M., Busch, C., Weber, S. (2014). “Effects of humidity and corrosion on the tribological behaviour of the brake disc materials.” Wear, Vol. 321, No. 1, pp. 8-15.
  • Ertan, R., Yavuz, N. (2010). “An experimental study on the effects of manufacturing parameters on the tribological properties of brake lining materials.” Wear, Vol. 268, No. 11-12, pp. 1524-1532.
  • Ficici, F., Durat, M., Kapsiz, M. (2014). “Optimization of tribological parameters for a brake pad using Taguchi design method.” Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 36, No. 3, pp. 653-659.
  • Gurunath, P.V., Bijwe, J. (2007). “Friction and wear studies on brake-pad materials based on newly developed resin.” Wear, Vol. 263, No. 7-12, pp. 1212-1219.
  • Kukutschová, J., Roubíček, V., Mašláň, M., Jančík, D., Slovák, V., Malachová, K., Filip, P. (2010). “Wear performance and wear debris of semimetallic automotive brake materials.” Wear, Vol. 268, No. 1-2, pp. 86-93.
  • Kumar, K.R., Mohanasundaram, K.M., Arumaikkannu, G., Subramanian, R. (2012). “Analysis of parameters influencing wear and frictional behavior of aluminum–fly ash composites.” Tribology Transactions, Vol. 55, No. 6, pp. 723-729.
  • Mutlu, I. (2009). “Artificial neural network modelling of non-asbestos brake lining performance boric acid in brake pad.” Information Technology Journal, Vol. 8, No. 3, pp. 389-402.
  • Myer, R.H., Montgomery, D.C. (2002). Response surface methodology: process and product optimization using designed experiment, John Wiley and Sons, New York, USA.
  • Phadke, M.S. (1995). Quality engineering using robust design, Prentice Hall PTR, Upper Saddle River, NJ, USA.
  • Sagbas, A., Kahraman, F., Esme, U. (2009). “Modeling and predicting abrasive wear behaviour of poly oxy methylenes using response surface methodolgy and neural Networks.” Metalurgija, Vol. 48, No. 2, pp. 117-120.
  • Singh, K.H., Kumar, A., Kumar, R. (2014). “Optimization of Quality and Performance of Brake Pads Using Taguchi’s Approach.” International Journal of Scientific & Engineering Research, Vol. 5, No. 7, pp. 632-639.
  • Sugözü, İ. (2015) “Investigation of using rice husk dust and ulexite in automotive brake pads.” Materials Testing, Vol. 57, No. 10, pp. 877-882.
  • Sugozu, I., Can, I., Oner, C. (2014). “The effect of borax on the friction performance of an automotive brake lining.” Materials Testing, Vol. 56, No. 5, pp. 362-368.
  • Sugozu, I., Can, I., Oner, C. (2014). “Investigation of using Calabrian pine cone dust and borax in brake pads.” Industrial Lubrication and Tribology, Vol. 66, No. 6, pp. 678-684.
  • Sugozu, I., Mutlu, I., Sugozu, K.B. (2016). “The effect of colemanite on the friction performance of automotive brake friction materials.” Industrial Lubrication and Tribology, Vol. 68, No. 1, pp. 92-98.
  • Sugozu, I., Mutlu, I., Sugozu, K.B. (2018). “The effect of ulexite to the tribological properties of brake lining materials.” Polymer Composites, Vol. 39, No. 1, pp. 55-62.
  • TS 555 (1992). Highway Vehicles-Brake System-Brake Pads for Friction Brake, Turkish Standard Institute, Ankara, Turkey.
  • Xiao, G., Zhu, Z. (2010). “Friction materials development by using DOE/RSM and artificial neural network.” Tribology International, Vol. 43, No. 1-2, pp. 218-227.
  • Yadav, R.N. (2017). “A hybrid approach of Taguchi-Response Surface Methodology for modeling and optimization of Duplex Turning process.” Measurement, Vol. 100, No. 1, pp. 131–138.
  • Zaharudin, A.M., Talib, R.J., Berhan, M.N., Budin, S., Aziurah, M.S. (2011). “Taguchi method for optimising the manufacturing parameters of friction materials.” Proceedings of Regional Tribology Conference, RTC, Langkawi Island, Malaysia, pp. 246-251.
There are 25 citations in total.

Details

Primary Language English
Subjects Engineering
Journal Section Articles
Authors

Funda Kahraman This is me 0000-0003-4333-4943

Banu Sugözü 0000-0002-7798-2677

Publication Date July 1, 2019
Published in Issue Year 2019 Volume: 3 Issue: 3

Cite

APA Kahraman, F., & Sugözü, B. (2019). AN INTEGRATED APPROACH BASED ON THE TAGUCHI METHOD AND RESPONSE SURFACE METHODOLOGY TO OPTIMIZE PARAMETER DESIGN OF ASBESTOS-FREE BRAKE PAD MATERIAL. Turkish Journal of Engineering, 3(3), 127-132. https://doi.org/10.31127/tuje.479458
AMA Kahraman F, Sugözü B. AN INTEGRATED APPROACH BASED ON THE TAGUCHI METHOD AND RESPONSE SURFACE METHODOLOGY TO OPTIMIZE PARAMETER DESIGN OF ASBESTOS-FREE BRAKE PAD MATERIAL. TUJE. July 2019;3(3):127-132. doi:10.31127/tuje.479458
Chicago Kahraman, Funda, and Banu Sugözü. “AN INTEGRATED APPROACH BASED ON THE TAGUCHI METHOD AND RESPONSE SURFACE METHODOLOGY TO OPTIMIZE PARAMETER DESIGN OF ASBESTOS-FREE BRAKE PAD MATERIAL”. Turkish Journal of Engineering 3, no. 3 (July 2019): 127-32. https://doi.org/10.31127/tuje.479458.
EndNote Kahraman F, Sugözü B (July 1, 2019) AN INTEGRATED APPROACH BASED ON THE TAGUCHI METHOD AND RESPONSE SURFACE METHODOLOGY TO OPTIMIZE PARAMETER DESIGN OF ASBESTOS-FREE BRAKE PAD MATERIAL. Turkish Journal of Engineering 3 3 127–132.
IEEE F. Kahraman and B. Sugözü, “AN INTEGRATED APPROACH BASED ON THE TAGUCHI METHOD AND RESPONSE SURFACE METHODOLOGY TO OPTIMIZE PARAMETER DESIGN OF ASBESTOS-FREE BRAKE PAD MATERIAL”, TUJE, vol. 3, no. 3, pp. 127–132, 2019, doi: 10.31127/tuje.479458.
ISNAD Kahraman, Funda - Sugözü, Banu. “AN INTEGRATED APPROACH BASED ON THE TAGUCHI METHOD AND RESPONSE SURFACE METHODOLOGY TO OPTIMIZE PARAMETER DESIGN OF ASBESTOS-FREE BRAKE PAD MATERIAL”. Turkish Journal of Engineering 3/3 (July 2019), 127-132. https://doi.org/10.31127/tuje.479458.
JAMA Kahraman F, Sugözü B. AN INTEGRATED APPROACH BASED ON THE TAGUCHI METHOD AND RESPONSE SURFACE METHODOLOGY TO OPTIMIZE PARAMETER DESIGN OF ASBESTOS-FREE BRAKE PAD MATERIAL. TUJE. 2019;3:127–132.
MLA Kahraman, Funda and Banu Sugözü. “AN INTEGRATED APPROACH BASED ON THE TAGUCHI METHOD AND RESPONSE SURFACE METHODOLOGY TO OPTIMIZE PARAMETER DESIGN OF ASBESTOS-FREE BRAKE PAD MATERIAL”. Turkish Journal of Engineering, vol. 3, no. 3, 2019, pp. 127-32, doi:10.31127/tuje.479458.
Vancouver Kahraman F, Sugözü B. AN INTEGRATED APPROACH BASED ON THE TAGUCHI METHOD AND RESPONSE SURFACE METHODOLOGY TO OPTIMIZE PARAMETER DESIGN OF ASBESTOS-FREE BRAKE PAD MATERIAL. TUJE. 2019;3(3):127-32.
Flag Counter